[U-Boot] [PATCH 2/2] Makefile: move MTD-related lines in coherent Makefiles

[Boris Brezillon]

On Sun, 18 Nov 2018 21:07:32 +0100
Miquel Raynal <miquel.raynal at bootlin.com> wrote:

> A move has been started to move Makefile definitions out of the main
> root file and instead move these lines in their respective
> directory. This change does not change any logic already in place, it
> just moves lines to make the reading easier.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> ---
>  Makefile                  | 5 -----
>  drivers/Makefile          | 1 +
>  drivers/mtd/Makefile      | 3 +++
>  drivers/mtd/nand/Makefile | 4 +++-

As mentioned in my review of patch 1, patch 1 changes should be moved
there to keep things bisectable.

>  4 files changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/Makefile b/Makefile
> index 552687db53..435d0257dd 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -688,11 +688,6 @@ libs-y += drivers/
>  libs-y += drivers/dma/
>  libs-y += drivers/gpio/
>  libs-y += drivers/i2c/
> -libs-y += drivers/mtd/
> -libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
> -libs-y += drivers/mtd/onenand/
> -libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
> -libs-y += drivers/mtd/spi/
>  libs-y += drivers/net/
>  libs-y += drivers/net/phy/
>  libs-y += drivers/pci/
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 4453c62ad3..e407c529c4 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -99,6 +99,7 @@ obj-$(CONFIG_QE) += qe/
>  obj-$(CONFIG_U_QE) += qe/
>  obj-y += mailbox/
>  obj-y += memory/
> +obj-y += mtd/
>  obj-y += pwm/
>  obj-y += reset/
>  obj-y += input/
> diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
> index 22ceda93c0..f51ec473ea 100644
> --- a/drivers/mtd/Makefile
> +++ b/drivers/mtd/Makefile
> @@ -20,3 +20,6 @@ obj-$(CONFIG_STM32_FLASH) += stm32_flash.o
>  obj-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o
>  
>  obj-y += nand/
> +obj-y += onenand/
> +obj-y += spi/
> +obj-$(CONFIG_CMD_UBI) += ubi/
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 2c33447995..99ca69ef95 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -2,5 +2,7 @@
>  
>  nandcore-objs := core.o bbt.o
>  obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
> -obj-$(CONFIG_NAND) += raw/
> +ifneq (,$(findstring y,$(CONFIG_CMD_NAND)$(CONFIG_CMD_MTD)))
> +obj-y += raw/
> +endif
>  obj-$(CONFIG_MTD_SPI_NAND) += spi/

Let's get rid of that too by adding a 'select NAND' to the CMD_NAND
entry.

Also, there's no reason to select raw NAND support when CMD_MTD is
selected.