[U-Boot] [PATCH 11/34] spi: mpc8xxx: Replace defines with enums

Jagan Teki jagan at amarulasolutions.com
Tue Nov 20 12:47:51 UTC 2018


From: Mario Six <mario.six at gdsys.cc>

Replace pre-processor defines with proper enums, and use the BIT macro
where applicable.

Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
 drivers/spi/mpc8xxx_spi.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index 91b639f1e6..7b2ab1e4af 100644
--- a/drivers/spi/mpc8xxx_spi.c
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -10,13 +10,25 @@
 #include <spi.h>
 #include <asm/mpc8xxx_spi.h>
 
-#define SPI_EV_NE	(0x80000000 >> 22)	/* Receiver Not Empty */
-#define SPI_EV_NF	(0x80000000 >> 23)	/* Transmitter Not Full */
-
-#define SPI_MODE_LOOP	(0x80000000 >> 1)	/* Loopback mode */
-#define SPI_MODE_REV	(0x80000000 >> 5)	/* Reverse mode - MSB first */
-#define SPI_MODE_MS	(0x80000000 >> 6)	/* Always master */
-#define SPI_MODE_EN	(0x80000000 >> 7)	/* Enable interface */
+enum {
+	SPI_EV_NE = BIT(31 - 22),	/* Receiver Not Empty */
+	SPI_EV_NF = BIT(31 - 23),	/* Transmitter Not Full */
+};
+
+enum {
+	SPI_MODE_LOOP  = BIT(31 - 1),	/* Loopback mode */
+	SPI_MODE_CI    = BIT(31 - 2),	/* Clock invert */
+	SPI_MODE_CP    = BIT(31 - 3),	/* Clock phase */
+	SPI_MODE_DIV16 = BIT(31 - 4),	/* Divide clock source by 16 */
+	SPI_MODE_REV   = BIT(31 - 5),	/* Reverse mode - MSB first */
+	SPI_MODE_MS    = BIT(31 - 6),	/* Always master */
+	SPI_MODE_EN    = BIT(31 - 7),	/* Enable interface */
+
+	SPI_MODE_LEN_MASK = 0xf00000,
+	SPI_MODE_PM_MASK = 0xf0000,
+
+	SPI_COM_LST = BIT(31 - 9),
+};
 
 #define SPI_TIMEOUT	1000
 
-- 
2.18.0.321.gffc6fa0e3



More information about the U-Boot mailing list