[U-Boot] [PATCH 31/34] spi: Zap omap3_spi driver-related code
Jagan Teki
jagan at amarulasolutions.com
Tue Nov 20 12:48:11 UTC 2018
Dropped
- omap3_spi driver
- SPI, SPI flash CONFIG-items
- CMD_SPI, CMD_SF..etc
Dropped becuase
- no active updates
- no dm conversion
- no reponse for dm converted patch
- driver-model migration expiry
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Makefile | 2 +-
drivers/spi/Makefile | 2 +-
drivers/spi/omap3_spi.c | 126 ----------------------------------------
drivers/spi/spi.c | 1 +
4 files changed, 3 insertions(+), 128 deletions(-)
diff --git a/Makefile b/Makefile
index 3be3bb3118..00f0117b16 100644
--- a/Makefile
+++ b/Makefile
@@ -920,7 +920,7 @@ ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
endif
ifeq ($(CONFIG_DM_SPI),)
ifeq ($(filter $(CONFIG_DAVINCI_SPI) $(CONFIG_KIRKWOOD_SPI) $(CONFIG_MPC8XXX_SPI) \
- $(CONFIG_MXC_SPI) $(CONFIG_TI_QSPI),y),y)
+ $(CONFIG_MXC_SPI) $(CONFIG_OMAP3_SPI) $(CONFIG_TI_QSPI),y),y)
@echo "===================== WARNING ======================"
@echo "This board uses SPI driver from drivers/spi/ without"
@echo "enabling CONFIG_DM_SPI. Please enable CONFIG_DM_SPI"
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 549d104016..7de209830e 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
obj-$(CONFIG_MXC_SPI) += mxc_spi.o
+obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o
obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
obj-$(CONFIG_SOFT_SPI) += soft_spi.o
obj-$(CONFIG_SPI_MEM) += spi-mem.o
@@ -34,7 +35,6 @@ obj-$(CONFIG_ICH_SPI) += ich.o
obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o
obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o
obj-$(CONFIG_ATCSPI200_SPI) += atcspi200_spi.o
-obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o
obj-$(CONFIG_PIC32_SPI) += pic32_spi.o
obj-$(CONFIG_PL022_SPI) += pl022_spi.o
obj-$(CONFIG_RENESAS_RPC_SPI) += renesas_rpc_spi.o
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index c7fcf050a5..5e267d88d7 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -108,9 +108,6 @@ struct mcspi {
};
struct omap3_spi_priv {
-#ifndef CONFIG_DM_SPI
- struct spi_slave slave;
-#endif
struct mcspi *regs;
unsigned int cs;
unsigned int freq;
@@ -454,128 +451,6 @@ static void _omap3_spi_claim_bus(struct omap3_spi_priv *priv)
writel(conf, &priv->regs->modulctrl);
}
-#ifndef CONFIG_DM_SPI
-
-static inline struct omap3_spi_priv *to_omap3_spi(struct spi_slave *slave)
-{
- return container_of(slave, struct omap3_spi_priv, slave);
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct omap3_spi_priv *priv = to_omap3_spi(slave);
-
- free(priv);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- struct omap3_spi_priv *priv = to_omap3_spi(slave);
-
- spi_reset(priv->regs);
-
- _omap3_spi_claim_bus(priv);
- _omap3_spi_set_wordlen(priv);
- _omap3_spi_set_mode(priv);
- _omap3_spi_set_speed(priv);
-
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
- struct omap3_spi_priv *priv = to_omap3_spi(slave);
-
- writel(OMAP3_MCSPI_MODULCTRL_MS, &priv->regs->modulctrl);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct omap3_spi_priv *priv;
- struct mcspi *regs;
-
- /*
- * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
- * with different number of chip selects (CS, channels):
- * McSPI1 has 4 CS (bus 0, cs 0 - 3)
- * McSPI2 has 2 CS (bus 1, cs 0 - 1)
- * McSPI3 has 2 CS (bus 2, cs 0 - 1)
- * McSPI4 has 1 CS (bus 3, cs 0)
- */
-
- switch (bus) {
- case 0:
- regs = (struct mcspi *)OMAP3_MCSPI1_BASE;
- break;
-#ifdef OMAP3_MCSPI2_BASE
- case 1:
- regs = (struct mcspi *)OMAP3_MCSPI2_BASE;
- break;
-#endif
-#ifdef OMAP3_MCSPI3_BASE
- case 2:
- regs = (struct mcspi *)OMAP3_MCSPI3_BASE;
- break;
-#endif
-#ifdef OMAP3_MCSPI4_BASE
- case 3:
- regs = (struct mcspi *)OMAP3_MCSPI4_BASE;
- break;
-#endif
- default:
- printf("SPI error: unsupported bus %i. Supported busses 0 - 3\n", bus);
- return NULL;
- }
-
- if (((bus == 0) && (cs > 3)) ||
- ((bus == 1) && (cs > 1)) ||
- ((bus == 2) && (cs > 1)) ||
- ((bus == 3) && (cs > 0))) {
- printf("SPI error: unsupported chip select %i on bus %i\n", cs, bus);
- return NULL;
- }
-
- if (max_hz > OMAP3_MCSPI_MAX_FREQ) {
- printf("SPI error: unsupported frequency %i Hz. Max frequency is 48 MHz\n",
- max_hz);
- return NULL;
- }
-
- if (mode > SPI_MODE_3) {
- printf("SPI error: unsupported SPI mode %i\n", mode);
- return NULL;
- }
-
- priv = spi_alloc_slave(struct omap3_spi_priv, bus, cs);
- if (!priv) {
- printf("SPI error: malloc of SPI structure failed\n");
- return NULL;
- }
-
- priv->regs = regs;
- priv->cs = cs;
- priv->freq = max_hz;
- priv->mode = mode;
- priv->wordlen = priv->slave.wordlen;
-#if 0
- /* Please migrate to DM_SPI support for this feature. */
- priv->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
-#endif
-
- return &priv->slave;
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
-{
- struct omap3_spi_priv *priv = to_omap3_spi(slave);
-
- return _spi_xfer(priv, bitlen, dout, din, flags);
-}
-
-#else
-
static int omap3_spi_claim_bus(struct udevice *dev)
{
struct udevice *bus = dev->parent;
@@ -700,4 +575,3 @@ U_BOOT_DRIVER(omap3_spi) = {
.ops = &omap3_spi_ops,
.priv_auto_alloc_size = sizeof(struct omap3_spi_priv),
};
-#endif
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 5c13f85841..7f5863f904 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -44,6 +44,7 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
defined(CONFIG_KIRKWOOD_SPI) || \
defined(CONFIG_MPC8XXX_SPI) || \
defined(CONFIG_MXC_SPI) || \
+ defined(CONFIG_OMAP3_SPI) || \
defined(CONFIG_TI_QSPI)
void spi_cs_activate(struct spi_slave *slave)
{
--
2.18.0.321.gffc6fa0e3
More information about the U-Boot
mailing list