[U-Boot] [PATCH v14 3/4] efi: Create a function to set up for running EFI code

Heinrich Schuchardt xypron.glpk at gmx.de
Mon Nov 19 19:34:07 UTC 2018


On 11/15/18 12:11 AM, Simon Glass wrote:
> There is still duplicated code in efi_loader for tests and normal
> operation.
> 
> Add a new bootefi_run_prepare() function which holds common code used to
> set up U-Boot to run EFI code. Make use of this from the existing
> bootefi_test_prepare() function, as well as do_bootefi_exec().
> 
> Also shorten a few variable names.
> 
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
> 
> Changes in v14:
> - Go back to the horrible long variable names
> 
> Changes in v13: None
> Changes in v12: None
> Changes in v11: None
> Changes in v9: None
> Changes in v7: None
> Changes in v5:
> - Drop call to efi_init_obj_list() which is now done in do_bootefi()
> - Introduce load_options_path to specifyc U-Boot env var for load_options_path
> 
> Changes in v4:
> - Rebase to master
> 
> Changes in v3:
> - Add patch to create a function to set up for running EFI code
> 
>  cmd/bootefi.c | 63 ++++++++++++++++++++++++++++++---------------------
>  1 file changed, 37 insertions(+), 26 deletions(-)
> 
> diff --git a/cmd/bootefi.c b/cmd/bootefi.c
> index b633e956c23..ab7ada9f2d6 100644
> --- a/cmd/bootefi.c
> +++ b/cmd/bootefi.c
> @@ -325,6 +325,31 @@ static efi_status_t efi_install_fdt(ulong fdt_addr)
>  	return ret;
>  }
>  
> +static efi_status_t bootefi_run_prepare(const char *load_options_path,
> +		struct efi_device_path *device_path,
> +		struct efi_device_path *image_path,
> +		struct efi_loaded_image_obj **image_objp,
> +		struct efi_loaded_image **loaded_image_infop)
> +{
> +	efi_status_t ret;
> +
> +	ret = efi_setup_loaded_image(device_path, image_path, image_objp,
> +				     loaded_image_infop);
> +	if (ret != EFI_SUCCESS)
> +		return ret;
> +
> +	/*
> +	 * gd lives in a fixed register which may get clobbered while we execute
> +	 * the payload. So save it here and restore it on every callback entry
> +	 */
> +	efi_save_gd();
> +
> +	/* Transfer environment variable as load options */
> +	set_load_options(*loaded_image_infop, load_options_path);
> +
> +	return 0;
> +}
> +
>  /**
>   * do_bootefi_exec() - execute EFI binary
>   *
> @@ -374,13 +399,11 @@ static efi_status_t do_bootefi_exec(void *efi,
>  		assert(device_path && image_path);
>  	}
>  
> -	ret = efi_setup_loaded_image(device_path, image_path, &image_obj,
> -				     &loaded_image_info);
> -	if (ret != EFI_SUCCESS)
> -		goto exit;
> +	ret = bootefi_run_prepare("bootargs", device_path, image_path,
> +				  &image_obj, &loaded_image_info);
> +	if (ret)
> +		return ret;
>  
> -	/* Transfer environment variable bootargs as load options */
> -	set_load_options(loaded_image_info, "bootargs");
>  	/* Load the EFI payload */
>  	entry = efi_load_pe(image_obj, efi, loaded_image_info);
>  	if (!entry) {
> @@ -468,35 +491,23 @@ exit:
>   * @path: File path to the test being run (often just the test name with a
>   *    backslash before it
>   * @test_func: Address of the test function that is being run
> + * @load_options_path: U-Boot environment variable to use as load options
>   * @return 0 if OK, -ve on error
>   */
>  static efi_status_t bootefi_test_prepare(

CHECK: Alignment should match open parenthesis
#29: FILE: cmd/bootefi.c:330:
+static efi_status_t bootefi_run_prepare(const char *load_options_path,
+               struct efi_device_path *device_path,

>  		struct efi_loaded_image_obj **image_objp,
> -		struct efi_loaded_image **loaded_image_infop,
> -		const char *path,
> -		ulong test_func)
> +		struct efi_loaded_image **loaded_image_infop, const char *path,
> +		ulong test_func, const char *load_options_path)
>  {
> -	efi_status_t r;
> -
>  	/* Construct a dummy device path */
>  	bootefi_device_path = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE,
>  					      (uintptr_t)test_func,
>  					      (uintptr_t)test_func);
>  	bootefi_image_path = efi_dp_from_file(NULL, 0, path);
> -	r = efi_setup_loaded_image(bootefi_device_path, bootefi_image_path,
> -				   image_objp, loaded_image_infop);
> -	if (r)
> -		return r;
> -	/*
> -	 * gd lives in a fixed register which may get clobbered while we execute
> -	 * the payload. So save it here and restore it on every callback entry
> -	 */
> -	efi_save_gd();
> -
> -	/* Transfer environment variable efi_selftest as load options */
> -	set_load_options(*loaded_image_infop, "efi_selftest");
>  
> -	return 0;
> +	return bootefi_run_prepare(load_options_path, bootefi_device_path,
> +				   bootefi_image_path, image_objp,
> +				   loaded_image_infop);
>  }
>  
>  /**
> @@ -590,8 +601,8 @@ static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
>  		struct efi_loaded_image *loaded_image_info;
>  
>  		if (bootefi_test_prepare(&image_obj, &loaded_image_info,
> -					 "\\selftest",
> -					 (uintptr_t)&efi_selftest))
> +					 "\\selftest", (uintptr_t)&efi_selftest,
> +					 "efi_selftest"))
>  			return CMD_RET_FAILURE;
>  
>  		/* Execute the test */
> 



More information about the U-Boot mailing list