[U-Boot] [PATCH 23/93] arm: Remove omap3_overo board
Andrew C. Smith
acsmith at gumstix.com
Tue Nov 20 13:20:31 UTC 2018
Please hold off on the removal. I just became aware of this. We will get
the board updated.
Thanks,
Andrew
> ---------- Forwarded message ---------
>> From: Simon Glass <sjg at chromium.org>
>> Date: Mon, Nov 19, 2018 at 5:54 AM
>> Subject: [PATCH 23/93] arm: Remove omap3_overo board
>> To: U-Boot Mailing List <u-boot at lists.denx.de>
>>
>> This board has not been converted to CONFIG_DM_BLK by the deadline.
>> Remove it.
>>
>> Signed-off-by: Simon Glass <sjg at chromium.org>
>> ---
>>
>> arch/arm/mach-omap2/omap3/Kconfig | 1 -
>> board/overo/Kconfig | 9 -
>> board/overo/MAINTAINERS | 6 -
>> board/overo/Makefile | 10 -
>> board/overo/common.c | 341 ------------------------
>> board/overo/overo.c | 420 ------------------------------
>> board/overo/overo.h | 169 ------------
>> board/overo/spl.c | 59 -----
>> configs/omap3_overo_defconfig | 51 ----
>> include/configs/omap3_overo.h | 192 --------------
>> 10 files changed, 1258 deletions(-)
>> delete mode 100644 board/overo/Kconfig
>> delete mode 100644 board/overo/MAINTAINERS
>> delete mode 100644 board/overo/Makefile
>> delete mode 100644 board/overo/common.c
>> delete mode 100644 board/overo/overo.c
>> delete mode 100644 board/overo/overo.h
>> delete mode 100644 board/overo/spl.c
>> delete mode 100644 configs/omap3_overo_defconfig
>> delete mode 100644 include/configs/omap3_overo.h
>>
>> diff --git a/arch/arm/mach-omap2/omap3/Kconfig
>> b/arch/arm/mach-omap2/omap3/Kconfig
>> index 9bd07dd8c55..4e8be5f9d04 100644
>> --- a/arch/arm/mach-omap2/omap3/Kconfig
>> +++ b/arch/arm/mach-omap2/omap3/Kconfig
>> @@ -200,7 +200,6 @@ source "board/compulab/cm_t35/Kconfig"
>> source "board/compulab/cm_t3517/Kconfig"
>> source "board/timll/devkit8000/Kconfig"
>> source "board/ti/evm/Kconfig"
>> -source "board/overo/Kconfig"
>> source "board/ti/am3517crane/Kconfig"
>> source "board/pandora/Kconfig"
>> source "board/8dtech/eco5pk/Kconfig"
>> diff --git a/board/overo/Kconfig b/board/overo/Kconfig
>> deleted file mode 100644
>> index 74572a62be6..00000000000
>> --- a/board/overo/Kconfig
>> +++ /dev/null
>> @@ -1,9 +0,0 @@
>> -if TARGET_OMAP3_OVERO
>> -
>> -config SYS_BOARD
>> - default "overo"
>> -
>> -config SYS_CONFIG_NAME
>> - default "omap3_overo"
>> -
>> -endif
>> diff --git a/board/overo/MAINTAINERS b/board/overo/MAINTAINERS
>> deleted file mode 100644
>> index 8f089e87f8b..00000000000
>> --- a/board/overo/MAINTAINERS
>> +++ /dev/null
>> @@ -1,6 +0,0 @@
>> -OVERO BOARD
>> -M: Steve Sakoman <sakoman at gmail.com>
>> -S: Maintained
>> -F: board/overo/
>> -F: include/configs/omap3_overo.h
>> -F: configs/omap3_overo_defconfig
>> diff --git a/board/overo/Makefile b/board/overo/Makefile
>> deleted file mode 100644
>> index b62bab9fe4f..00000000000
>> --- a/board/overo/Makefile
>> +++ /dev/null
>> @@ -1,10 +0,0 @@
>> -# SPDX-License-Identifier: GPL-2.0+
>> -#
>> -# (C) Copyright 2000, 2001, 2002
>> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>> -
>> -ifdef CONFIG_SPL_BUILD
>> -obj-y := spl.o common.o
>> -else
>> -obj-y := overo.o common.o
>> -endif
>> diff --git a/board/overo/common.c b/board/overo/common.c
>> deleted file mode 100644
>> index fc02d66d531..00000000000
>> --- a/board/overo/common.c
>> +++ /dev/null
>> @@ -1,341 +0,0 @@
>> -// SPDX-License-Identifier: GPL-2.0+
>> -/*
>> - * Maintainer : Steve Sakoman <steve at sakoman.com>
>> - *
>> - * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
>> - * Richard Woodruff <r-woodruff2 at ti.com>
>> - * Syed Mohammed Khasim <khasim at ti.com>
>> - * Sunil Kumar <sunilsaini05 at gmail.com>
>> - * Shashi Ranjan <shashiranjanmca05 at gmail.com>
>> - *
>> - * (C) Copyright 2004-2008
>> - * Texas Instruments, <www.ti.com>
>> - */
>> -#include <twl4030.h>
>> -#include <common.h>
>> -#include <asm/io.h>
>> -#include <asm/arch/mux.h>
>> -#include <asm/arch/sys_proto.h>
>> -#include <asm/gpio.h>
>> -#include <asm/mach-types.h>
>> -
>> -DECLARE_GLOBAL_DATA_PTR;
>> -
>> -#define TWL4030_I2C_BUS 0
>> -
>> -/*
>> - * Routine: board_init
>> - * Description: Early hardware init.
>> - */
>> -int board_init(void)
>> -{
>> - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
>> - /* board id for Linux */
>> - gd->bd->bi_arch_number = MACH_TYPE_OVERO;
>> - /* boot param addr */
>> - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
>> -
>> - return 0;
>> -}
>> -
>> -#define MUX_OVERO() \
>> - /*SDRC*/\
>> - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0))
>> /*SDRC_D0*/\
>> - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0))
>> /*SDRC_D1*/\
>> - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0))
>> /*SDRC_D2*/\
>> - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0))
>> /*SDRC_D3*/\
>> - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0))
>> /*SDRC_D4*/\
>> - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0))
>> /*SDRC_D5*/\
>> - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0))
>> /*SDRC_D6*/\
>> - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0))
>> /*SDRC_D7*/\
>> - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0))
>> /*SDRC_D8*/\
>> - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0))
>> /*SDRC_D9*/\
>> - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0))
>> /*SDRC_D10*/\
>> - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0))
>> /*SDRC_D11*/\
>> - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0))
>> /*SDRC_D12*/\
>> - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0))
>> /*SDRC_D13*/\
>> - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0))
>> /*SDRC_D14*/\
>> - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0))
>> /*SDRC_D15*/\
>> - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0))
>> /*SDRC_D16*/\
>> - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0))
>> /*SDRC_D17*/\
>> - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0))
>> /*SDRC_D18*/\
>> - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0))
>> /*SDRC_D19*/\
>> - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0))
>> /*SDRC_D20*/\
>> - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0))
>> /*SDRC_D21*/\
>> - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0))
>> /*SDRC_D22*/\
>> - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0))
>> /*SDRC_D23*/\
>> - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0))
>> /*SDRC_D24*/\
>> - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0))
>> /*SDRC_D25*/\
>> - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0))
>> /*SDRC_D26*/\
>> - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0))
>> /*SDRC_D27*/\
>> - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0))
>> /*SDRC_D28*/\
>> - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0))
>> /*SDRC_D29*/\
>> - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0))
>> /*SDRC_D30*/\
>> - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0))
>> /*SDRC_D31*/\
>> - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0))
>> /*SDRC_CLK*/\
>> - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0))
>> /*SDRC_DQS0*/\
>> - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))
>> /*SDRC_DQS1*/\
>> - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))
>> /*SDRC_DQS2*/\
>> - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))
>> /*SDRC_DQS3*/\
>> - /*GPMC*/\
>> - MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0))
>> /*GPMC_A1*/\
>> - MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0))
>> /*GPMC_A2*/\
>> - MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0))
>> /*GPMC_A3*/\
>> - MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0))
>> /*GPMC_A4*/\
>> - MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0))
>> /*GPMC_A5*/\
>> - MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0))
>> /*GPMC_A6*/\
>> - MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0))
>> /*GPMC_A7*/\
>> - MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0))
>> /*GPMC_A8*/\
>> - MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0))
>> /*GPMC_A9*/\
>> - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0))
>> /*GPMC_A10*/\
>> - MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0))
>> /*GPMC_D0*/\
>> - MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0))
>> /*GPMC_D1*/\
>> - MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0))
>> /*GPMC_D2*/\
>> - MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0))
>> /*GPMC_D3*/\
>> - MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0))
>> /*GPMC_D4*/\
>> - MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0))
>> /*GPMC_D5*/\
>> - MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0))
>> /*GPMC_D6*/\
>> - MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0))
>> /*GPMC_D7*/\
>> - MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0))
>> /*GPMC_D8*/\
>> - MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0))
>> /*GPMC_D9*/\
>> - MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0))
>> /*GPMC_D10*/\
>> - MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0))
>> /*GPMC_D11*/\
>> - MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0))
>> /*GPMC_D12*/\
>> - MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0))
>> /*GPMC_D13*/\
>> - MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0))
>> /*GPMC_D14*/\
>> - MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0))
>> /*GPMC_D15*/\
>> - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0))
>> /*GPMC_nCS0*/\
>> - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0))
>> /*GPMC_nCS2*/\
>> - MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4))
>> /*GPIO_54*/\
>> - /* -
>> MMC1_WP*/\
>> - MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0))
>> /*GPMC_nCS7*/\
>> - MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0))
>> /*GPMC_nCS3*/\
>> - MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M0))
>> /*GPMC_CLK*/\
>> - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0))
>> /*GPMC_nADV_ALE*/\
>> - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0))
>> /*GPMC_nOE*/\
>> - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0))
>> /*GPMC_nWE*/\
>> - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0))
>> /*GPMC_nBE0_CLE*/\
>> - MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0))
>> /*GPMC_nWP*/\
>> - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0))
>> /*GPMC_WAIT0*/\
>> - /*CAMERA*/\
>> - MUX_VAL(CP(CAM_HS), (IEN | PTU | DIS | M0)) /*CAM_HS
>> */\
>> - MUX_VAL(CP(CAM_VS), (IEN | PTU | DIS | M0)) /*CAM_VS
>> */\
>> - MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0))
>> /*CAM_XCLKA*/\
>> - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | DIS | M0))
>> /*CAM_PCLK*/\
>> - MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0))
>> /*CAM_D0*/\
>> - MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0))
>> /*CAM_D1*/\
>> - MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0))
>> /*CAM_D2*/\
>> - MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0))
>> /*CAM_D3*/\
>> - MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0))
>> /*CAM_D4*/\
>> - MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0))
>> /*CAM_D5*/\
>> - MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0))
>> /*CAM_D6*/\
>> - MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0))
>> /*CAM_D7*/\
>> - MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0))
>> /*CAM_D8*/\
>> - MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0))
>> /*CAM_D9*/\
>> - MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0))
>> /*CAM_D10*/\
>> - MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0))
>> /*CAM_D11*/\
>> - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4))
>> /*GPIO_112*/\
>> - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4))
>> /*GPIO_113*/\
>> - MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4))
>> /*GPIO_115*/\
>> - /*Audio Interface */\
>> - MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0))
>> /*McBSP2_FSX*/\
>> - MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0))
>> /*McBSP2_CLKX*/\
>> - MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0))
>> /*McBSP2_DR*/\
>> - MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0))
>> /*McBSP2_DX*/\
>> - /*Expansion card */\
>> - MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0))
>> /*MMC1_CLK*/\
>> - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0))
>> /*MMC1_CMD*/\
>> - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0))
>> /*MMC1_DAT0*/\
>> - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0))
>> /*MMC1_DAT1*/\
>> - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0))
>> /*MMC1_DAT2*/\
>> - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0))
>> /*MMC1_DAT3*/\
>> - MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0))
>> /*MMC1_DAT4*/\
>> - MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0))
>> /*MMC1_DAT5*/\
>> - MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0))
>> /*MMC1_DAT6*/\
>> - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0))
>> /*MMC1_DAT7*/\
>> - /*Wireless LAN */\
>> - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4))
>> /*GPIO_130*/\
>> - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0))
>> /*MMC2_CMD*/\
>> - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0))
>> /*MMC2_DAT0*/\
>> - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0))
>> /*MMC2_DAT1*/\
>> - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0))
>> /*MMC2_DAT2*/\
>> - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0))
>> /*MMC2_DAT3*/\
>> - MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1))
>> /*MMC2_DIR_DAT0*/\
>> - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1))
>> /*MMC2_DIR_DAT1*/\
>> - MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1))
>> /*MMC2_DIR_CMD*/\
>> - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4))
>> /*GPIO_139*/\
>> - /*Bluetooth*/\
>> - MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1))
>> /*UART2_CTS*/\
>> - MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1))
>> /*UART2_RTS*/\
>> - MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1))
>> /*UART2_TX*/\
>> - MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1))
>> /*UART2_RX*/\
>> - MUX_VAL(CP(UART1_RTS), (IEN | PTU | DIS | M4))
>> /*GPIO_149*/ \
>> - MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M0))
>> /*McBSP4_CLKX*/\
>> - MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M0))
>> /*McBSP4_DR*/\
>> - MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M0))
>> /*McBSP4_DX*/\
>> - MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M0))
>> /*McBSP4_FSX*/\
>> - MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0))
>> /*McBSP1_CLKR*/\
>> - MUX_VAL(CP(MCBSP1_FSR), (IEN | PTD | DIS | M0))
>> /*McBSP1_FSR*/\
>> - MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M0))
>> /*McBSP1_DX*/\
>> - MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0))
>> /*McBSP1_DR*/\
>> - MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0))
>> /*McBSP_CLKS*/\
>> - MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0))
>> /*McBSP1_FSX*/\
>> - MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0))
>> /*McBSP1_CLKX*/\
>> - /*Serial Interface*/\
>> - MUX_VAL(CP(UART3_RTS_SD), (IEN | PTU | EN | M4))
>> /*GPIO_164 W2W_*/\
>> - /*
>> BT_NRESET*/\
>> - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTU | EN | M0))
>> /*UART3_RX_IRRX*/\
>> - MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0))
>> /*UART3_TX_IRTX*/\
>> - MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0))
>> /*HSUSB0_CLK*/\
>> - MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0))
>> /*HSUSB0_STP*/\
>> - MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0))
>> /*HSUSB0_DIR*/\
>> - MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0))
>> /*HSUSB0_NXT*/\
>> - MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0))
>> /*HSUSB0_DATA0*/\
>> - MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0))
>> /*HSUSB0_DATA1*/\
>> - MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0))
>> /*HSUSB0_DATA2*/\
>> - MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0))
>> /*HSUSB0_DATA3*/\
>> - MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0))
>> /*HSUSB0_DATA4*/\
>> - MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0))
>> /*HSUSB0_DATA5*/\
>> - MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0))
>> /*HSUSB0_DATA6*/\
>> - MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0))
>> /*HSUSB0_DATA7*/\
>> - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0))
>> /*I2C1_SCL*/\
>> - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0))
>> /*I2C1_SDA*/\
>> - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4))
>> /*GPIO_168*/\
>> - /* -
>> USBH_CPEN*/\
>> - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4))
>> /*GPIO_183*/\
>> - /* -
>> USBH_RESET*/\
>> - MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0))
>> /*I2C3_SCL*/\
>> - MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0))
>> /*I2C3_SDA*/\
>> - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0))
>> /*I2C4_SCL*/\
>> - MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0))
>> /*I2C4_SDA*/\
>> - MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | DIS | M3))
>> /*HSUSB2_DATA2*/\
>> - MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M3))
>> /*HSUSB2_DATA7*/\
>> - MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M3))
>> /*HSUSB2_DATA4*/\
>> - MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M3))
>> /*HSUSB2_DATA5*/\
>> - MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | DIS | M3))
>> /*HSUSB2_DATA6*/\
>> - MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | DIS | M3))
>> /*HSUSB2_DATA3*/\
>> - /*Control and debug */\
>> - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0))
>> /*SYS_32K*/\
>> - MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0))
>> /*SYS_CLKREQ*/\
>> - MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0))
>> /*SYS_nIRQ*/\
>> - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4))
>> /*GPIO_2*/\
>> - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3
>> */\
>> - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4))
>> /*GPIO_4 - MMC1_WP*/\
>> - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4))
>> /*GPIO_5*/\
>> - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4))
>> /*GPIO_6*/\
>> - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4))
>> /*GPIO_7*/\
>> - MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4))
>> /*GPIO_8*/\
>> - MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0))
>> /*SYS_OFF_MODE*/\
>> - MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M4))
>> /*GPIO_15 - X_GATE*/\
>> - MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M4))
>> /*GPIO_16*/\
>> - /* -
>> W2W_NRESET*/\
>> - MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3))
>> /*HSUSB2_CLK*/\
>> - MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3))
>> /*HSUSB2_STP*/\
>> - MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M3))
>> /*HSUSB2_DIR*/\
>> - MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3))
>> /*HSUSB2_NXT*/\
>> - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M3))
>> /*HSUSB2_DATA0*/\
>> - MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M3))
>> /*HSUSB2_DATA1*/\
>> - /* die to die */\
>> - MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0))
>> /*d2d_mcad1*/\
>> - MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0))
>> /*d2d_mcad2*/\
>> - MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0))
>> /*d2d_mcad3*/\
>> - MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0))
>> /*d2d_mcad4*/\
>> - MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0))
>> /*d2d_mcad5*/\
>> - MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0))
>> /*d2d_mcad6*/\
>> - MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0))
>> /*d2d_mcad7*/\
>> - MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0))
>> /*d2d_mcad8*/\
>> - MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0))
>> /*d2d_mcad9*/\
>> - MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0))
>> /*d2d_mcad10*/\
>> - MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0))
>> /*d2d_mcad11*/\
>> - MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0))
>> /*d2d_mcad12*/\
>> - MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0))
>> /*d2d_mcad13*/\
>> - MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0))
>> /*d2d_mcad14*/\
>> - MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0))
>> /*d2d_mcad15*/\
>> - MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0))
>> /*d2d_mcad16*/\
>> - MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0))
>> /*d2d_mcad17*/\
>> - MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0))
>> /*d2d_mcad18*/\
>> - MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0))
>> /*d2d_mcad19*/\
>> - MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0))
>> /*d2d_mcad20*/\
>> - MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0))
>> /*d2d_mcad21*/\
>> - MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0))
>> /*d2d_mcad22*/\
>> - MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0))
>> /*d2d_mcad23*/\
>> - MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0))
>> /*d2d_mcad24*/\
>> - MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0))
>> /*d2d_mcad25*/\
>> - MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0))
>> /*d2d_mcad26*/\
>> - MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0))
>> /*d2d_mcad27*/\
>> - MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0))
>> /*d2d_mcad28*/\
>> - MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0))
>> /*d2d_mcad29*/\
>> - MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0))
>> /*d2d_mcad30*/\
>> - MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0))
>> /*d2d_mcad31*/\
>> - MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0))
>> /*d2d_mcad32*/\
>> - MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0))
>> /*d2d_mcad33*/\
>> - MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0))
>> /*d2d_mcad34*/\
>> - MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0))
>> /*d2d_mcad35*/\
>> - MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0))
>> /*d2d_mcad36*/\
>> - MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0))
>> /*d2d_clk26mi*/\
>> - MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0))
>> /*d2d_nrespwron*/\
>> - MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0))
>> /*d2d_nreswarm */\
>> - MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0))
>> /*d2d_arm9nirq */\
>> - MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0))
>> /*d2d_uma2p6fiq*/\
>> - MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0))
>> /*d2d_spint*/\
>> - MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0))
>> /*d2d_frint*/\
>> - MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0))
>> /*d2d_dmareq0*/\
>> - MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0))
>> /*d2d_dmareq1*/\
>> - MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0))
>> /*d2d_dmareq2*/\
>> - MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0))
>> /*d2d_dmareq3*/\
>> - MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0))
>> /*d2d_n3gtrst*/\
>> - MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0))
>> /*d2d_n3gtdi*/\
>> - MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0))
>> /*d2d_n3gtdo*/\
>> - MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0))
>> /*d2d_n3gtms*/\
>> - MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0))
>> /*d2d_n3gtck*/\
>> - MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0))
>> /*d2d_n3grtck*/\
>> - MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0))
>> /*d2d_mstdby*/\
>> - MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0))
>> /*d2d_swakeup*/\
>> - MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0))
>> /*d2d_idlereq*/\
>> - MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0))
>> /*d2d_idleack*/\
>> - MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0))
>> /*d2d_mwrite*/\
>> - MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0))
>> /*d2d_swrite*/\
>> - MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0))
>> /*d2d_mread*/\
>> - MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0))
>> /*d2d_sread*/\
>> - MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0))
>> /*d2d_mbusflag*/\
>> - MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0))
>> /*d2d_sbusflag*/\
>> - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))
>> /*sdrc_cke0*/\
>> - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0))
>> /*sdrc_cke1*/
>> -
>> -/*
>> - * Routine: get_board_revision
>> - * Description: Returns the board revision
>> - */
>> -int get_board_revision(void)
>> -{
>> - int revision;
>> -
>> - if (!gpio_request(112, "") &&
>> - !gpio_request(113, "") &&
>> - !gpio_request(115, "")) {
>> -
>> - gpio_direction_input(112);
>> - gpio_direction_input(113);
>> - gpio_direction_input(115);
>> -
>> - revision = gpio_get_value(115) << 2 |
>> - gpio_get_value(113) << 1 |
>> - gpio_get_value(112);
>> - } else {
>> - puts("Error: unable to acquire board revision GPIOs\n");
>> - revision = -1;
>> - }
>> -
>> - return revision;
>> -}
>> -
>> -/*
>> - * Routine: set_muxconf_regs
>> - * Description: Setting up the configuration Mux registers specific to
>> the
>> - * hardware. Many pins need to be moved from protect to
>> primary
>> - * mode.
>> - */
>> -void set_muxconf_regs(void)
>> -{
>> - MUX_OVERO();
>> -}
>> diff --git a/board/overo/overo.c b/board/overo/overo.c
>> deleted file mode 100644
>> index 8fa41f81550..00000000000
>> --- a/board/overo/overo.c
>> +++ /dev/null
>> @@ -1,420 +0,0 @@
>> -// SPDX-License-Identifier: GPL-2.0+
>> -/*
>> - * Maintainer : Steve Sakoman <steve at sakoman.com>
>> - *
>> - * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
>> - * Richard Woodruff <r-woodruff2 at ti.com>
>> - * Syed Mohammed Khasim <khasim at ti.com>
>> - * Sunil Kumar <sunilsaini05 at gmail.com>
>> - * Shashi Ranjan <shashiranjanmca05 at gmail.com>
>> - *
>> - * (C) Copyright 2004-2008
>> - * Texas Instruments, <www.ti.com>
>> - */
>> -#include <common.h>
>> -#include <dm.h>
>> -#include <ns16550.h>
>> -#include <netdev.h>
>> -#include <twl4030.h>
>> -#include <linux/mtd/rawnand.h>
>> -#include <asm/io.h>
>> -#include <asm/arch/mmc_host_def.h>
>> -#include <asm/arch/mux.h>
>> -#include <asm/arch/mem.h>
>> -#include <asm/arch/sys_proto.h>
>> -#include <asm/gpio.h>
>> -#include <asm/mach-types.h>
>> -#include "overo.h"
>> -
>> -#ifdef CONFIG_USB_EHCI_HCD
>> -#include <usb.h>
>> -#include <asm/ehci-omap.h>
>> -#endif
>> -
>> -#define TWL4030_I2C_BUS 0
>> -#define EXPANSION_EEPROM_I2C_BUS 2
>> -#define EXPANSION_EEPROM_I2C_ADDRESS 0x51
>> -
>> -#define GUMSTIX_EMPTY_EEPROM 0x0
>> -
>> -#define GUMSTIX_SUMMIT 0x01000200
>> -#define GUMSTIX_TOBI 0x02000200
>> -#define GUMSTIX_TOBI_DUO 0x03000200
>> -#define GUMSTIX_PALO35 0x04000200
>> -#define GUMSTIX_PALO43 0x05000200
>> -#define GUMSTIX_CHESTNUT43 0x06000200
>> -#define GUMSTIX_PINTO 0x07000200
>> -#define GUMSTIX_GALLOP43 0x08000200
>> -#define GUMSTIX_ALTO35 0x09000200
>> -#define GUMSTIX_STAGECOACH 0x0A000200
>> -#define GUMSTIX_THUMBO 0x0B000200
>> -#define GUMSTIX_TURTLECORE 0x0C000200
>> -#define GUMSTIX_ARBOR43C 0x0D000200
>> -
>> -#define ETTUS_USRP_E 0x01000300
>> -
>> -#define GUMSTIX_NO_EEPROM 0xffffffff
>> -
>> -static struct {
>> - unsigned int device_vendor;
>> - unsigned char revision;
>> - unsigned char content;
>> - char fab_revision[8];
>> - char env_var[16];
>> - char env_setting[64];
>> -} expansion_config = {0x0};
>> -
>> -static const struct ns16550_platdata overo_serial = {
>> - .base = OMAP34XX_UART3,
>> - .reg_shift = 2,
>> - .clock = V_NS16550_CLK,
>> - .fcr = UART_FCR_DEFVAL,
>> -};
>> -
>> -U_BOOT_DEVICE(overo_uart) = {
>> - "ns16550_serial",
>> - &overo_serial
>> -};
>> -
>> -/*
>> - * Routine: get_sdio2_config
>> - * Description: Return information about the wifi module connection
>> - * Returns 0 if the module connects though a level
>> translator
>> - * Returns 1 if the module connects directly
>> - */
>> -int get_sdio2_config(void)
>> -{
>> - int sdio_direct;
>> -
>> - if (!gpio_request(130, "") && !gpio_request(139, "")) {
>> -
>> - gpio_direction_output(130, 0);
>> - gpio_direction_input(139);
>> -
>> - sdio_direct = 1;
>> - gpio_set_value(130, 0);
>> - if (gpio_get_value(139) == 0) {
>> - gpio_set_value(130, 1);
>> - if (gpio_get_value(139) == 1)
>> - sdio_direct = 0;
>> - }
>> -
>> - gpio_direction_input(130);
>> - } else {
>> - puts("Error: unable to acquire sdio2 clk GPIOs\n");
>> - sdio_direct = -1;
>> - }
>> -
>> - return sdio_direct;
>> -}
>> -
>> -/*
>> - * Routine: get_expansion_id
>> - * Description: This function checks for expansion board by checking I2C
>> - * bus 2 for the availability of an AT24C01B serial EEPROM.
>> - * returns the device_vendor field from the EEPROM
>> - */
>> -unsigned int get_expansion_id(void)
>> -{
>> - if (expansion_config.device_vendor != 0x0)
>> - return expansion_config.device_vendor;
>> -
>> - i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
>> -
>> - /* return GUMSTIX_NO_EEPROM if eeprom doesn't respond */
>> - if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
>> - i2c_set_bus_num(TWL4030_I2C_BUS);
>> - return GUMSTIX_NO_EEPROM;
>> - }
>> -
>> - /* read configuration data */
>> - i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8
>> *)&expansion_config,
>> - sizeof(expansion_config));
>> -
>> - i2c_set_bus_num(TWL4030_I2C_BUS);
>> -
>> - return expansion_config.device_vendor;
>> -}
>> -
>> -/*
>> - * Routine: misc_init_r
>> - * Description: Configure board specific parts
>> - */
>> -int misc_init_r(void)
>> -{
>> - unsigned int expansion_id;
>> -
>> - twl4030_power_init();
>> - twl4030_led_init(TWL4030_LED_LEDEN_LEDAON |
>> TWL4030_LED_LEDEN_LEDBON);
>> -
>> - printf("Board revision: %d\n", get_board_revision());
>> -
>> - switch (get_sdio2_config()) {
>> - case 0:
>> - puts("Tranceiver detected on mmc2\n");
>> - MUX_OVERO_SDIO2_TRANSCEIVER();
>> - break;
>> - case 1:
>> - puts("Direct connection on mmc2\n");
>> - MUX_OVERO_SDIO2_DIRECT();
>> - break;
>> - default:
>> - puts("Unable to detect mmc2 connection type\n");
>> - }
>> -
>> - expansion_id = get_expansion_id();
>> - switch (expansion_id) {
>> - case GUMSTIX_SUMMIT:
>> - printf("Recognized Summit expansion board (rev %d %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - env_set("defaultdisplay", "dvi");
>> - env_set("expansionname", "summit");
>> - break;
>> - case GUMSTIX_TOBI:
>> - printf("Recognized Tobi expansion board (rev %d %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - env_set("defaultdisplay", "dvi");
>> - env_set("expansionname", "tobi");
>> - break;
>> - case GUMSTIX_TOBI_DUO:
>> - printf("Recognized Tobi Duo expansion board (rev %d
>> %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - env_set("expansionname", "tobiduo");
>> - break;
>> - case GUMSTIX_PALO35:
>> - printf("Recognized Palo35 expansion board (rev %d %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - env_set("defaultdisplay", "lcd35");
>> - env_set("expansionname", "palo35");
>> - break;
>> - case GUMSTIX_PALO43:
>> - printf("Recognized Palo43 expansion board (rev %d %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - env_set("defaultdisplay", "lcd43");
>> - env_set("expansionname", "palo43");
>> - break;
>> - case GUMSTIX_CHESTNUT43:
>> - printf("Recognized Chestnut43 expansion board (rev %d
>> %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - env_set("defaultdisplay", "lcd43");
>> - env_set("expansionname", "chestnut43");
>> - break;
>> - case GUMSTIX_PINTO:
>> - printf("Recognized Pinto expansion board (rev %d %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - break;
>> - case GUMSTIX_GALLOP43:
>> - printf("Recognized Gallop43 expansion board (rev %d
>> %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - env_set("defaultdisplay", "lcd43");
>> - env_set("expansionname", "gallop43");
>> - break;
>> - case GUMSTIX_ALTO35:
>> - printf("Recognized Alto35 expansion board (rev %d %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - MUX_ALTO35();
>> - env_set("defaultdisplay", "lcd35");
>> - env_set("expansionname", "alto35");
>> - break;
>> - case GUMSTIX_STAGECOACH:
>> - printf("Recognized Stagecoach expansion board (rev %d
>> %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - break;
>> - case GUMSTIX_THUMBO:
>> - printf("Recognized Thumbo expansion board (rev %d %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - break;
>> - case GUMSTIX_TURTLECORE:
>> - printf("Recognized Turtlecore expansion board (rev %d
>> %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - break;
>> - case GUMSTIX_ARBOR43C:
>> - printf("Recognized Arbor43C expansion board (rev %d
>> %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - MUX_ARBOR43C();
>> - env_set("defaultdisplay", "lcd43");
>> - env_set("expansionname", "arbor43c");
>> - break;
>> - case ETTUS_USRP_E:
>> - printf("Recognized Ettus Research USRP-E (rev %d %s)\n",
>> - expansion_config.revision,
>> - expansion_config.fab_revision);
>> - MUX_GUMSTIX();
>> - MUX_USRP_E();
>> - env_set("defaultdisplay", "dvi");
>> - break;
>> - case GUMSTIX_NO_EEPROM:
>> - case GUMSTIX_EMPTY_EEPROM:
>> - puts("No or empty EEPROM on expansion board\n");
>> - MUX_GUMSTIX();
>> - env_set("expansionname", "tobi");
>> - break;
>> - default:
>> - printf("Unrecognized expansion board 0x%08x\n",
>> expansion_id);
>> - break;
>> - }
>> -
>> - if (expansion_config.content == 1)
>> - env_set(expansion_config.env_var,
>> expansion_config.env_setting);
>> -
>> - omap_die_id_display();
>> -
>> - if (get_cpu_family() == CPU_OMAP34XX)
>> - env_set("boardname", "overo");
>> - else
>> - env_set("boardname", "overo-storm");
>> -
>> - return 0;
>> -}
>> -
>> -#if defined(CONFIG_CMD_NET)
>> -/* GPMC definitions for LAN9221 chips on Tobi expansion boards */
>> -static const u32 gpmc_lan_config[] = {
>> - NET_LAN9221_GPMC_CONFIG1,
>> - NET_LAN9221_GPMC_CONFIG2,
>> - NET_LAN9221_GPMC_CONFIG3,
>> - NET_LAN9221_GPMC_CONFIG4,
>> - NET_LAN9221_GPMC_CONFIG5,
>> - NET_LAN9221_GPMC_CONFIG6,
>> - /*CONFIG7- computed as params */
>> -};
>> -
>> -/*
>> - * Routine: setup_net_chip
>> - * Description: Setting up the configuration GPMC registers specific to
>> the
>> - * Ethernet hardware.
>> - */
>> -static void setup_net_chip(void)
>> -{
>> - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
>> -
>> - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
>> - writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00,
>> &ctrl_base->gpmc_nwe);
>> - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
>> - writew(readw(&ctrl_base->gpmc_noe) | 0x0E00,
>> &ctrl_base->gpmc_noe);
>> - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
>> - writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
>> - &ctrl_base->gpmc_nadv_ale);
>> -}
>> -
>> -/*
>> - * Routine: reset_net_chip
>> - * Description: Reset the Ethernet hardware.
>> - */
>> -static void reset_net_chip(void)
>> -{
>> - /* Make GPIO 64 as output pin and send a magic pulse through it */
>> - if (!gpio_request(64, "")) {
>> - gpio_direction_output(64, 0);
>> - gpio_set_value(64, 1);
>> - udelay(1);
>> - gpio_set_value(64, 0);
>> - udelay(1);
>> - gpio_set_value(64, 1);
>> - }
>> -}
>> -
>> -int board_eth_init(bd_t *bis)
>> -{
>> - unsigned int expansion_id;
>> - int rc = 0;
>> -
>> -#ifdef CONFIG_SMC911X
>> - expansion_id = get_expansion_id();
>> - switch (expansion_id) {
>> - case GUMSTIX_TOBI_DUO:
>> - /* second lan chip */
>> - enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4],
>> - 0x2B000000, GPMC_SIZE_16M);
>> - /* no break */
>> - case GUMSTIX_TOBI:
>> - case GUMSTIX_CHESTNUT43:
>> - case GUMSTIX_STAGECOACH:
>> - case GUMSTIX_NO_EEPROM:
>> - case GUMSTIX_EMPTY_EEPROM:
>> - /* first lan chip */
>> - enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
>> - 0x2C000000, GPMC_SIZE_16M);
>> -
>> - setup_net_chip();
>> - reset_net_chip();
>> -
>> - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
>> - break;
>> - default:
>> - break;
>> - }
>> -#endif
>> -
>> - return rc;
>> -}
>> -#endif
>> -
>> -#if defined(CONFIG_MMC)
>> -int board_mmc_init(bd_t *bis)
>> -{
>> - return omap_mmc_init(0, 0, 0, -1, -1);
>> -}
>> -#endif
>> -
>> -#if defined(CONFIG_MMC)
>> -void board_mmc_power_init(void)
>> -{
>> - twl4030_power_mmc_init(0);
>> -}
>> -#endif
>> -
>> -#if defined(CONFIG_USB_EHCI_HCD)
>> -static struct omap_usbhs_board_data usbhs_bdata = {
>> - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
>> - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
>> - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
>> -};
>> -
>> -#define GUMSTIX_GPIO_USBH_CPEN 168
>> -int ehci_hcd_init(int index, enum usb_init_type init,
>> - struct ehci_hccr **hccr, struct ehci_hcor **hcor)
>> -{
>> - /* Enable USB power */
>> - if (!gpio_request(GUMSTIX_GPIO_USBH_CPEN, "usbh_cpen"))
>> - gpio_direction_output(GUMSTIX_GPIO_USBH_CPEN, 1);
>> -
>> - return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
>> -}
>> -
>> -int ehci_hcd_stop(void)
>> -{
>> - /* Disable USB power */
>> - gpio_set_value(GUMSTIX_GPIO_USBH_CPEN, 0);
>> - gpio_free(GUMSTIX_GPIO_USBH_CPEN);
>> -
>> - return omap_ehci_hcd_stop();
>> -}
>> -
>> -#endif /* CONFIG_USB_EHCI_HCD */
>> diff --git a/board/overo/overo.h b/board/overo/overo.h
>> deleted file mode 100644
>> index 513a3e3d632..00000000000
>> --- a/board/overo/overo.h
>> +++ /dev/null
>> @@ -1,169 +0,0 @@
>> -/* SPDX-License-Identifier: GPL-2.0+ */
>> -/*
>> - * (C) Copyright 2008
>> - * Steve Sakoman <steve at sakoman.com>
>> - */
>> -#ifndef _OVERO_H_
>> -#define _OVERO_H_
>> -
>> -const omap3_sysinfo sysinfo = {
>> - DDR_STACKED,
>> - "Gumstix Overo board",
>> -#if defined(CONFIG_ENV_IS_IN_ONENAND)
>> - "OneNAND",
>> -#else
>> - "NAND",
>> -#endif
>> -};
>> -
>> -int get_board_revision(void);
>> -
>> -/* overo revisions */
>> -#define REVISION_0 0x0
>> -#define REVISION_1 0x1
>> -#define REVISION_2 0x2
>> -#define REVISION_3 0x3
>> -#define REVISION_4 0x4
>> -
>> -/*
>> - * IEN - Input Enable
>> - * IDIS - Input Disable
>> - * PTD - Pull type Down
>> - * PTU - Pull type Up
>> - * DIS - Pull type selection is inactive
>> - * EN - Pull type selection is active
>> - * M0 - Mode 0
>> - * The commented string gives the final mux configuration for that pin
>> - */
>> -#define MUX_GUMSTIX() \
>> - /*GPMC*/\
>> - MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0))
>> /*GPMC_nCS1*/\
>> - MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0))
>> /*GPMC_nCS4*/\
>> - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0))
>> /*GPMC_nCS5*/\
>> - MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0))
>> /*GPMC_nCS6*/\
>> - MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4))
>> /*GPIO_63*/\
>> - /* -
>> CAM_IRQ*/\
>> - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4))
>> /*GPIO_64*/\
>> - /* -
>> SMSC911X_NRES*/\
>> - MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | DIS | M4))
>> /*GPIO_65*/\
>> - /*DSS*/\
>> - MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0))
>> /*DSS_PCLK*/\
>> - MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0))
>> /*DSS_HSYNC*/\
>> - MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0))
>> /*DSS_VSYNC*/\
>> - MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0))
>> /*DSS_ACBIAS*/\
>> - MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA0*/\
>> - MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA1*/\
>> - MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA2*/\
>> - MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA3*/\
>> - MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA4*/\
>> - MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA5*/\
>> - MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA6*/\
>> - MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA7*/\
>> - MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA8*/\
>> - MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA9*/\
>> - MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA10*/\
>> - MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA11*/\
>> - MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA12*/\
>> - MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA13*/\
>> - MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA14*/\
>> - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA15*/\
>> - MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA16*/\
>> - MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA17*/\
>> - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA18*/\
>> - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA19*/\
>> - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA20*/\
>> - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA21*/\
>> - MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA22*/\
>> - MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0))
>> /*DSS_DATA23*/\
>> - /*CAMERA*/\
>> - MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4))
>> /*CAM_FLD*/\
>> - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0))
>> /*CAM_XCLKB*/\
>> - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M0))
>> /*CAM_WEN*/\
>> - MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0))
>> /*CAM_STROBE*/\
>> - MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4))
>> /*GPIO_114*/\
>> - /* -
>> PEN_DOWN*/\
>> - /*Bluetooth*/\
>> - MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4))
>> /*GPIO_144 - LCD_EN*/\
>> - MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4))
>> /*GPIO_145*/\
>> - MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4))
>> /*GPIO_146*/\
>> - MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4))
>> /*GPIO_147*/\
>> - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0))
>> /*UART1_TX*/\
>> - MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M4))
>> /*GPIO_150-MMC3_WP*/\
>> - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0))
>> /*UART1_RX*/\
>> - /*Serial Interface*/\
>> - MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0))
>> /*UART3_CTS_RCTX*/\
>> - MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4))
>> /*HDQ_SIO*/\
>> - MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0))
>> /*McSPI1_CLK*/\
>> - MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0))
>> /*McSPI1_SIMO */\
>> - MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0))
>> /*McSPI1_SOMI */\
>> - MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0))
>> /*McSPI1_CS0*/\
>> - MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0))
>> /*McSPI1_CS1*/\
>> - MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4))
>> /*GPIO_176 */\
>> - /* -
>> LAN_INTR */\
>> - /*Control and debug */\
>> - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4))
>> /*GPIO_10*/\
>> - MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4))
>> /*GPIO_186*/\
>> - MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M2))
>> /*MMC3_CLK*/\
>> - MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2))
>> /*MMC3_CMD*/\
>> - MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M4))
>> /*GPIO_14*/\
>> - MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | EN | M2))
>> /*MMC3_DAT3*/\
>> - MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M2))
>> /*MMC3_DAT0*/\
>> - MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M2))
>> /*MMC3_DAT1*/\
>> - MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M2))
>> /*MMC3_DAT2*/\
>> - MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M4))
>> /*GPIO_21*/\
>> - MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M4))
>> /*GPIO_22*/\
>> - MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M4))
>> /*GPIO_23*/\
>> -
>> -#define MUX_OVERO_SDIO2_DIRECT() \
>> - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0))
>> /*MMC2_CLK*/\
>> - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0))
>> /*MMC2_CMD*/\
>> - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0))
>> /*MMC2_DAT0*/\
>> - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0))
>> /*MMC2_DAT1*/\
>> - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0))
>> /*MMC2_DAT2*/\
>> - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0))
>> /*MMC2_DAT3*/\
>> - MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M0))
>> /*MMC2_DAT4*/\
>> - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M0))
>> /*MMC2_DAT5*/\
>> - MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M0))
>> /*MMC2_DAT6*/\
>> - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M0))
>> /*MMC2_DAT7*/\
>> - MUX_VAL(CP(MMC1_DAT4), (IEN | PTD | EN | M4))
>> /*GPIO_126*/\
>> - MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4))
>> /*GPIO_127*/\
>> - MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4))
>> /*GPIO_128*/\
>> - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4))
>> /*GPIO_129*/
>> -
>> -#define MUX_OVERO_SDIO2_TRANSCEIVER() \
>> - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0))
>> /*MMC2_CLK*/\
>> - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0))
>> /*MMC2_CMD*/\
>> - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0))
>> /*MMC2_DAT0*/\
>> - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0))
>> /*MMC2_DAT1*/\
>> - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0))
>> /*MMC2_DAT2*/\
>> - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0))
>> /*MMC2_DAT3*/\
>> - MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1))
>> /*MMC2_DIR_DAT0*/\
>> - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1))
>> /*MMC2_DIR_DAT1*/\
>> - MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1))
>> /*MMC2_DIR_CMD*/\
>> - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1))
>> /*MMC2_CLKIN*/\
>> - MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4))
>> /*GPIO_126*/\
>> - MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4))
>> /*GPIO_127*/\
>> - MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4))
>> /*GPIO_128*/\
>> - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4))
>> /*GPIO_129*/
>> -
>> -#define MUX_USRP_E() \
>> - MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M4))
>> /*GPIO_173 */\
>> - MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M4))
>> /*GPIO_175 */\
>> -
>> -#define MUX_ALTO35() \
>> - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4))
>> /*GPIO_10-BTN*/\
>> - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M4))
>> /*GPIO_148-RED LED*/\
>> - MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4))
>> /*GPIO_150-YELLOW LED*/\
>> - MUX_VAL(CP(UART1_RX), (IDIS | PTD | DIS | M4))
>> /*GPIO_151-BLUE LED*/\
>> - MUX_VAL(CP(HDQ_SIO), (IDIS | PTD | DIS | M4))
>> /*GPIO_170-GREEN LED*/\
>> - MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M4))
>> /*GPIO_175*/\
>> -
>> -#define MUX_ARBOR43C() \
>> - MUX_VAL(CP(CSI2_DX1), (IDIS | PTD | DIS | M4))
>> /*GPIO_114-RED LED*/\
>> - MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4))
>> /*GPIO_150-YELLOW LED*/\
>> - MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M4))
>> /*GPIO_170-BUTTON */\
>> - MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4))
>> /*GPIO_186-BLUE LED*/\
>> - MUX_VAL(CP(JTAG_EMU1), (IDIS | PTD | DIS | M4))
>> /*GPIO_31-CAP WAKE*/\
>> - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4))
>> /*GPIO_10-CAP IRQ*/\
>> -
>> -#endif
>> diff --git a/board/overo/spl.c b/board/overo/spl.c
>> deleted file mode 100644
>> index d577e00fbca..00000000000
>> --- a/board/overo/spl.c
>> +++ /dev/null
>> @@ -1,59 +0,0 @@
>> -// SPDX-License-Identifier: GPL-2.0+
>> -/*
>> - * Maintainer : Steve Sakoman <steve at sakoman.com>
>> - *
>> - * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
>> - * Richard Woodruff <r-woodruff2 at ti.com>
>> - * Syed Mohammed Khasim <khasim at ti.com>
>> - * Sunil Kumar <sunilsaini05 at gmail.com>
>> - * Shashi Ranjan <shashiranjanmca05 at gmail.com>
>> - *
>> - * (C) Copyright 2004-2008
>> - * Texas Instruments, <www.ti.com>
>> - */
>> -#include <asm/io.h>
>> -#include <asm/arch/mem.h>
>> -#include <asm/arch/sys_proto.h>
>> -#include "overo.h"
>> -
>> -/*
>> - * Routine: get_board_mem_timings
>> - * Description: If we use SPL then there is no x-loader nor config header
>> - * so we have to setup the DDR timings ourself on both banks.
>> - */
>> -void get_board_mem_timings(struct board_sdrc_timings *timings)
>> -{
>> - timings->mr = MICRON_V_MR_165;
>> - switch (get_board_revision()) {
>> - case REVISION_0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */
>> - timings->mcfg = MICRON_V_MCFG_165(256 << 20);
>> - timings->ctrla = MICRON_V_ACTIMA_165;
>> - timings->ctrlb = MICRON_V_ACTIMB_165;
>> - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
>> - break;
>> - case REVISION_1: /* Micron 256MB/512MB, 1/2 banks of 256MB */
>> - case REVISION_4:
>> - timings->mcfg = MICRON_V_MCFG_200(256 << 20);
>> - timings->ctrla = MICRON_V_ACTIMA_200;
>> - timings->ctrlb = MICRON_V_ACTIMB_200;
>> - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
>> - break;
>> - case REVISION_2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */
>> - timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
>> - timings->ctrla = HYNIX_V_ACTIMA_200;
>> - timings->ctrlb = HYNIX_V_ACTIMB_200;
>> - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
>> - break;
>> - case REVISION_3: /* Micron 512MB/1024MB, 1/2 banks of 512MB */
>> - timings->mcfg = MCFG(512 << 20, 15);
>> - timings->ctrla = MICRON_V_ACTIMA_200;
>> - timings->ctrlb = MICRON_V_ACTIMB_200;
>> - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
>> - break;
>> - default:
>> - timings->mcfg = MICRON_V_MCFG_165(128 << 20);
>> - timings->ctrla = MICRON_V_ACTIMA_165;
>> - timings->ctrlb = MICRON_V_ACTIMB_165;
>> - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
>> - }
>> -}
>> diff --git a/configs/omap3_overo_defconfig b/configs/omap3_overo_defconfig
>> deleted file mode 100644
>> index 1e7e5f7d835..00000000000
>> --- a/configs/omap3_overo_defconfig
>> +++ /dev/null
>> @@ -1,51 +0,0 @@
>> -CONFIG_ARM=y
>> -CONFIG_ARCH_OMAP2PLUS=y
>> -CONFIG_SYS_MALLOC_F_LEN=0x2000
>> -CONFIG_TARGET_OMAP3_OVERO=y
>> -CONFIG_SPL=y
>> -CONFIG_DISTRO_DEFAULTS=y
>> -CONFIG_NR_DRAM_BANKS=2
>> -# CONFIG_USE_BOOTCOMMAND is not set
>> -CONFIG_SYS_CONSOLE_INFO_QUIET=y
>> -CONFIG_VERSION_VARIABLE=y
>> -CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>> -CONFIG_SPL_MTD_SUPPORT=y
>> -CONFIG_SPL_OS_BOOT=y
>> -CONFIG_SYS_PROMPT="Overo # "
>> -# CONFIG_CMD_IMI is not set
>> -CONFIG_CMD_SPL=y
>> -CONFIG_CMD_SPL_NAND_OFS=0x240000
>> -CONFIG_CMD_ASKENV=y
>> -# CONFIG_CMD_FLASH is not set
>> -CONFIG_CMD_GPIO=y
>> -CONFIG_CMD_I2C=y
>> -CONFIG_CMD_MMC=y
>> -CONFIG_CMD_NAND=y
>> -CONFIG_CMD_SPI=y
>> -CONFIG_CMD_USB=y
>> -# CONFIG_CMD_SETEXPR is not set
>> -# CONFIG_CMD_NFS is not set
>> -CONFIG_CMD_CACHE=y
>> -CONFIG_CMD_EXT4_WRITE=y
>> -CONFIG_CMD_MTDPARTS=y
>> -CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
>>
>> -CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader),1792k(u-boot),256k(environ),8m(linux),-(rootfs)"
>> -CONFIG_CMD_UBI=y
>> -CONFIG_ENV_IS_IN_NAND=y
>> -CONFIG_TWL4030_LED=y
>> -CONFIG_MMC_OMAP_HS=y
>> -CONFIG_NAND=y
>> -CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
>> -CONFIG_SPL_NAND_SIMPLE=y
>> -CONFIG_SMC911X=y
>> -CONFIG_SMC911X_BASE=0x2C000000
>> -CONFIG_SMC911X_32_BIT=y
>> -CONFIG_CONS_INDEX=3
>> -CONFIG_SPI=y
>> -CONFIG_OMAP3_SPI=y
>> -CONFIG_USB=y
>> -CONFIG_USB_EHCI_HCD=y
>> -CONFIG_USB_STORAGE=y
>> -CONFIG_FAT_WRITE=y
>> -CONFIG_BCH=y
>> -CONFIG_OF_LIBFDT=y
>> diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
>> deleted file mode 100644
>> index 35f3af4ae9a..00000000000
>> --- a/include/configs/omap3_overo.h
>> +++ /dev/null
>> @@ -1,192 +0,0 @@
>> -/* SPDX-License-Identifier: GPL-2.0+ */
>> -/*
>> - * Configuration settings for the Gumstix Overo board.
>> - */
>> -
>> -#ifndef __CONFIG_H
>> -#define __CONFIG_H
>> -
>> -#include <configs/ti_omap3_common.h>
>> -/*
>> - * We are only ever GP parts and will utilize all of the "downloaded
>> image"
>> - * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
>> - */
>> -#undef CONFIG_SPL_TEXT_BASE
>> -#define CONFIG_SPL_TEXT_BASE 0x40200000
>> -
>> -/* call misc_init_r */
>> -
>> -/* pass the revision tag */
>> -#define CONFIG_REVISION_TAG
>> -
>> -/* override size of malloc() pool */
>> -#undef CONFIG_SYS_MALLOC_LEN
>> -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector
>> */
>> -/* Shift 128 << 15 provides 4 MiB heap to support UBI commands.
>> - * Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */
>> -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 15))
>> -
>> -/* I2C Support */
>> -
>> -/* TWL4030 LED */
>> -
>> -/* USB EHCI */
>> -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183
>> -
>> -/* commands to include */
>> -
>> -#ifdef CONFIG_NAND
>> -/* NAND block size is 128 KiB. Synchronize these values with
>> - * overo_nand_partitions in mach-omap2/board-overo.c in Linux:
>> - * xloader 4 * NAND_BLOCK_SIZE = 512 KiB
>> - * uboot 14 * NAND_BLOCK_SIZE = 1792 KiB
>> - * uboot environtment 2 * NAND_BLOCK_SIZE = 256 KiB
>> - * linux 64 * NAND_BLOCK_SIZE = 8 MiB
>> - * rootfs remainder
>> - */
>> -#endif /* CONFIG_NAND */
>> -
>> -/* Board NAND Info. */
>> -/* Environment information */
>> -#define CONFIG_EXTRA_ENV_SETTINGS \
>> - DEFAULT_LINUX_BOOT_ENV \
>> - "bootdir=/boot\0" \
>> - "bootfile=zImage\0" \
>> - "usbtty=cdc_acm\0" \
>> - "console=ttyO2,115200n8\0" \
>> - "mpurate=auto\0" \
>> - "optargs=\0" \
>> - "vram=12M\0" \
>> - "dvimode=1024x768MR-16 at 60\0" \
>> - "defaultdisplay=dvi\0" \
>> - "mmcdev=0\0" \
>> - "mmcroot=/dev/mmcblk0p2 rw\0" \
>> - "mmcrootfstype=ext4 rootwait\0" \
>> - "nandroot=ubi0:rootfs ubi.mtd=4\0" \
>> - "nandrootfstype=ubifs\0" \
>> - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
>> - "mmcargs=setenv bootargs console=${console} " \
>> - "${optargs} " \
>> - "mpurate=${mpurate} " \
>> - "vram=${vram} " \
>> - "omapfb.mode=dvi:${dvimode} " \
>> - "omapdss.def_disp=${defaultdisplay} " \
>> - "root=${mmcroot} " \
>> - "rootfstype=${mmcrootfstype}\0" \
>> - "nandargs=setenv bootargs console=${console} " \
>> - "${optargs} " \
>> - "mpurate=${mpurate} " \
>> - "vram=${vram} " \
>> - "omapfb.mode=dvi:${dvimode} " \
>> - "omapdss.def_disp=${defaultdisplay} " \
>> - "root=${nandroot} " \
>> - "rootfstype=${nandrootfstype}\0" \
>> - "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
>> - "bootscript=echo Running boot script from mmc ...; " \
>> - "source ${loadaddr}\0" \
>> - "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
>> - "importbootenv=echo Importing environment from mmc ...; " \
>> - "env import -t ${loadaddr} ${filesize}\0" \
>> - "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
>> - "mmcboot=echo Booting from mmc...; " \
>> - "run mmcargs; " \
>> - "bootm ${loadaddr}\0" \
>> - "loadzimage=load mmc ${mmcdev}:2 ${loadaddr}
>> ${bootdir}/${bootfile}\0" \
>> - "loadfdt=load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0"
>> \
>> - "loadubizimage=ubifsload ${loadaddr} ${bootdir}/${bootfile}\0" \
>> - "loadubifdt=ubifsload ${fdtaddr} ${bootdir}/${fdtfile}\0" \
>> - "mmcbootfdt=echo Booting with DT from mmc ...; " \
>> - "run mmcargs; " \
>> - "bootz ${loadaddr} - ${fdtaddr}\0" \
>> - "nandboot=echo Booting from nand ...; " \
>> - "run nandargs; " \
>> - "if nand read ${loadaddr} linux; then " \
>> - "bootm ${loadaddr};" \
>> - "fi;\0" \
>> - "nanddtsboot=echo Booting from nand with DTS...; " \
>> - "run nandargs; " \
>> - "ubi part rootfs; "\
>> - "ubifsmount ubi0:rootfs; "\
>> - "run loadubifdt; "\
>> - "run loadubizimage; "\
>> - "bootz ${loadaddr} - ${fdtaddr}\0" \
>> -
>> -#define CONFIG_BOOTCOMMAND \
>> - "mmc dev ${mmcdev}; if mmc rescan; then " \
>> - "if run loadbootscript; then " \
>> - "run bootscript; " \
>> - "fi;" \
>> - "if run loadbootenv; then " \
>> - "echo Loaded environment from ${bootenv};" \
>> - "run importbootenv;" \
>> - "fi;" \
>> - "if test -n $uenvcmd; then " \
>> - "echo Running uenvcmd ...;" \
>> - "run uenvcmd;" \
>> - "fi;" \
>> - "if run loaduimage; then " \
>> - "run mmcboot;" \
>> - "fi;" \
>> - "if run loadzimage; then " \
>> - "if test -z \"${fdtfile}\"; then " \
>> - "setenv fdtfile
>> omap3-${boardname}-${expansionname}.dtb;" \
>> - "fi;" \
>> - "if run loadfdt; then " \
>> - "run mmcbootfdt;" \
>> - "fi;" \
>> - "fi;" \
>> - "fi;" \
>> - "run nandboot; " \
>> - "if test -z \"${fdtfile}\"; then "\
>> - "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;"
>> \
>> - "fi;" \
>> - "run nanddtsboot; " \
>> -
>> -/* memtest works on */
>> -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
>> -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
>> - 0x01F00000) /* 31MB */
>> -
>> -/* FLASH and environment organization */
>> -#if defined(CONFIG_NAND)
>> -#define CONFIG_SYS_FLASH_BASE NAND_BASE
>> -#endif
>> -
>> -/* Monitor at start of flash */
>> -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
>> -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
>> -
>> -#define ONENAND_ENV_OFFSET 0x240000 /* environment starts
>> here */
>> -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
>> -#define CONFIG_ENV_OFFSET 0x240000
>> -#define CONFIG_ENV_ADDR 0x240000
>> -
>> -/* Initial RAM setup */
>> -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
>> -#define CONFIG_SYS_INIT_RAM_SIZE 0x800
>> -
>> -/* NAND boot config */
>> -#define CONFIG_SYS_NAND_MAX_ECCPOS 56
>> -#define CONFIG_SYS_NAND_5_ADDR_CYCLE
>> -#define CONFIG_SYS_NAND_PAGE_COUNT 64
>> -#define CONFIG_SYS_NAND_PAGE_SIZE 2048
>> -#define CONFIG_SYS_NAND_OOBSIZE 64
>> -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
>> -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
>> -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
>> \
>> - 13, 14, 16, 17, 18, 19, 20, 21,
>> 22, \
>> - 23, 24, 25, 26, 27, 28, 30, 31,
>> 32, \
>> - 33, 34, 35, 36, 37, 38, 39, 40,
>> 41, \
>> - 42, 44, 45, 46, 47, 48, 49, 50,
>> 51, \
>> - 52, 53, 54, 55, 56}
>> -#define CONFIG_SYS_NAND_ECCSIZE 512
>> -#define CONFIG_SYS_NAND_ECCBYTES 13
>> -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
>> -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
>> -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
>> -/* NAND: SPL falcon mode configs */
>> -#ifdef CONFIG_SPL_OS_BOOT
>> -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
>> -#endif
>> -
>> -#endif /* __CONFIG_H */
>> --
>> 2.19.1.1215.g8438c0b245-goog
>>
>
More information about the U-Boot
mailing list