[U-Boot] [PATCH v2 0/5] Submit upstream changes made while porting a customer board to mainline

[Otavio Salvador]

Those changes are intended to easy the process of using U-Boot
mainline with rv1108 based boards.

Please give them a good review and if possible, merge them as they are
in use for some time on our custom tree and working fine.

Changes in v2:
- new patch
- split bounce buffer change on a new patch

Otavio Salvador (5):
  clk_rv1108: Sync with vendor tree
  rv1108: Enable BOUNCE_BUFFER
  rv1108: Enable eMMC support
  rv1108: Make USB OTG functional
  rv1108: Add support for default distro_bootcmd

 arch/arm/dts/rv1108.dtsi                      |  74 ++-
 .../include/asm/arch-rockchip/cru_rv1108.h    | 143 +++++-
 arch/arm/mach-rockchip/Makefile               |   1 +
 arch/arm/mach-rockchip/rv1108-board.c         |  81 ++++
 drivers/clk/rockchip/clk_rv1108.c             | 457 +++++++++++++++++-
 include/configs/rv1108_common.h               |  18 +
 include/dt-bindings/clock/rv1108-cru.h        | 154 ++++--
 7 files changed, 877 insertions(+), 51 deletions(-)
 create mode 100644 arch/arm/mach-rockchip/rv1108-board.c

-- 
2.19.1