[U-Boot] [PATCH 55/93] arm: Remove chiliboard board

Simon Glass sjg at chromium.org
Mon Nov 19 15:53:35 UTC 2018


This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/arm/Kconfig                            |   1 -
 arch/arm/include/asm/arch-am33xx/chilisom.h |  14 --
 arch/arm/mach-omap2/am33xx/chilisom.c       | 184 ------------------
 board/grinn/chiliboard/Kconfig              |  15 --
 board/grinn/chiliboard/MAINTAINERS          |   8 -
 board/grinn/chiliboard/Makefile             |   4 -
 board/grinn/chiliboard/README               |  31 ---
 board/grinn/chiliboard/board.c              | 205 --------------------
 configs/chiliboard_defconfig                |  47 -----
 include/configs/chiliboard.h                | 180 -----------------
 10 files changed, 689 deletions(-)
 delete mode 100644 arch/arm/include/asm/arch-am33xx/chilisom.h
 delete mode 100644 arch/arm/mach-omap2/am33xx/chilisom.c
 delete mode 100644 board/grinn/chiliboard/Kconfig
 delete mode 100644 board/grinn/chiliboard/MAINTAINERS
 delete mode 100644 board/grinn/chiliboard/Makefile
 delete mode 100644 board/grinn/chiliboard/README
 delete mode 100644 board/grinn/chiliboard/board.c
 delete mode 100644 configs/chiliboard_defconfig
 delete mode 100644 include/configs/chiliboard.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4cb32325ed3..b1eeb39d919 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1515,7 +1515,6 @@ source "board/freescale/ls1012aqds/Kconfig"
 source "board/freescale/ls1012ardb/Kconfig"
 source "board/freescale/ls1012afrdm/Kconfig"
 source "board/freescale/mx35pdk/Kconfig"
-source "board/grinn/chiliboard/Kconfig"
 source "board/gumstix/pepper/Kconfig"
 source "board/h2200/Kconfig"
 source "board/hisilicon/hikey/Kconfig"
diff --git a/arch/arm/include/asm/arch-am33xx/chilisom.h b/arch/arm/include/asm/arch-am33xx/chilisom.h
deleted file mode 100644
index 493be643116..00000000000
--- a/arch/arm/include/asm/arch-am33xx/chilisom.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2017 Grinn
- */
-
-#ifndef __ARCH_ARM_MACH_CHILISOM_SOM_H__
-#define __ARCH_ARM_MACH_CHILISOM_SOM_H__
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-void chilisom_enable_pin_mux(void);
-void chilisom_spl_board_init(void);
-#endif
-
-#endif
diff --git a/arch/arm/mach-omap2/am33xx/chilisom.c b/arch/arm/mach-omap2/am33xx/chilisom.c
deleted file mode 100644
index 39423051088..00000000000
--- a/arch/arm/mach-omap2/am33xx/chilisom.c
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
- * Copyright (C) 2017, Grinn - http://grinn-global.com/
- */
-
-#include <common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/clk_synthesizer.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/emif.h>
-#include <asm/io.h>
-#include <errno.h>
-#include <i2c.h>
-#include <power/tps65217.h>
-#include <spl.h>
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-static struct module_pin_mux i2c0_pin_mux[] = {
-	{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
-			PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
-	{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
-			PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
-	{-1},
-};
-
-static struct module_pin_mux nand_pin_mux[] = {
-	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
-	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
-	{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD2 */
-	{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD3 */
-	{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD4 */
-	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD5 */
-	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD6 */
-	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD7 */
-	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
-	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
-	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},	/* NAND_CS0 */
-	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
-	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* NAND_OE */
-	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* NAND_WEN */
-	{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},	/* NAND_BE_CLE */
-	{-1},
-};
-
-static void enable_i2c0_pin_mux(void)
-{
-	configure_module_pin_mux(i2c0_pin_mux);
-}
-
-void chilisom_enable_pin_mux(void)
-{
-	/* chilisom pin mux */
-	configure_module_pin_mux(nand_pin_mux);
-}
-
-static const struct ddr_data ddr3_chilisom_data = {
-	.datardsratio0 = MT41K256M16HA125E_RD_DQS,
-	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
-	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
-	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
-};
-
-static const struct cmd_control ddr3_chilisom_cmd_ctrl_data = {
-	.cmd0csratio = MT41K256M16HA125E_RATIO,
-	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
-
-	.cmd1csratio = MT41K256M16HA125E_RATIO,
-	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
-
-	.cmd2csratio = MT41K256M16HA125E_RATIO,
-	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
-};
-
-static struct emif_regs ddr3_chilisom_emif_reg_data = {
-	.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
-	.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
-	.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
-	.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
-	.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
-	.ocp_config = 0x00141414,
-	.zq_config = MT41K256M16HA125E_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
-};
-
-void chilisom_spl_board_init(void)
-{
-	int mpu_vdd;
-	int usb_cur_lim;
-
-	enable_i2c0_pin_mux();
-
-	/* Get the frequency */
-	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
-
-
-	if (i2c_probe(TPS65217_CHIP_PM))
-		return;
-
-	/*
-	 * Increase USB current limit to 1300mA or 1800mA and set
-	 * the MPU voltage controller as needed.
-	 */
-	if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
-		usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
-		mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
-	} else {
-		usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
-		mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
-	}
-
-	if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
-			       TPS65217_POWER_PATH,
-			       usb_cur_lim,
-			       TPS65217_USB_INPUT_CUR_LIMIT_MASK))
-		puts("tps65217_reg_write failure\n");
-
-	/* Set DCDC3 (CORE) voltage to 1.125V */
-	if (tps65217_voltage_update(TPS65217_DEFDCDC3,
-				    TPS65217_DCDC_VOLT_SEL_1125MV)) {
-		puts("tps65217_voltage_update failure\n");
-		return;
-	}
-	/* Set CORE Frequencies to OPP100 */
-	do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
-
-	/* Set DCDC2 (MPU) voltage */
-	if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
-		puts("tps65217_voltage_update failure\n");
-		return;
-	}
-
-	/* Set LDO3 to 1.8V and LDO4 to 3.3V */
-	if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
-			       TPS65217_DEFLS1,
-			       TPS65217_LDO_VOLTAGE_OUT_1_8,
-			       TPS65217_LDO_MASK))
-		puts("tps65217_reg_write failure\n");
-
-	if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
-			       TPS65217_DEFLS2,
-			       TPS65217_LDO_VOLTAGE_OUT_3_3,
-			       TPS65217_LDO_MASK))
-		puts("tps65217_reg_write failure\n");
-
-	/* Set MPU Frequency to what we detected now that voltages are set */
-	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
-}
-
-#define OSC	(V_OSCK/1000000)
-const struct dpll_params dpll_ddr_chilisom = {
-		400, OSC-1, 1, -1, -1, -1, -1};
-
-const struct dpll_params *get_dpll_ddr_params(void)
-{
-	return &dpll_ddr_chilisom;
-}
-
-const struct ctrl_ioregs ioregs_chilisom = {
-	.cm0ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
-	.cm1ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
-	.cm2ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
-	.dt0ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
-	.dt1ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
-};
-
-void sdram_init(void)
-{
-	config_ddr(400, &ioregs_chilisom,
-		   &ddr3_chilisom_data,
-		   &ddr3_chilisom_cmd_ctrl_data,
-		   &ddr3_chilisom_emif_reg_data, 0);
-}
-
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/board/grinn/chiliboard/Kconfig b/board/grinn/chiliboard/Kconfig
deleted file mode 100644
index 20056e81a14..00000000000
--- a/board/grinn/chiliboard/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_CHILIBOARD
-
-config SYS_BOARD
-	default "chiliboard"
-
-config SYS_VENDOR
-	default "grinn"
-
-config SYS_CONFIG_NAME
-	default "chiliboard"
-
-config SYS_SOC
-	default "am33xx"
-
-endif
diff --git a/board/grinn/chiliboard/MAINTAINERS b/board/grinn/chiliboard/MAINTAINERS
deleted file mode 100644
index 5eaccb27915..00000000000
--- a/board/grinn/chiliboard/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-CHILIBOARD
-M:	Marcin Niestroj <m.niestroj at grinn-global.com>
-S:	Maintained
-F:	arch/arm/include/asm/arch-am33xx/chilisom.h
-F:	arch/arm/mach-omap2/am33xx/chilisom.c
-F:	board/grinn/chiliboard/
-F:	include/configs/chiliboard.h
-F:	configs/chiliboard_defconfig
diff --git a/board/grinn/chiliboard/Makefile b/board/grinn/chiliboard/Makefile
deleted file mode 100644
index 2c33ccdbf2d..00000000000
--- a/board/grinn/chiliboard/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-# (C) Copyright 2017 Grinn
-
-obj-y  := board.o
diff --git a/board/grinn/chiliboard/README b/board/grinn/chiliboard/README
deleted file mode 100644
index cea4c1d42e7..00000000000
--- a/board/grinn/chiliboard/README
+++ /dev/null
@@ -1,31 +0,0 @@
-How to use U-Boot on Grinn's chiliBoard
---------------------------------------
-
-- Build U-Boot for chiliBoard:
-
-$ make mrproper
-$ make chiliboard_defconfig
-$ make
-
-This will generate the SPL image called MLO and the u-boot.img.
-
-- Flash the SPL image into the micro SD card:
-
-sudo dd if=MLO of=/dev/mmcblk0 bs=128k; sync
-
-- Flash the u-boot.img image into the micro SD card:
-
-sudo dd if=u-boot.img of=/dev/mmcblk0 bs=128k seek=3; sync
-
-- Jumper settings:
-
-S2: 1 1 1 0 1 0
-
-where 0 means bottom position and 1 means top position (from the
-switch label numbers reference).
-
-- Insert the micro SD card in the board.
-
-- Connect USB cable between chiliBoard and the PC for the power and console.
-
-- U-Boot messages should come up.
diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c
deleted file mode 100644
index 73a7d8281cc..00000000000
--- a/board/grinn/chiliboard/board.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
- * Copyright (C) 2017, Grinn - http://grinn-global.com/
- */
-
-#include <common.h>
-#include <asm/arch/chilisom.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/emif.h>
-#include <asm/io.h>
-#include <cpsw.h>
-#include <environment.h>
-#include <errno.h>
-#include <miiphy.h>
-#include <serial.h>
-#include <spl.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static __maybe_unused struct ctrl_dev *cdev =
-	(struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-static struct module_pin_mux uart0_pin_mux[] = {
-	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
-	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},		/* UART0_TXD */
-	{-1},
-};
-
-static struct module_pin_mux mmc0_pin_mux[] = {
-	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
-	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
-	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT1 */
-	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT0 */
-	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
-	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
-	{-1},
-};
-
-static struct module_pin_mux rmii1_pin_mux[] = {
-	{OFFSET(mii1_crs), MODE(1) | RXACTIVE},		/* RMII1_CRS */
-	{OFFSET(mii1_rxerr), MODE(1) | RXACTIVE},	/* RMII1_RXERR */
-	{OFFSET(mii1_txen), MODE(1)},			/* RMII1_TXEN */
-	{OFFSET(mii1_txd1), MODE(1)},			/* RMII1_TXD1 */
-	{OFFSET(mii1_txd0), MODE(1)},			/* RMII1_TXD0 */
-	{OFFSET(mii1_rxd1), MODE(1) | RXACTIVE},	/* RMII1_RXD1 */
-	{OFFSET(mii1_rxd0), MODE(1) | RXACTIVE},	/* RMII1_RXD0 */
-	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
-	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
-	{OFFSET(rmii1_refclk), MODE(0) | RXACTIVE},	/* RMII1_REFCLK */
-	{-1},
-};
-
-static void enable_board_pin_mux(void)
-{
-	chilisom_enable_pin_mux();
-
-	/* chiliboard pinmux */
-	configure_module_pin_mux(rmii1_pin_mux);
-	configure_module_pin_mux(mmc0_pin_mux);
-}
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#ifndef CONFIG_DM_SERIAL
-struct serial_device *default_serial_console(void)
-{
-	return &eserial1_device;
-}
-#endif
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-void set_uart_mux_conf(void)
-{
-	configure_module_pin_mux(uart0_pin_mux);
-}
-
-void set_mux_conf_regs(void)
-{
-	enable_board_pin_mux();
-}
-
-void am33xx_spl_board_init(void)
-{
-	chilisom_spl_board_init();
-}
-#endif
-
-/*
- * Basic board specific setup.  Pinmux has been handled already.
- */
-int board_init(void)
-{
-#if defined(CONFIG_HW_WATCHDOG)
-	hw_watchdog_init();
-#endif
-
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-	gpmc_init();
-
-	return 0;
-}
-
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-#if !defined(CONFIG_SPL_BUILD)
-	uint8_t mac_addr[6];
-	uint32_t mac_hi, mac_lo;
-
-	/* try reading mac address from efuse */
-	mac_lo = readl(&cdev->macid0l);
-	mac_hi = readl(&cdev->macid0h);
-	mac_addr[0] = mac_hi & 0xFF;
-	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-	mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-	mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-	mac_addr[4] = mac_lo & 0xFF;
-	mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
-	if (!env_get("ethaddr")) {
-		printf("<ethaddr> not set. Validating first E-fuse MAC\n");
-
-		if (is_valid_ethaddr(mac_addr))
-			eth_env_set_enetaddr("ethaddr", mac_addr);
-	}
-
-	mac_lo = readl(&cdev->macid1l);
-	mac_hi = readl(&cdev->macid1h);
-	mac_addr[0] = mac_hi & 0xFF;
-	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-	mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-	mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-	mac_addr[4] = mac_lo & 0xFF;
-	mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
-	if (!env_get("eth1addr")) {
-		if (is_valid_ethaddr(mac_addr))
-			eth_env_set_enetaddr("eth1addr", mac_addr);
-	}
-#endif
-
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_DM_ETH) && defined(CONFIG_DRIVER_TI_CPSW) && \
-	!defined(CONFIG_SPL_BUILD)
-static void cpsw_control(int enabled)
-{
-	/* VTP can be added here */
-
-	return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-	{
-		.slave_reg_ofs	= 0x208,
-		.sliver_reg_ofs	= 0xd80,
-		.phy_addr	= 0,
-	}
-};
-
-static struct cpsw_platform_data cpsw_data = {
-	.mdio_base		= CPSW_MDIO_BASE,
-	.cpsw_base		= CPSW_BASE,
-	.mdio_div		= 0xff,
-	.channels		= 8,
-	.cpdma_reg_ofs		= 0x800,
-	.slaves			= 1,
-	.slave_data		= cpsw_slaves,
-	.ale_reg_ofs		= 0xd00,
-	.ale_entries		= 1024,
-	.host_port_reg_ofs	= 0x108,
-	.hw_stats_reg_ofs	= 0x900,
-	.bd_ram_ofs		= 0x2000,
-	.mac_control		= (1 << 5),
-	.control		= cpsw_control,
-	.host_port_num		= 0,
-	.version		= CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
-	int rv, n = 0;
-
-	writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
-	cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII;
-
-	rv = cpsw_register(&cpsw_data);
-	if (rv < 0)
-		printf("Error %d registering CPSW switch\n", rv);
-	else
-		n += rv;
-
-	return n;
-}
-#endif
diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig
deleted file mode 100644
index b6cde09d6f3..00000000000
--- a/configs/chiliboard_defconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_AM33XX=y
-CONFIG_TARGET_CHILIBOARD=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTDELAY=1
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_DEFAULT_FDT_FILE="am335x-chiliboard.dtb"
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_POWER_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=8000000.nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nand:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_DM_GPIO=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NAND=y
-CONFIG_DRIVER_TI_CPSW=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_DSPS=y
-CONFIG_USB_STORAGE=y
-CONFIG_FAT_WRITE=y
-CONFIG_LZO=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
deleted file mode 100644
index 4372280d2bb..00000000000
--- a/include/configs/chiliboard.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2017 Grinn - http://grinn-global.com/
- */
-
-#ifndef __CONFIG_CHILIBOARD_H
-#define __CONFIG_CHILIBOARD_H
-
-#include <configs/ti_am335x_common.h>
-
-#ifndef CONFIG_SPL_BUILD
-# define CONFIG_TIMESTAMP
-#endif
-
-/* Clock Defines */
-#define V_OSCK				24000000  /* Clock output from T2 */
-#define V_SCLK				(V_OSCK)
-
-#define NANDARGS \
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-	"nandargs=setenv bootargs console=${console} ${optargs} " \
-		"${mtdparts} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
-	"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \
-	"nandrootfstype=ubifs rootwait=1\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${fdt_addr} NAND.u-boot-spl-os; " \
-		"nand read ${loadaddr} NAND.kernel; " \
-		"bootz ${loadaddr} - ${fdt_addr}\0"
-
-#define CONFIG_BOOTCOMMAND \
-	"run mmcboot; " \
-	"run nandboot; " \
-	"run netboot"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x82000000\0" \
-	"fdt_addr=0x87800000\0" \
-	"boot_fdt=try\0" \
-	"console=ttyO0,115200n8\0" \
-	"image=zImage\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"ip_dyn=yes\0" \
-	"optargs=\0" \
-	"loadbootscript=" \
-		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
-		"${boot_dir}/${image}\0" \
-	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} " \
-		"${boot_dir}/${fdt_file}\0" \
-	"mmcdev=0\0" \
-	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} ${optargs} " \
-		"${mtdparts} " \
-		"root=${mmcroot}\0" \
-	"mmcloados=run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"mmcboot=mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"echo SD/MMC found on device ${mmcdev};" \
-			"if run loadimage; then " \
-				"run mmcloados;" \
-			"fi;" \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} ${optargs} " \
-		"${mtdparts} " \
-		"root=/dev/nfs " \
-		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-	"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	NANDARGS
-
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
-#define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
-#define CONFIG_SYS_NS16550_COM3		0x48024000	/* UART2 */
-#define CONFIG_SYS_NS16550_COM4		0x481a6000	/* UART3 */
-#define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
-#define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
-
-/* PMIC support */
-#define CONFIG_POWER_TPS65217
-
-/* SPL */
-/* Bootcount using the RTC block */
-#define CONFIG_SYS_BOOTCOUNT_BE
-
-/* NAND: device related configs */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-/* NAND: driver related configs */
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
-					 10, 11, 12, 13, 14, 15, 16, 17, \
-					 18, 19, 20, 21, 22, 23, 24, 25, \
-					 26, 27, 28, 29, 30, 31, 32, 33, \
-					 34, 35, 36, 37, 38, 39, 40, 41, \
-					 42, 43, 44, 45, 46, 47, 48, 49, \
-					 50, 51, 52, 53, 54, 55, 56, 57, }
-
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
-/* NAND: SPL related configs */
-
-/* USB configuration */
-#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
-#define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
-#undef CONFIG_TIMER
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_OFFSET		0x001c0000
-#define CONFIG_ENV_OFFSET_REDUND	0x001e0000
-#define CONFIG_ENV_SIZE			SZ_128K
-#define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_SYS_NAND_BLOCK_SIZE
-#else
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_OFFSET		SZ_128K
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE			SZ_8K
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#endif
-
-/* Network. */
-#define CONFIG_PHY_SMSC
-
-#endif	/* ! __CONFIG_CHILIBOARD_H */
-- 
2.19.1.1215.g8438c0b245-goog



More information about the U-Boot mailing list