[U-Boot] [PATCH 87/93] arm: Remove db-mv784mp-gp board
Simon Glass
sjg at chromium.org
Mon Nov 19 15:54:07 UTC 2018
This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
board/Marvell/db-mv784mp-gp/MAINTAINERS | 6 -
board/Marvell/db-mv784mp-gp/Makefile | 5 -
board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c | 117 --------------------
configs/db-mv784mp-gp_defconfig | 64 -----------
include/configs/db-mv784mp-gp.h | 99 -----------------
5 files changed, 291 deletions(-)
delete mode 100644 board/Marvell/db-mv784mp-gp/MAINTAINERS
delete mode 100644 board/Marvell/db-mv784mp-gp/Makefile
delete mode 100644 board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c
delete mode 100644 configs/db-mv784mp-gp_defconfig
delete mode 100644 include/configs/db-mv784mp-gp.h
diff --git a/board/Marvell/db-mv784mp-gp/MAINTAINERS b/board/Marvell/db-mv784mp-gp/MAINTAINERS
deleted file mode 100644
index a095f898d40..00000000000
--- a/board/Marvell/db-mv784mp-gp/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-DB_MV784MP_GP BOARD
-M: Stefan Roese <sr at denx.de>
-S: Maintained
-F: board/Marvell/db-mv784mp-gp/
-F: include/configs/db-mv784mp-gp.h
-F: configs/db-mv784mp-gp_defconfig
diff --git a/board/Marvell/db-mv784mp-gp/Makefile b/board/Marvell/db-mv784mp-gp/Makefile
deleted file mode 100644
index 1bd2388afb3..00000000000
--- a/board/Marvell/db-mv784mp-gp/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2014 Stefan Roese <sr at denx.de>
-
-obj-y := db-mv784mp-gp.o
diff --git a/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c b/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c
deleted file mode 100644
index 604e8c1670b..00000000000
--- a/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2014 Stefan Roese <sr at denx.de>
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/soc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define ETH_PHY_CTRL_REG 0
-#define ETH_PHY_CTRL_POWER_DOWN_BIT 11
-#define ETH_PHY_CTRL_POWER_DOWN_MASK (1 << ETH_PHY_CTRL_POWER_DOWN_BIT)
-
-/*
- * Those values and defines are taken from the Marvell U-Boot version
- * "u-boot-2011.12-2014_T1.0" for the board rd78460gp aka
- * "RD-AXP-GP rev 1.0".
- *
- * GPPs
- * MPP# NAME IN/OUT
- * ----------------------------------------------
- * 21 SW_Reset_ OUT
- * 25 Phy_Int# IN
- * 28 SDI_WP IN
- * 29 SDI_Status IN
- * 54-61 On GPP Connector ?
- * 62 Switch Interrupt IN
- * 63-65 Reserved from SW Board ?
- * 66 SW_BRD connected IN
- */
-#define RD_78460_GP_GPP_OUT_ENA_LOW (~(BIT(21) | BIT(20)))
-#define RD_78460_GP_GPP_OUT_ENA_MID (~(BIT(26) | BIT(27)))
-#define RD_78460_GP_GPP_OUT_ENA_HIGH (~(0x0))
-
-#define RD_78460_GP_GPP_OUT_VAL_LOW (BIT(21) | BIT(20))
-#define RD_78460_GP_GPP_OUT_VAL_MID (BIT(26) | BIT(27))
-#define RD_78460_GP_GPP_OUT_VAL_HIGH 0x0
-
-int board_early_init_f(void)
-{
- /* Configure MPP */
- writel(0x00000000, MVEBU_MPP_BASE + 0x00);
- writel(0x00000000, MVEBU_MPP_BASE + 0x04);
- writel(0x33000000, MVEBU_MPP_BASE + 0x08);
- writel(0x11000000, MVEBU_MPP_BASE + 0x0c);
- writel(0x11111111, MVEBU_MPP_BASE + 0x10);
- writel(0x00221100, MVEBU_MPP_BASE + 0x14);
- writel(0x00000003, MVEBU_MPP_BASE + 0x18);
- writel(0x00000000, MVEBU_MPP_BASE + 0x1c);
- writel(0x00000000, MVEBU_MPP_BASE + 0x20);
-
- /* Configure GPIO */
- writel(RD_78460_GP_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
- writel(RD_78460_GP_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
- writel(RD_78460_GP_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
- writel(RD_78460_GP_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
- writel(RD_78460_GP_GPP_OUT_VAL_HIGH, MVEBU_GPIO2_BASE + 0x00);
- writel(RD_78460_GP_GPP_OUT_ENA_HIGH, MVEBU_GPIO2_BASE + 0x04);
-
- return 0;
-}
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
-
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Board: Marvell DB-MV784MP-GP\n");
-
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- cpu_eth_init(bis); /* Built in controller(s) come first */
- return pci_eth_init(bis);
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
- u16 reg;
-
- /* Enable QSGMII AN */
- /* Set page to 4 */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x16, 4);
- /* Enable AN */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x0, 0x1140);
- /* Set page to 0 */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x16, 0);
-
- /* Phy C_ANEG */
- reg = phy_read(phydev, MDIO_DEVAD_NONE, 0x4);
- reg |= 0x1E0;
- phy_write(phydev, MDIO_DEVAD_NONE, 0x4, reg);
-
- /* Soft-Reset */
- phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000);
- phy_write(phydev, MDIO_DEVAD_NONE, 0, 0x9140);
-
- /* Power up the phy */
- reg = phy_read(phydev, MDIO_DEVAD_NONE, ETH_PHY_CTRL_REG);
- reg &= ~(ETH_PHY_CTRL_POWER_DOWN_MASK);
- phy_write(phydev, MDIO_DEVAD_NONE, ETH_PHY_CTRL_REG, reg);
-
- printf("88E1545 Initialized\n");
- return 0;
-}
diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig
deleted file mode 100644
index 3f140986b69..00000000000
--- a/configs/db-mv784mp-gp_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_SYS_TEXT_BASE=0x00800000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_TARGET_DB_MV784MP_GP=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xd0012000
-CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_DEBUG_UART=y
-CONFIG_NR_DRAM_BANKS=2
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_BOOTDELAY=3
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_SPI_LOAD=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_PARTITION_UUIDS is not set
-# CONFIG_SPL_PARTITION_UUIDS is not set
-CONFIG_DEFAULT_DEVICE_TREE="armada-xp-gp"
-CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_SATA_MV=y
-# CONFIG_MMC is not set
-CONFIG_NAND=y
-CONFIG_NAND_PXA3XX=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_GIGE=y
-CONFIG_MVNETA=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_SYS_NS16550=y
-CONFIG_KIRKWOOD_SPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
deleted file mode 100644
index 8ad007cc491..00000000000
--- a/include/configs/db-mv784mp-gp.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2014-2015 Stefan Roese <sr at denx.de>
- */
-
-#ifndef _CONFIG_DB_MV7846MP_GP_H
-#define _CONFIG_DB_MV7846MP_GP_H
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_DB_784MP_GP /* Board target name for DDR training */
-
-/*
- * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
- * for DDR ECC byte filling in the SPL before loading the main
- * U-Boot into it.
- */
-#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MVTWSI
-#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
-#define CONFIG_SYS_I2C_SLAVE 0x0
-#define CONFIG_SYS_I2C_SPEED 100000
-
-/* USB/EHCI configuration */
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED 1000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
-
-/* Environment in SPI NOR flash */
-#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
-#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
-
-#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-
-/* SATA support */
-#define CONFIG_SYS_SATA_MAX_DEVICE 2
-#define CONFIG_LBA48
-
-/* PCIe support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
-/* NAND */
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#include "mv-common.h"
-
-/*
- * Memory layout while starting into the bin_hdr via the
- * BootROM:
- *
- * 0x4000.4000 - 0x4003.4000 headers space (192KiB)
- * 0x4000.4030 bin_hdr start address
- * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
- * 0x4007.fffc BootROM stack top
- *
- * The address space between 0x4007.fffc and 0x400f.fff is not locked in
- * L2 cache thus cannot be used.
- */
-
-/* SPL */
-/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40004030
-#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
-
-#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
-#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MALLOC_SIMPLE
-#endif
-
-#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
-#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
-
-/* SPL related SPI defines */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
-#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
-
-/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
-#define CONFIG_SPD_EEPROM 0x4e
-#define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */
-
-#endif /* _CONFIG_DB_MV7846MP_GP_H */
--
2.19.1.1215.g8438c0b245-goog
More information about the U-Boot
mailing list