[U-Boot] [RESEND PATCH] board: toradex: turn off lcd backlight before OS handover
Philippe Schenker
dev at pschenker.ch
Mon Nov 19 14:54:10 UTC 2018
From: Gerard Salvatella <gerard.salvatella at toradex.com>
U-Boot typically tears down the display controller before handing
control over to Linux. On LCD displays disabling pixel clock leads to a
fading out effect with vertical/horizontal lines. Make sure to disable
back light before booting Linux.
Signed-off-by: Gerard Salvatella <gerard.salvatella at toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker at toradex.com>
---
board/toradex/apalis-tk1/apalis-tk1.c | 9 +++++++++
board/toradex/apalis_imx6/apalis_imx6.c | 9 +++++++++
board/toradex/apalis_t30/apalis_t30.c | 9 +++++++++
board/toradex/colibri_imx6/colibri_imx6.c | 9 +++++++++
board/toradex/colibri_imx7/colibri_imx7.c | 9 +++++++++
board/toradex/colibri_t20/colibri_t20.c | 9 +++++++++
board/toradex/colibri_t30/colibri_t30.c | 9 +++++++++
board/toradex/colibri_vf/colibri_vf.c | 12 +++++++++++-
8 files changed, 74 insertions(+), 1 deletion(-)
diff --git a/board/toradex/apalis-tk1/apalis-tk1.c b/board/toradex/apalis-tk1/apalis-tk1.c
index d6a736d8aa..b87e9e7a3e 100644
--- a/board/toradex/apalis-tk1/apalis-tk1.c
+++ b/board/toradex/apalis-tk1/apalis-tk1.c
@@ -240,3 +240,12 @@ void tegra_pcie_board_port_reset(struct tegra_pcie_port *port)
}
}
#endif /* CONFIG_PCI_TEGRA */
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+ gpio_request(TEGRA_GPIO(BB, 5), "BL_ON");
+ gpio_direction_output(TEGRA_GPIO(BB, 5), 0);
+}
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c
index 368db9c488..d11207c7f4 100644
--- a/board/toradex/apalis_imx6/apalis_imx6.c
+++ b/board/toradex/apalis_imx6/apalis_imx6.c
@@ -745,6 +745,15 @@ static void setup_display(void)
gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0);
gpio_direction_output(RGB_BACKLIGHT_GP, 1);
}
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+ gpio_direction_output(RGB_BACKLIGHTPWM_GP, 1);
+ gpio_direction_output(RGB_BACKLIGHT_GP, 0);
+}
#endif /* defined(CONFIG_VIDEO_IPUV3) */
int board_early_init_f(void)
diff --git a/board/toradex/apalis_t30/apalis_t30.c b/board/toradex/apalis_t30/apalis_t30.c
index ace9c5b168..df9bc8e707 100644
--- a/board/toradex/apalis_t30/apalis_t30.c
+++ b/board/toradex/apalis_t30/apalis_t30.c
@@ -164,3 +164,12 @@ void tegra_pcie_board_port_reset(struct tegra_pcie_port *port)
#endif /* CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT */
}
#endif /* CONFIG_PCI_TEGRA */
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+ gpio_request(TEGRA_GPIO(V, 2), "BKL1_ON");
+ gpio_direction_output(TEGRA_GPIO(V, 2), 0);
+}
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c
index 68c0c02a8a..17876f27e9 100644
--- a/board/toradex/colibri_imx6/colibri_imx6.c
+++ b/board/toradex/colibri_imx6/colibri_imx6.c
@@ -622,6 +622,15 @@ static void setup_display(void)
gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
gpio_direction_output(RGB_BACKLIGHT_GP, 1);
}
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+ gpio_direction_output(RGB_BACKLIGHTPWM_GP, 1);
+ gpio_direction_output(RGB_BACKLIGHT_GP, 0);
+}
#endif /* defined(CONFIG_VIDEO_IPUV3) */
int board_early_init_f(void)
diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c
index a4c99626b4..be027afd10 100644
--- a/board/toradex/colibri_imx7/colibri_imx7.c
+++ b/board/toradex/colibri_imx7/colibri_imx7.c
@@ -182,6 +182,15 @@ static int setup_lcd(void)
}
#endif
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+ gpio_direction_output(GPIO_PWM_A, 1);
+ gpio_direction_output(GPIO_BL_ON, 0);
+}
+
#ifdef CONFIG_FEC_MXC
static iomux_v3_cfg_t const fec1_pads[] = {
#ifndef CONFIG_COLIBRI_IMX7_EXT_PHYCLK
diff --git a/board/toradex/colibri_t20/colibri_t20.c b/board/toradex/colibri_t20/colibri_t20.c
index 5dd0f288ed..e0b27e92f8 100644
--- a/board/toradex/colibri_t20/colibri_t20.c
+++ b/board/toradex/colibri_t20/colibri_t20.c
@@ -150,4 +150,13 @@ void pin_mux_display(void)
pinmux_set_func(PMUX_PINGRP_SDC, PMUX_FUNC_PWM);
pinmux_tristate_disable(PMUX_PINGRP_SDC);
}
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+ gpio_request(TEGRA_GPIO(T, 4), "BL_ON");
+ gpio_direction_output(TEGRA_GPIO(T, 4), 0);
+}
#endif
diff --git a/board/toradex/colibri_t30/colibri_t30.c b/board/toradex/colibri_t30/colibri_t30.c
index 8ea96188f6..b6b00e3860 100644
--- a/board/toradex/colibri_t30/colibri_t30.c
+++ b/board/toradex/colibri_t30/colibri_t30.c
@@ -66,3 +66,12 @@ void pin_mux_usb(void)
udelay(5);
gpio_set_value(TEGRA_GPIO(DD, 0), 1);
}
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+ gpio_request(TEGRA_GPIO(V, 2), "BL_ON");
+ gpio_direction_output(TEGRA_GPIO(V, 2), 0);
+}
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 4db1757469..176c5201f9 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -38,8 +38,9 @@ DECLARE_GLOBAL_DATA_PTR;
#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
-#define USB_PEN_GPIO 83
+#define USB_PEN_GPIO 83
#define USB_CDET_GPIO 102
+#define PTC0_GPIO_45 45
static struct ddrmc_cr_setting colibri_vf_cr_settings[] = {
/* levelling */
@@ -640,3 +641,12 @@ int board_usb_phy_mode(int port)
}
}
#endif
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+ gpio_request(PTC0_GPIO_45, "BL_ON");
+ gpio_direction_output(PTC0_GPIO_45, 0);
+}
--
2.19.1
More information about the U-Boot
mailing list