[U-Boot] [PATCH 65/93] arm: Remove mx6cuboxi board
Simon Glass
sjg at chromium.org
Mon Nov 19 15:53:45 UTC 2018
This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/mach-imx/mx6/Kconfig | 1 -
board/solidrun/mx6cuboxi/Kconfig | 12 -
board/solidrun/mx6cuboxi/MAINTAINERS | 6 -
board/solidrun/mx6cuboxi/Makefile | 7 -
board/solidrun/mx6cuboxi/README | 21 -
board/solidrun/mx6cuboxi/mx6cuboxi.c | 857 ---------------------------
configs/mx6cuboxi_defconfig | 43 --
include/configs/mx6cuboxi.h | 149 -----
8 files changed, 1096 deletions(-)
delete mode 100644 board/solidrun/mx6cuboxi/Kconfig
delete mode 100644 board/solidrun/mx6cuboxi/MAINTAINERS
delete mode 100644 board/solidrun/mx6cuboxi/Makefile
delete mode 100644 board/solidrun/mx6cuboxi/README
delete mode 100644 board/solidrun/mx6cuboxi/mx6cuboxi.c
delete mode 100644 configs/mx6cuboxi_defconfig
delete mode 100644 include/configs/mx6cuboxi.h
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index d05a3fa7ccf..19e259af057 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -542,7 +542,6 @@ source "board/freescale/mx6ullevk/Kconfig"
source "board/kosagi/novena/Kconfig"
source "board/liebherr/display5/Kconfig"
source "board/seco/Kconfig"
-source "board/solidrun/mx6cuboxi/Kconfig"
source "board/technexion/pico-imx6ul/Kconfig"
source "board/tqc/tqma6/Kconfig"
source "board/toradex/colibri-imx6ull/Kconfig"
diff --git a/board/solidrun/mx6cuboxi/Kconfig b/board/solidrun/mx6cuboxi/Kconfig
deleted file mode 100644
index 741c1754f81..00000000000
--- a/board/solidrun/mx6cuboxi/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MX6CUBOXI
-
-config SYS_BOARD
- default "mx6cuboxi"
-
-config SYS_VENDOR
- default "solidrun"
-
-config SYS_CONFIG_NAME
- default "mx6cuboxi"
-
-endif
diff --git a/board/solidrun/mx6cuboxi/MAINTAINERS b/board/solidrun/mx6cuboxi/MAINTAINERS
deleted file mode 100644
index 81f82bc9b5e..00000000000
--- a/board/solidrun/mx6cuboxi/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MX6CUBOXI BOARD
-M: Fabio Estevam <fabio.estevam at nxp.com>
-S: Maintained
-F: board/solidrun/mx6cuboxi/
-F: include/configs/mx6cuboxi.h
-F: configs/mx6cuboxi_defconfig
diff --git a/board/solidrun/mx6cuboxi/Makefile b/board/solidrun/mx6cuboxi/Makefile
deleted file mode 100644
index 6e5becbd27b..00000000000
--- a/board/solidrun/mx6cuboxi/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
-#
-# (C) Copyright 2011 Freescale Semiconductor, Inc.
-
-obj-y := mx6cuboxi.o
diff --git a/board/solidrun/mx6cuboxi/README b/board/solidrun/mx6cuboxi/README
deleted file mode 100644
index 5d0a45d9299..00000000000
--- a/board/solidrun/mx6cuboxi/README
+++ /dev/null
@@ -1,21 +0,0 @@
-How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i
------------------------------------------------------------
-
-- Build U-Boot for Hummingboard/Cubox-i:
-
-$ make mrproper
-$ make mx6cuboxi_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot.img.
-
-- Flash the SPL image into the SD card:
-
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
-
-- Flash the u-boot.img image into the SD card:
-
-sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
-
-- Insert the SD card in the board, power it up and U-Boot messages should
-come up.
diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
deleted file mode 100644
index cf63427e52f..00000000000
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ /dev/null
@@ -1,857 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam at freescale.com>
- *
- * Copyright (C) 2013 Jon Nettleton <jon.nettleton at gmail.com>
- *
- * Based on SPL code from Solidrun tree, which is:
- * Author: Tungyi Lin <tungyilin1127 at gmail.com>
- *
- * Derived from EDM_CF_IMX6 code by TechNexion,Inc
- * Ported to SolidRun microSOM by Rabeeh Khoury <rabeeh at solid-run.com>
- */
-
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <asm/arch/mxc_hdmi.h>
-#include <linux/errno.h>
-#include <asm/gpio.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/sata.h>
-#include <asm/mach-imx/video.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
-#include <malloc.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <spl.h>
-#include <usb.h>
-#include <usb/ehci-ci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
- PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
- PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
- PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL_PD (PAD_CTL_PUS_100K_DOWN | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL_CLK ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
-
-#define ETH_PHY_RESET IMX_GPIO_NR(4, 15)
-#define USB_H1_VBUS IMX_GPIO_NR(1, 0)
-
-enum board_type {
- CUBOXI = 0x00,
- HUMMINGBOARD = 0x01,
- HUMMINGBOARD2 = 0x02,
- UNKNOWN = 0x03,
-};
-
-#define MEM_STRIDE 0x4000000
-static u32 get_ram_size_stride_test(u32 *base, u32 maxsize)
-{
- volatile u32 *addr;
- u32 save[64];
- u32 cnt;
- u32 size;
- int i = 0;
-
- /* First save the data */
- for (cnt = 0; cnt < maxsize; cnt += MEM_STRIDE) {
- addr = (volatile u32 *)((u32)base + cnt); /* pointer arith! */
- sync ();
- save[i++] = *addr;
- sync ();
- }
-
- /* First write a signature */
- * (volatile u32 *)base = 0x12345678;
- for (size = MEM_STRIDE; size < maxsize; size += MEM_STRIDE) {
- * (volatile u32 *)((u32)base + size) = size;
- sync ();
- if (* (volatile u32 *)((u32)base) == size) { /* We reached the overlapping address */
- break;
- }
- }
-
- /* Restore the data */
- for (cnt = (maxsize - MEM_STRIDE); i > 0; cnt -= MEM_STRIDE) {
- addr = (volatile u32 *)((u32)base + cnt); /* pointer arith! */
- sync ();
- *addr = save[i--];
- sync ();
- }
-
- return (size);
-}
-
-int dram_init(void)
-{
- u32 max_size = imx_ddr_size();
-
- gd->ram_size = get_ram_size_stride_test((u32 *) CONFIG_SYS_SDRAM_BASE,
- (u32)max_size);
-
- return 0;
-}
-
-static iomux_v3_cfg_t const uart1_pads[] = {
- IOMUX_PADS(PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
- IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usdhc2_pads[] = {
- IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usdhc3_pads[] = {
- IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const board_detect[] = {
- /* These pins are for sensing if it is a CuBox-i or a HummingBoard */
- IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(UART_PAD_CTRL)),
- IOMUX_PADS(PAD_EIM_DA4__GPIO3_IO04 | MUX_PAD_CTRL(UART_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const som_rev_detect[] = {
- /* These pins are for sensing if it is a CuBox-i or a HummingBoard */
- IOMUX_PADS(PAD_CSI0_DAT14__GPIO6_IO00 | MUX_PAD_CTRL(UART_PAD_CTRL)),
- IOMUX_PADS(PAD_CSI0_DAT18__GPIO6_IO04 | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usb_pads[] = {
- IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static void setup_iomux_uart(void)
-{
- SETUP_IOMUX_PADS(uart1_pads);
-}
-
-static struct fsl_esdhc_cfg usdhc_cfg = {
- .esdhc_base = USDHC2_BASE_ADDR,
- .max_bus_width = 4,
-};
-
-static struct fsl_esdhc_cfg emmc_cfg = {
- .esdhc_base = USDHC3_BASE_ADDR,
- .max_bus_width = 8,
-};
-
-int board_mmc_get_env_dev(int devno)
-{
- return devno - 1;
-}
-
-#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC2_BASE_ADDR:
- ret = !gpio_get_value(USDHC2_CD_GPIO);
- break;
- case USDHC3_BASE_ADDR:
- ret = (mmc_get_op_cond(mmc) < 0) ? 0 : 1; /* eMMC/uSDHC3 has no CD GPIO */
- break;
- }
-
- return ret;
-}
-
-static int mmc_init_main(bd_t *bis)
-{
- int ret;
-
- /*
- * Following map is done:
- * (U-Boot device node) (Physical Port)
- * mmc0 Carrier board MicroSD
- * mmc1 SOM eMMC
- */
- SETUP_IOMUX_PADS(usdhc2_pads);
- usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg);
- if (ret)
- return ret;
-
- SETUP_IOMUX_PADS(usdhc3_pads);
- emmc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- return fsl_esdhc_initialize(bis, &emmc_cfg);
-}
-
-static int mmc_init_spl(bd_t *bis)
-{
- struct src *psrc = (struct src *)SRC_BASE_ADDR;
- unsigned reg = readl(&psrc->sbmr1) >> 11;
-
- /*
- * Upon reading BOOT_CFG register the following map is done:
- * Bit 11 and 12 of BOOT_CFG register can determine the current
- * mmc port
- * 0x1 SD2
- * 0x2 SD3
- */
- switch (reg & 0x3) {
- case 0x1:
- SETUP_IOMUX_PADS(usdhc2_pads);
- usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- gd->arch.sdhc_clk = usdhc_cfg.sdhc_clk;
- return fsl_esdhc_initialize(bis, &usdhc_cfg);
- case 0x2:
- SETUP_IOMUX_PADS(usdhc3_pads);
- emmc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- gd->arch.sdhc_clk = emmc_cfg.sdhc_clk;
- return fsl_esdhc_initialize(bis, &emmc_cfg);
- }
-
- return -ENODEV;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- if (IS_ENABLED(CONFIG_SPL_BUILD))
- return mmc_init_spl(bis);
-
- return mmc_init_main(bis);
-}
-
-static iomux_v3_cfg_t const enet_pads[] = {
- IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- /* AR8035 reset */
- IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
- /* AR8035 interrupt */
- IOMUX_PADS(PAD_DI0_PIN2__GPIO4_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* GPIO16 -> AR8035 25MHz */
- IOMUX_PADS(PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
- IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK)),
- IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
- IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
- IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
- IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
- IOMUX_PADS(PAD_ENET_RXD1__GPIO1_IO26 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
-};
-
-static void setup_iomux_enet(void)
-{
- SETUP_IOMUX_PADS(enet_pads);
-
- gpio_direction_output(ETH_PHY_RESET, 0);
- mdelay(10);
- gpio_set_value(ETH_PHY_RESET, 1);
- udelay(100);
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
- if (phydev->drv->config)
- phydev->drv->config(phydev);
-
- return 0;
-}
-
-/* On Cuboxi Ethernet PHY can be located at addresses 0x0 or 0x4 */
-#define ETH_PHY_MASK ((1 << 0x0) | (1 << 0x4))
-
-int board_eth_init(bd_t *bis)
-{
- struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
- struct mii_dev *bus;
- struct phy_device *phydev;
-
- int ret = enable_fec_anatop_clock(0, ENET_25MHZ);
- if (ret)
- return ret;
-
- /* set gpr1[ENET_CLK_SEL] */
- setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
-
- setup_iomux_enet();
-
- bus = fec_get_miibus(IMX_FEC_BASE, -1);
- if (!bus)
- return -EINVAL;
-
- phydev = phy_find_by_mask(bus, ETH_PHY_MASK, PHY_INTERFACE_MODE_RGMII);
- if (!phydev) {
- ret = -EINVAL;
- goto free_bus;
- }
-
- debug("using phy at address %d\n", phydev->addr);
- ret = fec_probe(bis, -1, IMX_FEC_BASE, bus, phydev);
- if (ret)
- goto free_phydev;
-
- return 0;
-
-free_phydev:
- free(phydev);
-free_bus:
- free(bus);
- return ret;
-}
-
-#ifdef CONFIG_VIDEO_IPUV3
-static void do_enable_hdmi(struct display_info_t const *dev)
-{
- imx_enable_hdmi_phy();
-}
-
-struct display_info_t const displays[] = {
- {
- .bus = -1,
- .addr = 0,
- .pixfmt = IPU_PIX_FMT_RGB24,
- .detect = detect_hdmi,
- .enable = do_enable_hdmi,
- .mode = {
- .name = "HDMI",
- /* 1024x768 at 60Hz (VESA)*/
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 15384,
- .left_margin = 160,
- .right_margin = 24,
- .upper_margin = 29,
- .lower_margin = 3,
- .hsync_len = 136,
- .vsync_len = 6,
- .sync = FB_SYNC_EXT,
- .vmode = FB_VMODE_NONINTERLACED
- }
- }
-};
-
-size_t display_count = ARRAY_SIZE(displays);
-
-static int setup_display(void)
-{
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
- int reg;
- int timeout = 100000;
-
- enable_ipu_clock();
- imx_setup_hdmi();
-
- /* set video pll to 455MHz (24MHz * (37+11/12) / 2) */
- setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
-
- reg = readl(&ccm->analog_pll_video);
- reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
- reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(37);
- reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
- reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1);
- writel(reg, &ccm->analog_pll_video);
-
- writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num);
- writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom);
-
- reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
- writel(reg, &ccm->analog_pll_video);
-
- while (timeout--)
- if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
- break;
- if (timeout < 0) {
- printf("Warning: video pll lock timeout!\n");
- return -ETIMEDOUT;
- }
-
- reg = readl(&ccm->analog_pll_video);
- reg |= BM_ANADIG_PLL_VIDEO_ENABLE;
- reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
- writel(reg, &ccm->analog_pll_video);
-
- /* gate ipu1_di0_clk */
- clrbits_le32(&ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);
-
- /* select video_pll clock / 7 for ipu1_di0_clk -> 65MHz pixclock */
- reg = readl(&ccm->chsccdr);
- reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK |
- MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK |
- MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
- reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET) |
- (6 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET) |
- (0 << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
- writel(reg, &ccm->chsccdr);
-
- /* enable ipu1_di0_clk */
- setbits_le32(&ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);
-
- return 0;
-}
-#endif /* CONFIG_VIDEO_IPUV3 */
-
-#ifdef CONFIG_USB_EHCI_MX6
-static void setup_usb(void)
-{
- SETUP_IOMUX_PADS(usb_pads);
-}
-
-int board_ehci_hcd_init(int port)
-{
- if (port == 1)
- gpio_direction_output(USB_H1_VBUS, 1);
-
- return 0;
-}
-#endif
-
-int board_early_init_f(void)
-{
- setup_iomux_uart();
-
-#ifdef CONFIG_CMD_SATA
- setup_sata();
-#endif
-
-#ifdef CONFIG_USB_EHCI_MX6
- setup_usb();
-#endif
- return 0;
-}
-
-int board_init(void)
-{
- int ret = 0;
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifdef CONFIG_VIDEO_IPUV3
- ret = setup_display();
-#endif
-
- return ret;
-}
-
-static enum board_type board_type(void)
-{
- int val1, val2, val3;
-
- SETUP_IOMUX_PADS(board_detect);
-
- /*
- * Machine selection -
- * Machine val1, val2, val3
- * ----------------------------
- * HB2 x x 0
- * HB rev 3.x x 0 x
- * CBi 0 1 x
- * HB 1 1 x
- */
-
- gpio_direction_input(IMX_GPIO_NR(2, 8));
- val3 = gpio_get_value(IMX_GPIO_NR(2, 8));
-
- if (val3 == 0)
- return HUMMINGBOARD2;
-
- gpio_direction_input(IMX_GPIO_NR(3, 4));
- val2 = gpio_get_value(IMX_GPIO_NR(3, 4));
-
- if (val2 == 0)
- return HUMMINGBOARD;
-
- gpio_direction_input(IMX_GPIO_NR(4, 9));
- val1 = gpio_get_value(IMX_GPIO_NR(4, 9));
-
- if (val1 == 0) {
- return CUBOXI;
- } else {
- return HUMMINGBOARD;
- }
-}
-
-static bool is_rev_15_som(void)
-{
- int val1, val2;
- SETUP_IOMUX_PADS(som_rev_detect);
-
- val1 = gpio_get_value(IMX_GPIO_NR(6, 0));
- val2 = gpio_get_value(IMX_GPIO_NR(6, 4));
-
- if (val1 == 1 && val2 == 0)
- return true;
-
- return false;
-}
-
-static bool has_emmc(void)
-{
- struct mmc *mmc;
- mmc = find_mmc_device(1);
- if (!mmc)
- return 0;
- return (mmc_get_op_cond(mmc) < 0) ? 0 : 1;
-}
-
-int checkboard(void)
-{
- switch (board_type()) {
- case CUBOXI:
- puts("Board: MX6 Cubox-i");
- break;
- case HUMMINGBOARD:
- puts("Board: MX6 HummingBoard");
- break;
- case HUMMINGBOARD2:
- puts("Board: MX6 HummingBoard2");
- break;
- case UNKNOWN:
- default:
- puts("Board: Unknown\n");
- goto out;
- }
-
- if (is_rev_15_som())
- puts(" (som rev 1.5)\n");
- else
- puts("\n");
-
-out:
- return 0;
-}
-
-int board_late_init(void)
-{
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- switch (board_type()) {
- case CUBOXI:
- env_set("board_name", "CUBOXI");
- break;
- case HUMMINGBOARD:
- env_set("board_name", "HUMMINGBOARD");
- break;
- case HUMMINGBOARD2:
- env_set("board_name", "HUMMINGBOARD2");
- break;
- case UNKNOWN:
- default:
- env_set("board_name", "CUBOXI");
- }
-
- if (is_mx6dq())
- env_set("board_rev", "MX6Q");
- else
- env_set("board_rev", "MX6DL");
-
- if (is_rev_15_som())
- env_set("som_rev", "V15");
-
- if (has_emmc())
- env_set("has_emmc", "yes");
-
-#endif
-
- return 0;
-}
-
-#ifdef CONFIG_SPL_BUILD
-#include <asm/arch/mx6-ddr.h>
-static const struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = {
- .dram_sdclk_0 = 0x00020030,
- .dram_sdclk_1 = 0x00020030,
- .dram_cas = 0x00020030,
- .dram_ras = 0x00020030,
- .dram_reset = 0x000c0030,
- .dram_sdcke0 = 0x00003000,
- .dram_sdcke1 = 0x00003000,
- .dram_sdba2 = 0x00000000,
- .dram_sdodt0 = 0x00003030,
- .dram_sdodt1 = 0x00003030,
- .dram_sdqs0 = 0x00000030,
- .dram_sdqs1 = 0x00000030,
- .dram_sdqs2 = 0x00000030,
- .dram_sdqs3 = 0x00000030,
- .dram_sdqs4 = 0x00000030,
- .dram_sdqs5 = 0x00000030,
- .dram_sdqs6 = 0x00000030,
- .dram_sdqs7 = 0x00000030,
- .dram_dqm0 = 0x00020030,
- .dram_dqm1 = 0x00020030,
- .dram_dqm2 = 0x00020030,
- .dram_dqm3 = 0x00020030,
- .dram_dqm4 = 0x00020030,
- .dram_dqm5 = 0x00020030,
- .dram_dqm6 = 0x00020030,
- .dram_dqm7 = 0x00020030,
-};
-
-static const struct mx6sdl_iomux_ddr_regs mx6dl_ddr_ioregs = {
- .dram_sdclk_0 = 0x00000028,
- .dram_sdclk_1 = 0x00000028,
- .dram_cas = 0x00000028,
- .dram_ras = 0x00000028,
- .dram_reset = 0x000c0028,
- .dram_sdcke0 = 0x00003000,
- .dram_sdcke1 = 0x00003000,
- .dram_sdba2 = 0x00000000,
- .dram_sdodt0 = 0x00003030,
- .dram_sdodt1 = 0x00003030,
- .dram_sdqs0 = 0x00000028,
- .dram_sdqs1 = 0x00000028,
- .dram_sdqs2 = 0x00000028,
- .dram_sdqs3 = 0x00000028,
- .dram_sdqs4 = 0x00000028,
- .dram_sdqs5 = 0x00000028,
- .dram_sdqs6 = 0x00000028,
- .dram_sdqs7 = 0x00000028,
- .dram_dqm0 = 0x00000028,
- .dram_dqm1 = 0x00000028,
- .dram_dqm2 = 0x00000028,
- .dram_dqm3 = 0x00000028,
- .dram_dqm4 = 0x00000028,
- .dram_dqm5 = 0x00000028,
- .dram_dqm6 = 0x00000028,
- .dram_dqm7 = 0x00000028,
-};
-
-static const struct mx6dq_iomux_grp_regs mx6q_grp_ioregs = {
- .grp_ddr_type = 0x000C0000,
- .grp_ddrmode_ctl = 0x00020000,
- .grp_ddrpke = 0x00000000,
- .grp_addds = 0x00000030,
- .grp_ctlds = 0x00000030,
- .grp_ddrmode = 0x00020000,
- .grp_b0ds = 0x00000030,
- .grp_b1ds = 0x00000030,
- .grp_b2ds = 0x00000030,
- .grp_b3ds = 0x00000030,
- .grp_b4ds = 0x00000030,
- .grp_b5ds = 0x00000030,
- .grp_b6ds = 0x00000030,
- .grp_b7ds = 0x00000030,
-};
-
-static const struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
- .grp_ddr_type = 0x000c0000,
- .grp_ddrmode_ctl = 0x00020000,
- .grp_ddrpke = 0x00000000,
- .grp_addds = 0x00000028,
- .grp_ctlds = 0x00000028,
- .grp_ddrmode = 0x00020000,
- .grp_b0ds = 0x00000028,
- .grp_b1ds = 0x00000028,
- .grp_b2ds = 0x00000028,
- .grp_b3ds = 0x00000028,
- .grp_b4ds = 0x00000028,
- .grp_b5ds = 0x00000028,
- .grp_b6ds = 0x00000028,
- .grp_b7ds = 0x00000028,
-};
-
-/* microSOM with Dual processor and 1GB memory */
-static const struct mx6_mmdc_calibration mx6q_1g_mmcd_calib = {
- .p0_mpwldectrl0 = 0x00000000,
- .p0_mpwldectrl1 = 0x00000000,
- .p1_mpwldectrl0 = 0x00000000,
- .p1_mpwldectrl1 = 0x00000000,
- .p0_mpdgctrl0 = 0x0314031c,
- .p0_mpdgctrl1 = 0x023e0304,
- .p1_mpdgctrl0 = 0x03240330,
- .p1_mpdgctrl1 = 0x03180260,
- .p0_mprddlctl = 0x3630323c,
- .p1_mprddlctl = 0x3436283a,
- .p0_mpwrdlctl = 0x36344038,
- .p1_mpwrdlctl = 0x422a423c,
-};
-
-/* microSOM with Quad processor and 2GB memory */
-static const struct mx6_mmdc_calibration mx6q_2g_mmcd_calib = {
- .p0_mpwldectrl0 = 0x00000000,
- .p0_mpwldectrl1 = 0x00000000,
- .p1_mpwldectrl0 = 0x00000000,
- .p1_mpwldectrl1 = 0x00000000,
- .p0_mpdgctrl0 = 0x0314031c,
- .p0_mpdgctrl1 = 0x023e0304,
- .p1_mpdgctrl0 = 0x03240330,
- .p1_mpdgctrl1 = 0x03180260,
- .p0_mprddlctl = 0x3630323c,
- .p1_mprddlctl = 0x3436283a,
- .p0_mpwrdlctl = 0x36344038,
- .p1_mpwrdlctl = 0x422a423c,
-};
-
-/* microSOM with Solo processor and 512MB memory */
-static const struct mx6_mmdc_calibration mx6dl_512m_mmcd_calib = {
- .p0_mpwldectrl0 = 0x0045004D,
- .p0_mpwldectrl1 = 0x003A0047,
- .p0_mpdgctrl0 = 0x023C0224,
- .p0_mpdgctrl1 = 0x02000220,
- .p0_mprddlctl = 0x44444846,
- .p0_mpwrdlctl = 0x32343032,
-};
-
-/* microSOM with Dual lite processor and 1GB memory */
-static const struct mx6_mmdc_calibration mx6dl_1g_mmcd_calib = {
- .p0_mpwldectrl0 = 0x0045004D,
- .p0_mpwldectrl1 = 0x003A0047,
- .p1_mpwldectrl0 = 0x001F001F,
- .p1_mpwldectrl1 = 0x00210035,
- .p0_mpdgctrl0 = 0x023C0224,
- .p0_mpdgctrl1 = 0x02000220,
- .p1_mpdgctrl0 = 0x02200220,
- .p1_mpdgctrl1 = 0x02040208,
- .p0_mprddlctl = 0x44444846,
- .p1_mprddlctl = 0x4042463C,
- .p0_mpwrdlctl = 0x32343032,
- .p1_mpwrdlctl = 0x36363430,
-};
-
-static struct mx6_ddr3_cfg mem_ddr_2g = {
- .mem_speed = 1600,
- .density = 2,
- .width = 16,
- .banks = 8,
- .rowaddr = 14,
- .coladdr = 10,
- .pagesz = 2,
- .trcd = 1375,
- .trcmin = 4875,
- .trasmin = 3500,
-};
-
-static struct mx6_ddr3_cfg mem_ddr_4g = {
- .mem_speed = 1600,
- .density = 4,
- .width = 16,
- .banks = 8,
- .rowaddr = 16,
- .coladdr = 10,
- .pagesz = 2,
- .trcd = 1375,
- .trcmin = 4875,
- .trasmin = 3500,
-};
-
-static void ccgr_init(void)
-{
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- writel(0x00C03F3F, &ccm->CCGR0);
- writel(0x0030FC03, &ccm->CCGR1);
- writel(0x0FFFC000, &ccm->CCGR2);
- writel(0x3FF00000, &ccm->CCGR3);
- writel(0x00FFF300, &ccm->CCGR4);
- writel(0x0F0000C3, &ccm->CCGR5);
- writel(0x000003FF, &ccm->CCGR6);
-}
-
-static void spl_dram_init(int width)
-{
- struct mx6_ddr_sysinfo sysinfo = {
- /* width of data bus: 0=16, 1=32, 2=64 */
- .dsize = width / 32,
- /* config for full 4GB range so that get_mem_size() works */
- .cs_density = 32, /* 32Gb per CS */
- .ncs = 1, /* single chip select */
- .cs1_mirror = 0,
- .rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */
- .rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */
- .walat = 1, /* Write additional latency */
- .ralat = 5, /* Read additional latency */
- .mif3_mode = 3, /* Command prediction working mode */
- .bi_on = 1, /* Bank interleaving enabled */
- .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
- .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
- .ddr_type = DDR_TYPE_DDR3,
- .refsel = 1, /* Refresh cycles at 32KHz */
- .refr = 7, /* 8 refresh commands per refresh cycle */
- };
-
- if (is_mx6dq())
- mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs);
- else
- mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs);
-
- if (is_cpu_type(MXC_CPU_MX6D))
- mx6_dram_cfg(&sysinfo, &mx6q_1g_mmcd_calib, &mem_ddr_2g);
- else if (is_cpu_type(MXC_CPU_MX6Q))
- mx6_dram_cfg(&sysinfo, &mx6q_2g_mmcd_calib, &mem_ddr_4g);
- else if (is_cpu_type(MXC_CPU_MX6DL))
- mx6_dram_cfg(&sysinfo, &mx6dl_1g_mmcd_calib, &mem_ddr_2g);
- else if (is_cpu_type(MXC_CPU_MX6SOLO))
- mx6_dram_cfg(&sysinfo, &mx6dl_512m_mmcd_calib, &mem_ddr_2g);
-}
-
-void board_init_f(ulong dummy)
-{
- /* setup AIPS and disable watchdog */
- arch_cpu_init();
-
- ccgr_init();
- gpr_init();
-
- /* iomux and setup of i2c */
- board_early_init_f();
-
- /* setup GP timer */
- timer_init();
-
- /* UART clocks enabled and gd valid - init serial console */
- preloader_console_init();
-
- /* DDR initialization */
- if (is_cpu_type(MXC_CPU_MX6SOLO))
- spl_dram_init(32);
- else
- spl_dram_init(64);
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- /* load/boot image from boot device */
- board_init_r(NULL, 0);
-}
-#endif
diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig
deleted file mode 100644
index 6e73a9752c3..00000000000
--- a/configs/mx6cuboxi_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6CUBOXI=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_CMD_HDMIDETECT=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
-CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_EXT_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SATA=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-# CONFIG_SPL_PARTITION_UUIDS is not set
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_DM=y
-CONFIG_DWC_AHSATA=y
-CONFIG_FSL_ESDHC=y
-CONFIG_PHYLIB=y
-CONFIG_MII=y
-CONFIG_DM_THERMAL=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_KEYBOARD=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
deleted file mode 100644
index a62e14f7c61..00000000000
--- a/include/configs/mx6cuboxi.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * Configuration settings for the SolidRun mx6 based boards
- */
-#ifndef __MX6CUBOXI_CONFIG_H
-#define __MX6CUBOXI_CONFIG_H
-
-#include "mx6_common.h"
-
-#include "imx6_spl.h"
-
-#define CONFIG_IMX_THERMAL
-
-#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
-#define CONFIG_MXC_UART
-
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
-
-/* SATA Configuration */
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE 1
-#define CONFIG_DWC_AHSATA_PORT_ID 0
-#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#endif
-
-/* Ethernet Configuration */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_FEC_MXC_PHYADDR 0
-#define CONFIG_PHY_ATHEROS
-
-/* Framebuffer */
-#define CONFIG_VIDEO_IPUV3
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IMX_HDMI
-#define CONFIG_IMX_VIDEO_SKIP
-
-/* USB */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_PREBOOT \
- "if hdmidet; then " \
- "usb start; " \
- "setenv stdin serial,usbkbd; "\
- "setenv stdout serial,vga; " \
- "setenv stderr serial,vga; " \
- "else " \
- "setenv stdin serial; " \
- "setenv stdout serial; " \
- "setenv stderr serial; " \
- "fi;"
-
-/* Command definition */
-
-#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONSOLE_DEV "ttymxc0"
-#define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "som_rev=undefined\0" \
- "has_emmc=undefined\0" \
- "fdtfile=undefined\0" \
- "fdt_addr_r=0x18000000\0" \
- "fdt_addr=0x18000000\0" \
- "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
- "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
- "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
- "ramdisk_addr_r=0x13000000\0" \
- "ramdiskaddr=0x13000000\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0" \
- "ip_dyn=yes\0" \
- "console=" CONSOLE_DEV ",115200\0" \
- "bootm_size=0x10000000\0" \
- "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
- "finduuid=part uuid mmc 0:1 uuid\0" \
- "update_sd_firmware=" \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "if mmc dev ${mmcdev}; then " \
- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
- "setexpr fw_sz ${filesize} / 0x200; " \
- "setexpr fw_sz ${fw_sz} + 1; " \
- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
- "fi; " \
- "fi\0" \
- "findfdt="\
- "if test ${board_rev} = MX6Q; then " \
- "setenv fdtprefix imx6q; fi; " \
- "if test ${board_rev} = MX6DL; then " \
- "setenv fdtprefix imx6dl; fi; " \
- "if test ${som_rev} = V15; then " \
- "setenv fdtsuffix -som-v15; fi; " \
- "if test ${has_emmc} = yes; then " \
- "setenv emmcsuffix -emmc; fi; " \
- "if test ${board_name} = HUMMINGBOARD2 ; then " \
- "setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \
- "if test ${board_name} = HUMMINGBOARD ; then " \
- "setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \
- "if test ${board_name} = CUBOXI ; then " \
- "setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \
- "if test ${fdtfile} = undefined; then " \
- "echo WARNING: Could not determine dtb to use; fi; \0" \
- BOOTENV
-
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(SATA, sata, 0) \
- func(USB, usb, 0) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
-
-#include <config_distro_bootcmd.h>
-
-#else
-#define CONFIG_EXTRA_ENV_SETTINGS
-#endif /* CONFIG_SPL_BUILD */
-
-/* Physical Memory Map */
-#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* Environment organization */
-#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_OFFSET (SZ_1M - CONFIG_ENV_SIZE)
-
-#endif /* __MX6CUBOXI_CONFIG_H */
--
2.19.1.1215.g8438c0b245-goog
More information about the U-Boot
mailing list