[U-Boot] [PATCH 89/93] arm: Remove socfpga_vining_fpga board
Simon Glass
sjg at chromium.org
Mon Nov 19 15:54:09 UTC 2018
This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
configs/socfpga_vining_fpga_defconfig | 94 --------------
include/configs/socfpga_vining_fpga.h | 180 --------------------------
2 files changed, 274 deletions(-)
delete mode 100644 configs/socfpga_vining_fpga_defconfig
delete mode 100644 include/configs/socfpga_vining_fpga.h
diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig
deleted file mode 100644
index 6fcf8c66f8a..00000000000
--- a/configs/socfpga_vining_fpga_defconfig
+++ /dev/null
@@ -1,94 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SOCFPGA=y
-CONFIG_SYS_TEXT_BASE=0x01000040
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_TARGET_SOCFPGA_SAMTEC_VINING_FPGA=y
-CONFIG_SPL=y
-CONFIG_SPL_STACK_R_ADDR=0x00800000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_BOOTDELAY=5
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200"
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
-CONFIG_MISC_INIT_R=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_DFU=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff705000.spi.0:1m(u-boot),64k(env1),64k(env2),256k(samtec1),256k(samtec2),-(rcvrfs);"
-CONFIG_CMD_UBI=y
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_vining_fpga"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_DFU_SF=y
-CONFIG_FPGA_SOCFPGA=y
-CONFIG_DM_GPIO=y
-CONFIG_DWAPB_GPIO=y
-CONFIG_LED_STATUS=y
-CONFIG_LED_STATUS_GPIO=y
-CONFIG_LED_STATUS0=y
-CONFIG_LED_STATUS_BIT=48
-CONFIG_LED_STATUS1=y
-CONFIG_LED_STATUS_BIT1=53
-CONFIG_LED_STATUS2=y
-CONFIG_LED_STATUS_BIT2=54
-CONFIG_LED_STATUS3=y
-CONFIG_LED_STATUS_BIT3=65
-CONFIG_LED_STATUS_CMD=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_DW=y
-CONFIG_MTD_DEVICE=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_DM_ETH=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_MII=y
-CONFIG_DM_RESET=y
-CONFIG_SPI=y
-CONFIG_CADENCE_QSPI=y
-CONFIG_DESIGNWARE_SPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="samtec"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USE_TINY_PRINTF=y
diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h
deleted file mode 100644
index 5517ed722d4..00000000000
--- a/include/configs/socfpga_vining_fpga.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2015 Marek Vasut <marex at denx.de>
- */
-#ifndef __CONFIG_SAMTEC_VINING_FPGA_H__
-#define __CONFIG_SAMTEC_VINING_FPGA_H__
-
-#include <asm/arch/base_addr_ac5.h>
-
-/* Memory configurations */
-#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on VINING_FPGA */
-
-/* Booting Linux */
-#define CONFIG_BOOTFILE "openwrt-socfpga-socfpga_cyclone5_vining_fpga-fit-uImage.itb"
-#define CONFIG_BOOTCOMMAND "run selboot"
-#define CONFIG_LOADADDR 0x01000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/* I2C EEPROM */
-#ifdef CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_BUS 0
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
-#endif
-
-/*
- * Status LEDs:
- * 0 ... Top Green
- * 1 ... Top Red
- * 2 ... Bottom Green
- * 3 ... Bottom Red
- */
-
-/* Ethernet on SoC (EMAC) */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_BOOTP_SEND_HOSTNAME
-/* PHY */
-#endif
-
-/* Extra Environment */
-#define CONFIG_HOSTNAME "socfpga_vining_fpga"
-
-/*
- * Active LOW GPIO buttons:
- * A: GPIO 77 ... the button between USB B and ethernet
- * B: GPIO 78 ... the button between USB A ports
- *
- * The logic:
- * if button B is not pressed, boot normal Linux system immediatelly
- * if button B is pressed, wait $bootdelay and boot recovery system
- */
-#define CONFIG_PREBOOT \
- "setenv hostname vining-${unit_serial} ; " \
- "setenv PS1 \"${unit_ident} (${unit_serial}) => \" ; " \
- "if gpio input 78 ; then " \
- "setenv bootdelay 10 ; " \
- "setenv boottype rcvr ; " \
- "else " \
- "setenv bootdelay 5 ; " \
- "setenv boottype norm ; " \
- "fi"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "verify=n\0" \
- "consdev=ttyS0\0" \
- "baudrate=115200\0" \
- "bootscript=boot.scr\0" \
- "ubimtdnr=5\0" \
- "ubimtd=rootfs\0" \
- "ubipart=ubi0:rootfs\0" \
- "ubisfcs=1\0" /* Default is flash at CS#1 */ \
- "netdev=eth0\0" \
- "hostname=vining_fpga\0" \
- "kernel_addr_r=0x10000000\0" \
- "mtdparts_0=ff705000.spi.0:" \
- "1m(u-boot)," \
- "64k(env1)," \
- "64k(env2)," \
- "256k(samtec1)," \
- "256k(samtec2)," \
- "-(rcvrfs)\0" /* Recovery */ \
- "mtdparts_1=ff705000.spi.1:" \
- "32m(rootfs)," \
- "-(userfs)\0" \
- "update_filename=u-boot-with-spl-dtb.sfp\0" \
- "update_qspi_offset=0x0\0" \
- "update_qspi=" /* Update the QSPI firmware */ \
- "if sf probe ; then " \
- "if tftp ${update_filename} ; then " \
- "sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \
- "fi ; " \
- "fi\0" \
- "fpga_filename=output_file.rbf\0" \
- "load_fpga=" /* Load FPGA bitstream */ \
- "if tftp ${fpga_filename} ; then " \
- "fpga load 0 $loadaddr $filesize ; " \
- "bridge enable ; " \
- "fi\0" \
- "addcons=" \
- "setenv bootargs ${bootargs} " \
- "console=${consdev},${baudrate}\0" \
- "addip=" \
- "setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off\0" \
- "addmisc=" \
- "setenv bootargs ${bootargs} ${miscargs}\0" \
- "addmtd=" \
- "setenv mtdparts \"${mtdparts_0};${mtdparts_1}\" ; " \
- "setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \
- "addargs=run addcons addmtd addmisc\0" \
- "ubiload=" \
- "ubi part ${ubimtd} ; ubifsmount ${ubipart} ; " \
- "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
- "netload=" \
- "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
- "miscargs=nohlt panic=1\0" \
- "ubiargs=" \
- "setenv bootargs ubi.mtd=${ubimtdnr} " \
- "root=${ubipart} rootfstype=ubifs\0" \
- "nfsargs=" \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
- "ubi_sfsel=" \
- "if test \"${boottype}\" = \"rcvr\" ; then " \
- "setenv ubisfcs 0 ; " \
- "setenv ubimtd rcvrfs ; " \
- "setenv ubimtdnr 5 ; " \
- "setenv mtdparts mtdparts=${mtdparts_0} ; " \
- "setenv mtdids nor0=ff705000.spi.0 ; " \
- "setenv ubipart ubi0:rootfs ; " \
- "else " \
- "setenv ubisfcs 1 ; " \
- "setenv ubimtd rootfs ; " \
- "setenv ubimtdnr 6 ; " \
- "setenv mtdparts mtdparts=${mtdparts_1} ; " \
- "setenv mtdids nor0=ff705000.spi.1 ; " \
- "setenv ubipart ubi0:rootfs ; " \
- "fi ; " \
- "sf probe 0:${ubisfcs}\0" \
- "ubi_ubi=" \
- "run ubi_sfsel ubiload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "ubi_nfs=" \
- "run ubiload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_ubi=" \
- "run netload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_nfs=" \
- "run netload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "selboot=" /* Select from where to boot. */ \
- "if test \"${bootmode}\" = \"qspi\" ; then " \
- "led all off ; " \
- "if test \"${boottype}\" = \"rcvr\" ; then " \
- "echo \"Booting recovery system\" ; " \
- "led 3 on ; " /* Bottom RED */ \
- "fi ; " \
- "led 1 on ; " /* Top RED */ \
- "run ubi_ubi ; " \
- "else echo \"Unsupported boot mode: \"${bootmode} ; " \
- "fi\0" \
-
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-#define CONFIG_ENV_OFFSET 0x100000
-#define CONFIG_ENV_OFFSET_REDUND \
- (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
-
-/* Support changing the prompt string */
-#define CONFIG_CMDLINE_PS_SUPPORT
-
-/* The rest of the configuration is shared */
-#include <configs/socfpga_common.h>
-
-#endif /* __CONFIG_SAMTEC_VINING_FPGA_H__ */
--
2.19.1.1215.g8438c0b245-goog
More information about the U-Boot
mailing list