[U-Boot] [PATCH v2 1/3] riscv: Add kconfig option to run u-boot in S-mode

Anup Patel anup at brainfault.org
Tue Nov 20 11:29:31 UTC 2018


This patch adds kconfig option RISCV_SMODE to run u-boot in
S-mode. When this opition is enabled we use s<xyz> CSRs instead
of m<xyz> CSRs.

It is important to note that there is no equivalent S-mode CSR
for misa and mhartid CSRs so we expect M-mode runtime firmware
(BBL or equivalent) to emulate misa and mhartid CSR read.

Eventually, we will have patches to avoid accessing misa and
mhartid from S-mode.

Signed-off-by: Anup Patel <anup at brainfault.org>
---
 arch/riscv/Kconfig     |  6 ++++++
 arch/riscv/cpu/start.S | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 3e0af55e71..88bc0d2a43 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -55,6 +55,12 @@ config RISCV_ISA_C
 config RISCV_ISA_A
 	def_bool y
 
+config RISCV_SMODE
+	bool "Run in S-Mode"
+	default n
+	help
+	  Enable this option to build an U-Boot for RISC-V S-Mode
+
 config 32BIT
 	bool
 
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index 5af189b338..e4276e8e19 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -39,10 +39,18 @@ _start:
 	mv	s1, a1
 
 	la	t0, trap_entry
+#ifdef CONFIG_RISCV_SMODE
+	csrw	stvec, t0
+#else
 	csrw	mtvec, t0
+#endif
 
 	/* mask all interrupts */
+#ifdef CONFIG_RISCV_SMODE
+	csrw	sie, zero
+#else
 	csrw	mie, zero
+#endif
 
 	/* Enable cache */
 	jal	icache_enable
@@ -164,7 +172,11 @@ fix_rela_dyn:
 */
 	la	t0, trap_entry
 	add	t0, t0, t6
+#ifdef CONFIG_RISCV_SMODE
+	csrw	stvec, t0
+#else
 	csrw	mtvec, t0
+#endif
 
 clear_bss:
 	la	t0, __bss_start		/* t0 <- rel __bss_start in FLASH */
@@ -236,17 +248,34 @@ trap_entry:
 	SREG	x29, 29*REGBYTES(sp)
 	SREG	x30, 30*REGBYTES(sp)
 	SREG	x31, 31*REGBYTES(sp)
+#ifdef CONFIG_RISCV_SMODE
+	csrr	a0, scause
+	csrr	a1, sepc
+#else
 	csrr	a0, mcause
 	csrr	a1, mepc
+#endif
 	mv	a2, sp
 	jal	handle_trap
+#ifdef CONFIG_RISCV_SMODE
+	csrw	sepc, a0
+#else
 	csrw	mepc, a0
+#endif
 
+#ifdef CONFIG_RISCV_SMODE
+/*
+ * Remain in S-mode after sret
+ */
+	li	t0, SSTATUS_SPP
+	csrs	sstatus, t0
+#else
 /*
  * Remain in M-mode after mret
  */
 	li	t0, MSTATUS_MPP
 	csrs	mstatus, t0
+#endif
 	LREG	x1, 1*REGBYTES(sp)
 	LREG	x2, 2*REGBYTES(sp)
 	LREG	x3, 3*REGBYTES(sp)
@@ -279,4 +308,8 @@ trap_entry:
 	LREG	x30, 30*REGBYTES(sp)
 	LREG	x31, 31*REGBYTES(sp)
 	addi	sp, sp, 32*REGBYTES
+#ifdef CONFIG_RISCV_SMODE
+	sret
+#else
 	mret
+#endif
-- 
2.17.1



More information about the U-Boot mailing list