[U-Boot] [PATCH u-boot 13/19] ARM: meson: rework soc arch file to prepare for new SoC
Loic Devulder
ldevulder at suse.de
Tue Nov 20 21:11:01 UTC 2018
Hi Neil,
On 11/9/18 4:26 PM, Neil Armstrong wrote:
> From: Jerome Brunet <jbrunet at baylibre.com>
>
> We are about to add support for the Amlogic AXG SoC. While very close to
> the Gx SoC family, we will need to handle a few thing which are different
> in this SoC. Rework the meson arch directory to prepare for this.
>
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> arch/arm/include/asm/arch-meson/clock-gx.h | 117 +++++++++++++++++++++++++
> arch/arm/include/asm/arch-meson/clock.h | 117 -------------------------
> arch/arm/include/asm/arch-meson/eth.h | 6 +-
> arch/arm/include/asm/arch-meson/mem.h | 3 +-
> arch/arm/mach-meson/Kconfig | 10 ++-
> arch/arm/mach-meson/Makefile | 3 +-
> arch/arm/mach-meson/board-common.c | 56 ++++++++++++
> arch/arm/mach-meson/board-gx.c | 132 +++++++++++++++++++++++++++++
> arch/arm/mach-meson/board.c | 130 ----------------------------
> arch/arm/mach-meson/eth.c | 53 ------------
> arch/arm/mach-meson/sm.c | 1 -
> board/amlogic/odroid-c2/odroid-c2.c | 6 +-
> board/amlogic/p212/p212.c | 6 +-
> board/amlogic/q200/q200.c | 4 +-
> drivers/clk/clk_meson.c | 2 +-
> 15 files changed, 328 insertions(+), 318 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-meson/clock-gx.h
> delete mode 100644 arch/arm/include/asm/arch-meson/clock.h
> create mode 100644 arch/arm/mach-meson/board-common.c
> create mode 100644 arch/arm/mach-meson/board-gx.c
> delete mode 100644 arch/arm/mach-meson/board.c
> delete mode 100644 arch/arm/mach-meson/eth.c
>
> diff --git a/arch/arm/include/asm/arch-meson/clock-gx.h b/arch/arm/include/asm/arch-meson/clock-gx.h
> new file mode 100644
> index 0000000..13a2e76
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-meson/clock-gx.h
> @@ -0,0 +1,117 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2016 - AmLogic, Inc.
> + * Copyright 2018 - Beniamino Galvani <b.galvani at gmail.com>
> + */
> +#ifndef _ARCH_MESON_CLOCK_GX_H_
> +#define _ARCH_MESON_CLOCK_GX_H_
> +
> +/*
> + * Clock controller register offsets
> + *
> + * Register offsets from the data sheet are listed in comment blocks below.
> + * Those offsets must be multiplied by 4 before adding them to the base address
> + * to get the right value
> + */
> +#define SCR 0x2C /* 0x0b offset in data sheet */
> +#define TIMEOUT_VALUE 0x3c /* 0x0f offset in data sheet */
> +
> +#define HHI_GP0_PLL_CNTL 0x40 /* 0x10 offset in data sheet */
> +#define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */
> +#define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */
> +#define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */
> +#define HHI_GP0_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */
> +#define HHI_GP0_PLL_CNTL1 0x58 /* 0x16 offset in data sheet */
> +
> +#define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */
> +#define HHI_TIMER90K 0xec /* 0x3b offset in data sheet */
> +
> +#define HHI_MEM_PD_REG0 0x100 /* 0x40 offset in data sheet */
> +#define HHI_MEM_PD_REG1 0x104 /* 0x41 offset in data sheet */
> +#define HHI_VPU_MEM_PD_REG1 0x108 /* 0x42 offset in data sheet */
> +#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */
> +#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
> +
> +#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */
> +#define HHI_GCLK_MPEG1 0x144 /* 0x51 offset in data sheet */
> +#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */
> +#define HHI_GCLK_OTHER 0x150 /* 0x54 offset in data sheet */
> +#define HHI_GCLK_AO 0x154 /* 0x55 offset in data sheet */
> +#define HHI_SYS_OSCIN_CNTL 0x158 /* 0x56 offset in data sheet */
> +#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */
> +#define HHI_SYS_CPU_RESET_CNTL 0x160 /* 0x58 offset in data sheet */
> +#define HHI_VID_CLK_DIV 0x164 /* 0x59 offset in data sheet */
> +
> +#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */
> +#define HHI_AUD_CLK_CNTL 0x178 /* 0x5e offset in data sheet */
> +#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */
> +#define HHI_AUD_CLK_CNTL2 0x190 /* 0x64 offset in data sheet */
> +#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
> +#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */
> +#define HHI_VID_PLL_CLK_DIV 0x1a0 /* 0x68 offset in data sheet */
> +#define HHI_AUD_CLK_CNTL3 0x1a4 /* 0x69 offset in data sheet */
> +#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */
> +#define HHI_VPU_CLK_CNTL 0x1bC /* 0x6f offset in data sheet */
> +
> +#define HHI_HDMI_CLK_CNTL 0x1CC /* 0x73 offset in data sheet */
> +#define HHI_VDEC_CLK_CNTL 0x1E0 /* 0x78 offset in data sheet */
> +#define HHI_VDEC2_CLK_CNTL 0x1E4 /* 0x79 offset in data sheet */
> +#define HHI_VDEC3_CLK_CNTL 0x1E8 /* 0x7a offset in data sheet */
> +#define HHI_VDEC4_CLK_CNTL 0x1EC /* 0x7b offset in data sheet */
> +#define HHI_HDCP22_CLK_CNTL 0x1F0 /* 0x7c offset in data sheet */
> +#define HHI_VAPBCLK_CNTL 0x1F4 /* 0x7d offset in data sheet */
> +
> +#define HHI_VPU_CLKB_CNTL 0x20C /* 0x83 offset in data sheet */
> +#define HHI_USB_CLK_CNTL 0x220 /* 0x88 offset in data sheet */
> +#define HHI_32K_CLK_CNTL 0x224 /* 0x89 offset in data sheet */
> +#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */
> +#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */
> +
> +#define HHI_PCM_CLK_CNTL 0x258 /* 0x96 offset in data sheet */
> +#define HHI_NAND_CLK_CNTL 0x25C /* 0x97 offset in data sheet */
> +#define HHI_SD_EMMC_CLK_CNTL 0x264 /* 0x99 offset in data sheet */
> +
> +#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
> +#define HHI_MPLL_CNTL2 0x284 /* 0xa1 offset in data sheet */
> +#define HHI_MPLL_CNTL3 0x288 /* 0xa2 offset in data sheet */
> +#define HHI_MPLL_CNTL4 0x28C /* 0xa3 offset in data sheet */
> +#define HHI_MPLL_CNTL5 0x290 /* 0xa4 offset in data sheet */
> +#define HHI_MPLL_CNTL6 0x294 /* 0xa5 offset in data sheet */
> +#define HHI_MPLL_CNTL7 0x298 /* 0xa6 offset in data sheet */
> +#define HHI_MPLL_CNTL8 0x29C /* 0xa7 offset in data sheet */
> +#define HHI_MPLL_CNTL9 0x2A0 /* 0xa8 offset in data sheet */
> +#define HHI_MPLL_CNTL10 0x2A4 /* 0xa9 offset in data sheet */
> +
> +#define HHI_MPLL3_CNTL0 0x2E0 /* 0xb8 offset in data sheet */
> +#define HHI_MPLL3_CNTL1 0x2E4 /* 0xb9 offset in data sheet */
> +#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */
> +#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */
> +
> +#define HHI_SYS_PLL_CNTL 0x300 /* 0xc0 offset in data sheet */
> +#define HHI_SYS_PLL_CNTL2 0x304 /* 0xc1 offset in data sheet */
> +#define HHI_SYS_PLL_CNTL3 0x308 /* 0xc2 offset in data sheet */
> +#define HHI_SYS_PLL_CNTL4 0x30c /* 0xc3 offset in data sheet */
> +#define HHI_SYS_PLL_CNTL5 0x310 /* 0xc4 offset in data sheet */
> +#define HHI_DPLL_TOP_I 0x318 /* 0xc6 offset in data sheet */
> +#define HHI_DPLL_TOP2_I 0x31C /* 0xc7 offset in data sheet */
> +#define HHI_HDMI_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */
> +#define HHI_HDMI_PLL_CNTL2 0x324 /* 0xc9 offset in data sheet */
> +#define HHI_HDMI_PLL_CNTL3 0x328 /* 0xca offset in data sheet */
> +#define HHI_HDMI_PLL_CNTL4 0x32C /* 0xcb offset in data sheet */
> +#define HHI_HDMI_PLL_CNTL5 0x330 /* 0xcc offset in data sheet */
> +#define HHI_HDMI_PLL_CNTL6 0x334 /* 0xcd offset in data sheet */
> +#define HHI_HDMI_PLL_CNTL_I 0x338 /* 0xce offset in data sheet */
> +#define HHI_HDMI_PLL_CNTL7 0x33C /* 0xcf offset in data sheet */
> +
> +#define HHI_HDMI_PHY_CNTL0 0x3A0 /* 0xe8 offset in data sheet */
> +#define HHI_HDMI_PHY_CNTL1 0x3A4 /* 0xe9 offset in data sheet */
> +#define HHI_HDMI_PHY_CNTL2 0x3A8 /* 0xea offset in data sheet */
> +#define HHI_HDMI_PHY_CNTL3 0x3AC /* 0xeb offset in data sheet */
> +
> +#define HHI_VID_LOCK_CLK_CNTL 0x3C8 /* 0xf2 offset in data sheet */
> +#define HHI_BT656_CLK_CNTL 0x3D4 /* 0xf5 offset in data sheet */
> +#define HHI_SAR_CLK_CNTL 0x3D8 /* 0xf6 offset in data sheet */
> +
> +ulong meson_measure_clk_rate(unsigned int clk);
> +
> +#endif
> diff --git a/arch/arm/include/asm/arch-meson/clock.h b/arch/arm/include/asm/arch-meson/clock.h
> deleted file mode 100644
> index c0ff00f..0000000
> --- a/arch/arm/include/asm/arch-meson/clock.h
> +++ /dev/null
> @@ -1,117 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * Copyright 2016 - AmLogic, Inc.
> - * Copyright 2018 - Beniamino Galvani <b.galvani at gmail.com>
> - */
> -#ifndef _ARCH_MESON_CLOCK_H_
> -#define _ARCH_MESON_CLOCK_H_
> -
> -/*
> - * Clock controller register offsets
> - *
> - * Register offsets from the data sheet are listed in comment blocks below.
> - * Those offsets must be multiplied by 4 before adding them to the base address
> - * to get the right value
> - */
> -#define SCR 0x2C /* 0x0b offset in data sheet */
> -#define TIMEOUT_VALUE 0x3c /* 0x0f offset in data sheet */
> -
> -#define HHI_GP0_PLL_CNTL 0x40 /* 0x10 offset in data sheet */
> -#define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */
> -#define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */
> -#define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */
> -#define HHI_GP0_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */
> -#define HHI_GP0_PLL_CNTL1 0x58 /* 0x16 offset in data sheet */
> -
> -#define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */
> -#define HHI_TIMER90K 0xec /* 0x3b offset in data sheet */
> -
> -#define HHI_MEM_PD_REG0 0x100 /* 0x40 offset in data sheet */
> -#define HHI_MEM_PD_REG1 0x104 /* 0x41 offset in data sheet */
> -#define HHI_VPU_MEM_PD_REG1 0x108 /* 0x42 offset in data sheet */
> -#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */
> -#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
> -
> -#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */
> -#define HHI_GCLK_MPEG1 0x144 /* 0x51 offset in data sheet */
> -#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */
> -#define HHI_GCLK_OTHER 0x150 /* 0x54 offset in data sheet */
> -#define HHI_GCLK_AO 0x154 /* 0x55 offset in data sheet */
> -#define HHI_SYS_OSCIN_CNTL 0x158 /* 0x56 offset in data sheet */
> -#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */
> -#define HHI_SYS_CPU_RESET_CNTL 0x160 /* 0x58 offset in data sheet */
> -#define HHI_VID_CLK_DIV 0x164 /* 0x59 offset in data sheet */
> -
> -#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */
> -#define HHI_AUD_CLK_CNTL 0x178 /* 0x5e offset in data sheet */
> -#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */
> -#define HHI_AUD_CLK_CNTL2 0x190 /* 0x64 offset in data sheet */
> -#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
> -#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */
> -#define HHI_VID_PLL_CLK_DIV 0x1a0 /* 0x68 offset in data sheet */
> -#define HHI_AUD_CLK_CNTL3 0x1a4 /* 0x69 offset in data sheet */
> -#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */
> -#define HHI_VPU_CLK_CNTL 0x1bC /* 0x6f offset in data sheet */
> -
> -#define HHI_HDMI_CLK_CNTL 0x1CC /* 0x73 offset in data sheet */
> -#define HHI_VDEC_CLK_CNTL 0x1E0 /* 0x78 offset in data sheet */
> -#define HHI_VDEC2_CLK_CNTL 0x1E4 /* 0x79 offset in data sheet */
> -#define HHI_VDEC3_CLK_CNTL 0x1E8 /* 0x7a offset in data sheet */
> -#define HHI_VDEC4_CLK_CNTL 0x1EC /* 0x7b offset in data sheet */
> -#define HHI_HDCP22_CLK_CNTL 0x1F0 /* 0x7c offset in data sheet */
> -#define HHI_VAPBCLK_CNTL 0x1F4 /* 0x7d offset in data sheet */
> -
> -#define HHI_VPU_CLKB_CNTL 0x20C /* 0x83 offset in data sheet */
> -#define HHI_USB_CLK_CNTL 0x220 /* 0x88 offset in data sheet */
> -#define HHI_32K_CLK_CNTL 0x224 /* 0x89 offset in data sheet */
> -#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */
> -#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */
> -
> -#define HHI_PCM_CLK_CNTL 0x258 /* 0x96 offset in data sheet */
> -#define HHI_NAND_CLK_CNTL 0x25C /* 0x97 offset in data sheet */
> -#define HHI_SD_EMMC_CLK_CNTL 0x264 /* 0x99 offset in data sheet */
> -
> -#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
> -#define HHI_MPLL_CNTL2 0x284 /* 0xa1 offset in data sheet */
> -#define HHI_MPLL_CNTL3 0x288 /* 0xa2 offset in data sheet */
> -#define HHI_MPLL_CNTL4 0x28C /* 0xa3 offset in data sheet */
> -#define HHI_MPLL_CNTL5 0x290 /* 0xa4 offset in data sheet */
> -#define HHI_MPLL_CNTL6 0x294 /* 0xa5 offset in data sheet */
> -#define HHI_MPLL_CNTL7 0x298 /* 0xa6 offset in data sheet */
> -#define HHI_MPLL_CNTL8 0x29C /* 0xa7 offset in data sheet */
> -#define HHI_MPLL_CNTL9 0x2A0 /* 0xa8 offset in data sheet */
> -#define HHI_MPLL_CNTL10 0x2A4 /* 0xa9 offset in data sheet */
> -
> -#define HHI_MPLL3_CNTL0 0x2E0 /* 0xb8 offset in data sheet */
> -#define HHI_MPLL3_CNTL1 0x2E4 /* 0xb9 offset in data sheet */
> -#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */
> -#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */
> -
> -#define HHI_SYS_PLL_CNTL 0x300 /* 0xc0 offset in data sheet */
> -#define HHI_SYS_PLL_CNTL2 0x304 /* 0xc1 offset in data sheet */
> -#define HHI_SYS_PLL_CNTL3 0x308 /* 0xc2 offset in data sheet */
> -#define HHI_SYS_PLL_CNTL4 0x30c /* 0xc3 offset in data sheet */
> -#define HHI_SYS_PLL_CNTL5 0x310 /* 0xc4 offset in data sheet */
> -#define HHI_DPLL_TOP_I 0x318 /* 0xc6 offset in data sheet */
> -#define HHI_DPLL_TOP2_I 0x31C /* 0xc7 offset in data sheet */
> -#define HHI_HDMI_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */
> -#define HHI_HDMI_PLL_CNTL2 0x324 /* 0xc9 offset in data sheet */
> -#define HHI_HDMI_PLL_CNTL3 0x328 /* 0xca offset in data sheet */
> -#define HHI_HDMI_PLL_CNTL4 0x32C /* 0xcb offset in data sheet */
> -#define HHI_HDMI_PLL_CNTL5 0x330 /* 0xcc offset in data sheet */
> -#define HHI_HDMI_PLL_CNTL6 0x334 /* 0xcd offset in data sheet */
> -#define HHI_HDMI_PLL_CNTL_I 0x338 /* 0xce offset in data sheet */
> -#define HHI_HDMI_PLL_CNTL7 0x33C /* 0xcf offset in data sheet */
> -
> -#define HHI_HDMI_PHY_CNTL0 0x3A0 /* 0xe8 offset in data sheet */
> -#define HHI_HDMI_PHY_CNTL1 0x3A4 /* 0xe9 offset in data sheet */
> -#define HHI_HDMI_PHY_CNTL2 0x3A8 /* 0xea offset in data sheet */
> -#define HHI_HDMI_PHY_CNTL3 0x3AC /* 0xeb offset in data sheet */
> -
> -#define HHI_VID_LOCK_CLK_CNTL 0x3C8 /* 0xf2 offset in data sheet */
> -#define HHI_BT656_CLK_CNTL 0x3D4 /* 0xf5 offset in data sheet */
> -#define HHI_SAR_CLK_CNTL 0x3D8 /* 0xf6 offset in data sheet */
> -
> -ulong meson_measure_clk_rate(unsigned int clk);
> -
> -#endif
> diff --git a/arch/arm/include/asm/arch-meson/eth.h b/arch/arm/include/asm/arch-meson/eth.h
> index 1aa0872..08acc5c 100644
> --- a/arch/arm/include/asm/arch-meson/eth.h
> +++ b/arch/arm/include/asm/arch-meson/eth.h
> @@ -10,13 +10,13 @@
> #include <phy.h>
>
> enum {
> - /* Use GXL Internal RMII PHY */
> - MESON_GXL_USE_INTERNAL_RMII_PHY = 1,
> + /* Use Internal RMII PHY */
> + MESON_USE_INTERNAL_RMII_PHY = 1,
> };
>
> /* Configure the Ethernet MAC with the requested interface mode
> * with some optional flags.
> */
> -void meson_gx_eth_init(phy_interface_t mode, unsigned int flags);
> +void meson_eth_init(phy_interface_t mode, unsigned int flags);
>
> #endif /* __MESON_ETH_H__ */
> diff --git a/arch/arm/include/asm/arch-meson/mem.h b/arch/arm/include/asm/arch-meson/mem.h
> index 6281833..a65100a 100644
> --- a/arch/arm/include/asm/arch-meson/mem.h
> +++ b/arch/arm/include/asm/arch-meson/mem.h
> @@ -10,6 +10,7 @@
> /* Configure the reserved memory zones exported by the secure registers
> * into EFI and DTB reserved memory entries.
> */
> -void meson_gx_init_reserved_memory(void *fdt);
> +void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size);
> +void meson_init_reserved_memory(void *fdt);
>
> #endif /* __MESON_MEM_H__ */
> diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
> index 6f60167..6225417 100644
> --- a/arch/arm/mach-meson/Kconfig
> +++ b/arch/arm/mach-meson/Kconfig
> @@ -8,25 +8,29 @@ config MESON64_COMMON
> select DM_SERIAL
> imply CMD_DM
>
> +config MESON_GX
> + bool
> + select MESON64_COMMON
> +
> choice
> prompt "Platform select"
> default MESON_GXBB
>
> config MESON_GXBB
> bool "GXBB"
> - select MESON64_COMMON
> + select MESON_GX
> help
> Select this if your SoC is an S905
>
> config MESON_GXL
> bool "GXL"
> - select MESON64_COMMON
> + select MESON_GX
> help
> Select this if your SoC is an S905X/D or S805X
>
> config MESON_GXM
> bool "GXM"
> - select MESON64_COMMON
> + select MESON_GX
> help
> Select this if your SoC is an S912
>
> diff --git a/arch/arm/mach-meson/Makefile b/arch/arm/mach-meson/Makefile
> index 8ad9b3e..78345b4 100644
> --- a/arch/arm/mach-meson/Makefile
> +++ b/arch/arm/mach-meson/Makefile
> @@ -2,4 +2,5 @@
> #
> # Copyright (c) 2016 Beniamino Galvani <b.galvani at gmail.com>
>
> -obj-y += board.o sm.o eth.o
> +obj-y += board-common.o sm.o
> +obj-$(CONFIG_MESON_GX) += board-gx.o
> diff --git a/arch/arm/mach-meson/board-common.c b/arch/arm/mach-meson/board-common.c
> new file mode 100644
> index 0000000..0446507
> --- /dev/null
> +++ b/arch/arm/mach-meson/board-common.c
> @@ -0,0 +1,56 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2016 Beniamino Galvani <b.galvani at gmail.com>
> + */
> +
> +#include <common.h>
> +#include <linux/libfdt.h>
> +#include <linux/err.h>
> +#include <asm/arch/mem.h>
> +#include <asm/arch/sm.h>
> +#include <asm/armv8/mmu.h>
> +#include <asm/unaligned.h>
> +#include <efi_loader.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int dram_init(void)
> +{
> + const fdt64_t *val;
> + int offset;
> + int len;
> +
> + offset = fdt_path_offset(gd->fdt_blob, "/memory");
> + if (offset < 0)
> + return -EINVAL;
> +
> + val = fdt_getprop(gd->fdt_blob, offset, "reg", &len);
> + if (len < sizeof(*val) * 2)
> + return -EINVAL;
> +
> + /* Use unaligned access since cache is still disabled */
> + gd->ram_size = get_unaligned_be64(&val[1]);
> +
> + return 0;
> +}
> +
> +void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size)
> +{
> + int ret;
> +
> + ret = fdt_add_mem_rsv(fdt, start, size);
> + if (ret)
> + printf("Could not reserve zone @ 0x%llx\n", start);
> +
> + if (IS_ENABLED(CONFIG_EFI_LOADER)) {
> + efi_add_memory_map(start,
> + ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT,
> + EFI_RESERVED_MEMORY_TYPE, false);
> + }
> +}
> +
> +void reset_cpu(ulong addr)
> +{
> + psci_system_reset();
> +}
> +
Also a small warning because of this blank line at EOF.
> diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c
> new file mode 100644
> index 0000000..f1397f8
> --- /dev/null
> +++ b/arch/arm/mach-meson/board-gx.c
> @@ -0,0 +1,132 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2016 Beniamino Galvani <b.galvani at gmail.com>
> + * (C) Copyright 2018 Neil Armstrong <narmstrong at baylibre.com>
> + */
> +
> +#include <common.h>
> +#include <asm/arch/eth.h>
> +#include <asm/arch/gx.h>
> +#include <asm/arch/mem.h>
> +#include <asm/io.h>
> +#include <asm/armv8/mmu.h>
> +#include <linux/sizes.h>
> +#include <phy.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/* Configure the reserved memory zones exported by the secure registers
> + * into EFI and DTB reserved memory entries.
> + */
> +void meson_init_reserved_memory(void *fdt)
> +{
> + u64 bl31_size, bl31_start;
> + u64 bl32_size, bl32_start;
> + u32 reg;
> +
> + /*
> + * Get ARM Trusted Firmware reserved memory zones in :
> + * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0
> + * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL
> + * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
> + */
> + reg = readl(GX_AO_SEC_GP_CFG3);
> +
> + bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK)
> + >> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
> + bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
> +
> + bl31_start = readl(GX_AO_SEC_GP_CFG5);
> + bl32_start = readl(GX_AO_SEC_GP_CFG4);
> +
> + /*
> + * Early Meson GX Firmware revisions did not provide the reserved
> + * memory zones in the registers, keep fixed memory zone handling.
> + */
> + if (IS_ENABLED(CONFIG_MESON_GX) &&
> + !reg && !bl31_start && !bl32_start) {
> + bl31_start = 0x10000000;
> + bl31_size = 0x200000;
> + }
> +
> + /* Add first 16MiB reserved zone */
> + meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE);
> +
> + /* Add BL31 reserved zone */
> + if (bl31_start && bl31_size)
> + meson_board_add_reserved_memory(fdt, bl31_start, bl31_size);
> +
> + /* Add BL32 reserved zone */
> + if (bl32_start && bl32_size)
> + meson_board_add_reserved_memory(fdt, bl32_start, bl32_size);
> +}
> +
> +phys_size_t get_effective_memsize(void)
> +{
> + /* Size is reported in MiB, convert it in bytes */
> + return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK)
> + >> GX_AO_MEM_SIZE_SHIFT) * SZ_1M;
> +}
> +
> +static struct mm_region gx_mem_map[] = {
> + {
> + .virt = 0x0UL,
> + .phys = 0x0UL,
> + .size = 0xc0000000UL,
> + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> + PTE_BLOCK_INNER_SHARE
> + }, {
> + .virt = 0xc0000000UL,
> + .phys = 0xc0000000UL,
> + .size = 0x30000000UL,
> + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> + PTE_BLOCK_NON_SHARE |
> + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> + }, {
> + /* List terminator */
> + 0,
> + }
> +};
> +
> +struct mm_region *mem_map = gx_mem_map;
> +
> +/* Configure the Ethernet MAC with the requested interface mode
> + * with some optional flags.
> + */
> +void meson_eth_init(phy_interface_t mode, unsigned int flags)
> +{
> + switch (mode) {
> + case PHY_INTERFACE_MODE_RGMII:
> + case PHY_INTERFACE_MODE_RGMII_ID:
> + case PHY_INTERFACE_MODE_RGMII_RXID:
> + case PHY_INTERFACE_MODE_RGMII_TXID:
> + /* Set RGMII mode */
> + setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
> + GX_ETH_REG_0_TX_PHASE(1) |
> + GX_ETH_REG_0_TX_RATIO(4) |
> + GX_ETH_REG_0_PHY_CLK_EN |
> + GX_ETH_REG_0_CLK_EN);
> + break;
> +
> + case PHY_INTERFACE_MODE_RMII:
> + /* Set RMII mode */
> + out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
> + GX_ETH_REG_0_CLK_EN);
> +
> + /* Use GXL RMII Internal PHY */
> + if (IS_ENABLED(CONFIG_MESON_GXL) &&
> + (flags & MESON_USE_INTERNAL_RMII_PHY)) {
> + writel(0x10110181, GX_ETH_REG_2);
> + writel(0xe40908ff, GX_ETH_REG_3);
> + }
> +
> + break;
> +
> + default:
> + printf("Invalid Ethernet interface mode\n");
> + return;
> + }
> +
> + /* Enable power gate */
> + clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
> +}
> diff --git a/arch/arm/mach-meson/board.c b/arch/arm/mach-meson/board.c
> deleted file mode 100644
> index d6c6253..0000000
> --- a/arch/arm/mach-meson/board.c
> +++ /dev/null
> @@ -1,130 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * (C) Copyright 2016 Beniamino Galvani <b.galvani at gmail.com>
> - */
> -
> -#include <common.h>
> -#include <linux/libfdt.h>
> -#include <linux/err.h>
> -#include <asm/arch/gx.h>
> -#include <asm/arch/sm.h>
> -#include <asm/armv8/mmu.h>
> -#include <asm/unaligned.h>
> -#include <linux/sizes.h>
> -#include <efi_loader.h>
> -#include <asm/io.h>
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -int dram_init(void)
> -{
> - const fdt64_t *val;
> - int offset;
> - int len;
> -
> - offset = fdt_path_offset(gd->fdt_blob, "/memory");
> - if (offset < 0)
> - return -EINVAL;
> -
> - val = fdt_getprop(gd->fdt_blob, offset, "reg", &len);
> - if (len < sizeof(*val) * 2)
> - return -EINVAL;
> -
> - /* Use unaligned access since cache is still disabled */
> - gd->ram_size = get_unaligned_be64(&val[1]);
> -
> - return 0;
> -}
> -
> -phys_size_t get_effective_memsize(void)
> -{
> - /* Size is reported in MiB, convert it in bytes */
> - return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK)
> - >> GX_AO_MEM_SIZE_SHIFT) * SZ_1M;
> -}
> -
> -static void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size)
> -{
> - int ret;
> -
> - ret = fdt_add_mem_rsv(fdt, start, size);
> - if (ret)
> - printf("Could not reserve zone @ 0x%llx\n", start);
> -
> - if (IS_ENABLED(CONFIG_EFI_LOADER)) {
> - efi_add_memory_map(start,
> - ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT,
> - EFI_RESERVED_MEMORY_TYPE, false);
> - }
> -}
> -
> -void meson_gx_init_reserved_memory(void *fdt)
> -{
> - u64 bl31_size, bl31_start;
> - u64 bl32_size, bl32_start;
> - u32 reg;
> -
> - /*
> - * Get ARM Trusted Firmware reserved memory zones in :
> - * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0
> - * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL
> - * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
> - */
> -
> - reg = readl(GX_AO_SEC_GP_CFG3);
> -
> - bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK)
> - >> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
> - bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
> -
> - bl31_start = readl(GX_AO_SEC_GP_CFG5);
> - bl32_start = readl(GX_AO_SEC_GP_CFG4);
> -
> - /*
> - * Early Meson GX Firmware revisions did not provide the reserved
> - * memory zones in the registers, keep fixed memory zone handling.
> - */
> - if (IS_ENABLED(CONFIG_MESON_GX) &&
> - !reg && !bl31_start && !bl32_start) {
> - bl31_start = 0x10000000;
> - bl31_size = 0x200000;
> - }
> -
> - /* Add first 16MiB reserved zone */
> - meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE);
> -
> - /* Add BL31 reserved zone */
> - if (bl31_start && bl31_size)
> - meson_board_add_reserved_memory(fdt, bl31_start, bl31_size);
> -
> - /* Add BL32 reserved zone */
> - if (bl32_start && bl32_size)
> - meson_board_add_reserved_memory(fdt, bl32_start, bl32_size);
> -}
> -
> -void reset_cpu(ulong addr)
> -{
> - psci_system_reset();
> -}
> -
> -static struct mm_region gx_mem_map[] = {
> - {
> - .virt = 0x0UL,
> - .phys = 0x0UL,
> - .size = 0xc0000000UL,
> - .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> - PTE_BLOCK_INNER_SHARE
> - }, {
> - .virt = 0xc0000000UL,
> - .phys = 0xc0000000UL,
> - .size = 0x30000000UL,
> - .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> - PTE_BLOCK_NON_SHARE |
> - PTE_BLOCK_PXN | PTE_BLOCK_UXN
> - }, {
> - /* List terminator */
> - 0,
> - }
> -};
> -
> -struct mm_region *mem_map = gx_mem_map;
> diff --git a/arch/arm/mach-meson/eth.c b/arch/arm/mach-meson/eth.c
> deleted file mode 100644
> index 8b28bc8..0000000
> --- a/arch/arm/mach-meson/eth.c
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Copyright (C) 2016 BayLibre, SAS
> - * Author: Neil Armstrong <narmstrong at baylibre.com>
> - */
> -
> -#include <common.h>
> -#include <dm.h>
> -#include <asm/io.h>
> -#include <asm/arch/gx.h>
> -#include <asm/arch/eth.h>
> -#include <phy.h>
> -
> -/* Configure the Ethernet MAC with the requested interface mode
> - * with some optional flags.
> - */
> -void meson_gx_eth_init(phy_interface_t mode, unsigned int flags)
> -{
> - switch (mode) {
> - case PHY_INTERFACE_MODE_RGMII:
> - case PHY_INTERFACE_MODE_RGMII_ID:
> - case PHY_INTERFACE_MODE_RGMII_RXID:
> - case PHY_INTERFACE_MODE_RGMII_TXID:
> - /* Set RGMII mode */
> - setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
> - GX_ETH_REG_0_TX_PHASE(1) |
> - GX_ETH_REG_0_TX_RATIO(4) |
> - GX_ETH_REG_0_PHY_CLK_EN |
> - GX_ETH_REG_0_CLK_EN);
> - break;
> -
> - case PHY_INTERFACE_MODE_RMII:
> - /* Set RMII mode */
> - out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
> - GX_ETH_REG_0_CLK_EN);
> -
> - /* Use GXL RMII Internal PHY */
> - if (IS_ENABLED(CONFIG_MESON_GXL) &&
> - (flags & MESON_GXL_USE_INTERNAL_RMII_PHY)) {
> - writel(0x10110181, GX_ETH_REG_2);
> - writel(0xe40908ff, GX_ETH_REG_3);
> - }
> -
> - break;
> -
> - default:
> - printf("Invalid Ethernet interface mode\n");
> - return;
> - }
> -
> - /* Enable power gate */
> - clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
> -}
> diff --git a/arch/arm/mach-meson/sm.c b/arch/arm/mach-meson/sm.c
> index 0bba5e4..a07b468 100644
> --- a/arch/arm/mach-meson/sm.c
> +++ b/arch/arm/mach-meson/sm.c
> @@ -6,7 +6,6 @@
> */
>
> #include <common.h>
> -#include <asm/arch/gx.h>
> #include <linux/kernel.h>
>
> #define FN_GET_SHARE_MEM_INPUT_BASE 0x82000020
> diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c
> index 2a2755c..d784d6b 100644
> --- a/board/amlogic/odroid-c2/odroid-c2.c
> +++ b/board/amlogic/odroid-c2/odroid-c2.c
> @@ -28,7 +28,7 @@ int misc_init_r(void)
> char serial[EFUSE_SN_SIZE];
> ssize_t len;
>
> - meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
> + meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
>
> if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
> len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
> @@ -40,7 +40,7 @@ int misc_init_r(void)
> if (!env_get("serial#")) {
> len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial,
> EFUSE_SN_SIZE);
> - if (len == EFUSE_SN_SIZE)
> + if (len == EFUSE_SN_SIZE)
> env_set("serial#", serial);
> }
>
> @@ -49,7 +49,7 @@ int misc_init_r(void)
>
> int ft_board_setup(void *blob, bd_t *bd)
> {
> - meson_gx_init_reserved_memory(blob);
> + meson_init_reserved_memory(blob);
>
> return 0;
> }
> diff --git a/board/amlogic/p212/p212.c b/board/amlogic/p212/p212.c
> index 00e07d7..33992a2 100644
> --- a/board/amlogic/p212/p212.c
> +++ b/board/amlogic/p212/p212.c
> @@ -29,8 +29,8 @@ int misc_init_r(void)
> char serial[EFUSE_SN_SIZE];
> ssize_t len;
>
> - meson_gx_eth_init(PHY_INTERFACE_MODE_RMII,
> - MESON_GXL_USE_INTERNAL_RMII_PHY);
> + meson_eth_init(PHY_INTERFACE_MODE_RMII,
> + MESON_USE_INTERNAL_RMII_PHY);
>
> if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
> len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
> @@ -51,7 +51,7 @@ int misc_init_r(void)
>
> int ft_board_setup(void *blob, bd_t *bd)
> {
> - meson_gx_init_reserved_memory(blob);
> + meson_init_reserved_memory(blob);
>
> return 0;
> }
> diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c
> index ff56569..b59c11b 100644
> --- a/board/amlogic/q200/q200.c
> +++ b/board/amlogic/q200/q200.c
> @@ -29,7 +29,7 @@ int misc_init_r(void)
> char serial[EFUSE_SN_SIZE];
> ssize_t len;
>
> - meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
> + meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
>
> /* Reset PHY on GPIOZ_14 */
> clrbits_le32(GX_GPIO_EN(3), BIT(14));
> @@ -56,7 +56,7 @@ int misc_init_r(void)
>
> int ft_board_setup(void *blob, bd_t *bd)
> {
> - meson_gx_init_reserved_memory(blob);
> + meson_init_reserved_memory(blob);
>
> return 0;
> }
> diff --git a/drivers/clk/clk_meson.c b/drivers/clk/clk_meson.c
> index 87e959e..978f646 100644
> --- a/drivers/clk/clk_meson.c
> +++ b/drivers/clk/clk_meson.c
> @@ -6,7 +6,7 @@
> */
>
> #include <common.h>
> -#include <asm/arch/clock.h>
> +#include <asm/arch/clock-gx.h>
> #include <asm/io.h>
> #include <clk-uclass.h>
> #include <div64.h>
>
--
Loic Devulder <ldevulder at suse.com> | ldevulder at irc
0x175A963893C85F55 | D220 DEF5 56A3 DE00 9DAA 78BA 175A 9638 93C8 5F55
Senior QA Engineer | Container & Storage Solutions Quality Assurance
team (qa-css)
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton HRB,
21284 (AG Nuernberg)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181120/fc81a5af/attachment.sig>
More information about the U-Boot
mailing list