[U-Boot] [PATCH 63/93] arm: Remove vinco board
Simon Glass
sjg at chromium.org
Mon Nov 19 15:53:43 UTC 2018
This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/mach-at91/Kconfig | 1 -
board/l+g/vinco/Kconfig | 12 --
board/l+g/vinco/MAINTAINERS | 6 -
board/l+g/vinco/Makefile | 1 -
board/l+g/vinco/vinco.c | 212 ------------------------------------
configs/vinco_defconfig | 40 -------
include/configs/vinco.h | 118 --------------------
7 files changed, 390 deletions(-)
delete mode 100644 board/l+g/vinco/Kconfig
delete mode 100644 board/l+g/vinco/MAINTAINERS
delete mode 100644 board/l+g/vinco/Makefile
delete mode 100644 board/l+g/vinco/vinco.c
delete mode 100644 configs/vinco_defconfig
delete mode 100644 include/configs/vinco.h
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a879e79af2d..5c1791681fb 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -281,7 +281,6 @@ source "board/atmel/sama5d4ek/Kconfig"
source "board/calao/usb_a9263/Kconfig"
source "board/egnite/ethernut5/Kconfig"
source "board/esd/meesc/Kconfig"
-source "board/l+g/vinco/Kconfig"
source "board/mini-box/picosam9g45/Kconfig"
source "board/ronetix/pm9261/Kconfig"
source "board/ronetix/pm9263/Kconfig"
diff --git a/board/l+g/vinco/Kconfig b/board/l+g/vinco/Kconfig
deleted file mode 100644
index 229b5ea129f..00000000000
--- a/board/l+g/vinco/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_VINCO
-
-config SYS_BOARD
- default "vinco"
-
-config SYS_VENDOR
- default "l+g"
-
-config SYS_CONFIG_NAME
- default "vinco"
-
-endif
diff --git a/board/l+g/vinco/MAINTAINERS b/board/l+g/vinco/MAINTAINERS
deleted file mode 100644
index 0cd6044172a..00000000000
--- a/board/l+g/vinco/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-VInCo Platform
-M: Gregory CLEMENT <gregory.clement at free-electrons.com>
-S: Maintained
-F: board/l+g/vinco
-F: include/configs/vinco.h
-F: configs/vinco_defconfig
diff --git a/board/l+g/vinco/Makefile b/board/l+g/vinco/Makefile
deleted file mode 100644
index a2b8a2bc4a4..00000000000
--- a/board/l+g/vinco/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += vinco.o
diff --git a/board/l+g/vinco/vinco.c b/board/l+g/vinco/vinco.c
deleted file mode 100644
index 029ab123918..00000000000
--- a/board/l+g/vinco/vinco.c
+++ /dev/null
@@ -1,212 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Board file for the VInCo platform
- * Based on the the SAMA5-EK board file
- * Configuration settings for the VInCo platform.
- * Copyright (C) 2014 Atmel
- * Bo Shen <voice.shen at atmel.com>
- * Copyright (C) 2015 Free Electrons
- * Gregory CLEMENT <gregory.clement at free-electrons.com>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/atmel_mpddrc.h>
-#include <asm/arch/atmel_usba_udc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/sama5d3_smc.h>
-#include <asm/arch/sama5d4.h>
-#include <atmel_hlcdc.h>
-#include <atmel_mci.h>
-#include <lcd.h>
-#include <mmc.h>
-#include <net.h>
-#include <netdev.h>
-#include <nand.h>
-#include <spi.h>
-#include <version.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* FIXME gpio code here need to handle through DM_GPIO */
-#ifndef CONFIG_DM_SPI
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
-}
-
-static void vinco_spi0_hw_init(void)
-{
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
-
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_SPI0);
-}
-#endif /* CONFIG_ATMEL_SPI */
-
-
-#ifdef CONFIG_CMD_USB
-static void vinco_usb_hw_init(void)
-{
- at91_set_pio_output(AT91_PIO_PORTE, 11, 0);
- at91_set_pio_output(AT91_PIO_PORTE, 12, 0);
- at91_set_pio_output(AT91_PIO_PORTE, 10, 0);
-}
-#endif
-
-
-#ifdef CONFIG_GENERIC_ATMEL_MCI
-void vinco_mci0_hw_init(void)
-{
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI0 CDA */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI0 DA0 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI0 DA1 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI0 DA2 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI0 DA3 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI0 DA4 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI0 DA5 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI0 DA6 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI0 DA7 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI0 CLK */
-
- /*
- * As the mci io internal pull down is too strong, so if the io needs
- * external pull up, the pull up resistor will be very small, if so
- * the power consumption will increase, so disable the interanl pull
- * down to save the power.
- */
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_MCI0);
-}
-
-int board_mmc_init(bd_t *bis)
-{
- /* Enable power for MCI0 interface */
- at91_set_pio_output(AT91_PIO_PORTE, 7, 1);
-
- return atmel_mci_init((void *)ATMEL_BASE_MCI0);
-}
-#endif /* CONFIG_GENERIC_ATMEL_MCI */
-
-#ifdef CONFIG_MACB
-void vinco_macb0_hw_init(void)
-{
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_GMAC0);
-
- /* Enable Phy*/
- at91_set_pio_output(AT91_PIO_PORTE, 8, 1);
-}
-#endif
-
-static void vinco_serial3_hw_init(void)
-{
- at91_pio3_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */
- at91_pio3_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_USART3);
-}
-
-int board_early_init_f(void)
-{
- at91_periph_clk_enable(ATMEL_ID_PIOA);
- at91_periph_clk_enable(ATMEL_ID_PIOB);
- at91_periph_clk_enable(ATMEL_ID_PIOC);
- at91_periph_clk_enable(ATMEL_ID_PIOD);
- at91_periph_clk_enable(ATMEL_ID_PIOE);
-
- vinco_serial3_hw_init();
-
- return 0;
-}
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifndef CONFIG_DM_SPI
- vinco_spi0_hw_init();
-#endif
-
-#ifdef CONFIG_GENERIC_ATMEL_MCI
- vinco_mci0_hw_init();
-#endif
-#ifdef CONFIG_MACB
- vinco_macb0_hw_init();
-#endif
-#ifdef CONFIG_CMD_USB
- vinco_usb_hw_init();
-#endif
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- at91_udp_hw_init();
-#endif
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
- CONFIG_SYS_SDRAM_SIZE);
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
-#endif
-
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- usba_udc_probe(&pdata);
-#ifdef CONFIG_USB_ETH_RNDIS
- usb_eth_initialize(bis);
-#endif
-#endif
-
- return rc;
-}
diff --git a/configs/vinco_defconfig b/configs/vinco_defconfig
deleted file mode 100644
index 0130ad43377..00000000000
--- a/configs/vinco_defconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x20f00000
-CONFIG_TARGET_VINCO=y
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SPI_BOOT=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656"
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="vinco => "
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPT=y
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_FAT=y
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="at91-vinco"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="L+G VInCo"
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ETHER=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_SMSC95XX=y
diff --git a/include/configs/vinco.h b/include/configs/vinco.h
deleted file mode 100644
index 9d6001ff03c..00000000000
--- a/include/configs/vinco.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration settings for the VInCo platform.
- *
- * Based on the settings for the SAMA5-EK board
- * Copyright (C) 2014 Atmel
- * Bo Shen <voice.shen at atmel.com>
- * Copyright (C) 2015 Free Electrons
- * Gregory CLEMENT gregory.clement at free-electrons.com
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "at91-sama5_common.h"
-
-/* The value in the common file is too far away for the VInCo platform */
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE 0xfc00c000
-#define CONFIG_USART_ID 30
-
-/* Timer */
-#define CONFIG_SYS_TIMER_COUNTER 0xfc06863c
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE 0x20000000
-#define CONFIG_SYS_SDRAM_SIZE 0x4000000
-
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-/* SerialFlash */
-
-#ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI0
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS 0
-#define CONFIG_SF_DEFAULT_SPEED 50000000
-#define CONFIG_ENV_SPI_MAX_HZ 50000000
-#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
-#define CONFIG_ENV_SPI_MODE (SPI_MODE_0)
-#endif
-
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_GENERIC_ATMEL_MCI
-#define ATMEL_BASE_MMCI 0xfc000000
-#define CONFIG_SYS_MMC_CLK_OD 500000
-
-/* For generating MMC partitions */
-
-#endif
-
-/* USB device */
-
-/* Ethernet Hardware */
-#define CONFIG_PHY_SMSC
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_MACB_SEARCH_PHY
-
-#ifdef CONFIG_SPI_BOOT
-/* bootstrap + u-boot + env + linux in serial flash */
-#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
-/* Use our own mapping for the VInCo platform */
-#undef CONFIG_ENV_OFFSET
-#undef CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_OFFSET 0x10000
-#define CONFIG_ENV_SIZE 0x10000
-
-/* Update the bootcommand according to our mapping for the VInCo platform */
-#undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "mmc dev 0 0;" \
- "mmc read ${loadaddr} ${k_offset} ${k_blksize};" \
- "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \
- "bootz ${loadaddr} - ${oftaddr}"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_start=0x20000\0" \
- "kernel_size=0x800000\0" \
- "mmcblksize=0x200\0" \
- "oftaddr=0x21000000\0" \
- "loadaddr=0x22000000\0" \
- "update_uboot=tftp ${loadaddr} u-boot.bin;sf probe 0;" \
- "sf erase 0x20000 0x4B000; sf write ${loadaddr} 0x20000 0x4B000\0" \
- "create_partition=setexpr dtb_start ${kernel_start} + 0x400000;" \
- "setexpr rootfs_start ${kernel_start} + ${kernel_size};" \
- "setenv partitions 'name=kernel,size=${kernel_size}," \
- "start=${kernel_start};name=rootfs,size=-';" \
- "gpt write mmc 0 ${partitions} \0"\
- "f2blk_size=setexpr fileblksize ${filesize} / ${mmcblksize};" \
- "setexpr fileblksize ${fileblksize} + 1\0" \
- "store_kernel=tftp ${loadaddr} zImage; run f2blk_size;" \
- "setexpr k_blksize ${fileblksize};" \
- "setexpr k_offset ${kernel_start} / ${mmcblksize};" \
- "mmc write ${fileaddr} ${k_offset} ${fileblksize}\0" \
- "store_dtb=tftp ${loadaddr} at91-vinco.dtb; run f2blk_size;" \
- "setexpr dtb_blksize ${fileblksize};" \
- "setexpr dtb_offset ${dtb_start} / ${mmcblksize};" \
- "mmc write ${fileaddr} ${dtb_offset} ${fileblksize}\0" \
- "store_rootfs=tftp ${loadaddr} vinco-gateway-image-vinco.ext4;" \
- "setexpr rootfs_offset ${rootfs_start} / ${mmcblksize};" \
- "mmc write ${fileaddr} ${rootfs_offset} ${fileblksize}\0" \
- "bootdelay=0\0"
-
-#endif
-
-#endif
--
2.19.1.1215.g8438c0b245-goog
More information about the U-Boot
mailing list