[U-Boot] [PATCH v3 7/7] x86: acpi: Generate SPCR table
Andy Shevchenko
andriy.shevchenko at linux.intel.com
Tue Nov 20 21:52:38 UTC 2018
Microsoft specifies a SPCR (Serial Port Console Redirection Table) [1].
Let's provide it in U-Boot.
[1]: https://docs.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
arch/x86/include/asm/acpi_table.h | 2 +
arch/x86/lib/acpi_table.c | 118 ++++++++++++++++++++++++++++++
2 files changed, 120 insertions(+)
diff --git a/arch/x86/include/asm/acpi_table.h b/arch/x86/include/asm/acpi_table.h
index 51cc806673..e3b65cff66 100644
--- a/arch/x86/include/asm/acpi_table.h
+++ b/arch/x86/include/asm/acpi_table.h
@@ -327,6 +327,8 @@ struct acpi_global_nvs;
#define ACPI_DBG2_USB_XHCI 0x0000
#define ACPI_DBG2_USB_EHCI 0x0001
+#define ACPI_DBG2_UNKNOWN 0x00FF
+
/* SPCR (Serial Port Console Redirection table) */
struct __packed acpi_spcr {
struct acpi_table_header header;
diff --git a/arch/x86/lib/acpi_table.c b/arch/x86/lib/acpi_table.c
index c6b2026613..5a37a22c8c 100644
--- a/arch/x86/lib/acpi_table.c
+++ b/arch/x86/lib/acpi_table.c
@@ -12,6 +12,7 @@
#include <cpu.h>
#include <dm.h>
#include <dm/uclass-internal.h>
+#include <serial.h>
#include <version.h>
#include <asm/acpi/global_nvs.h>
#include <asm/acpi_table.h>
@@ -338,6 +339,115 @@ static void acpi_create_mcfg(struct acpi_mcfg *mcfg)
header->checksum = table_compute_checksum((void *)mcfg, header->length);
}
+static void acpi_create_spcr(struct acpi_spcr *spcr)
+{
+ struct acpi_table_header *header = &(spcr->header);
+ struct serial_device_info serial_info = {0};
+ ulong serial_address, serial_offset;
+ uint serial_config;
+ uint serial_width;
+ int access_size;
+ int space_id;
+ int ret;
+
+ /* Fill out header fields */
+ acpi_fill_header(header, "SPCR");
+ header->length = sizeof(struct acpi_spcr);
+ header->revision = 2;
+
+ ret = serial_getinfo(&serial_info);
+ if (ret)
+ serial_info.type = SERIAL_CHIP_UNKNOWN;
+
+ /* Encode chip type */
+ switch (serial_info.type) {
+ case SERIAL_CHIP_16550_COMPATIBLE:
+ spcr->interface_type = ACPI_DBG2_16550_COMPATIBLE;
+ break;
+ case SERIAL_CHIP_UNKNOWN:
+ default:
+ spcr->interface_type = ACPI_DBG2_UNKNOWN;
+ break;
+ }
+
+ /* Encode address space */
+ switch (serial_info.addr_space) {
+ case SERIAL_ADDRESS_SPACE_MEMORY:
+ space_id = ACPI_ADDRESS_SPACE_MEMORY;
+ break;
+ case SERIAL_ADDRESS_SPACE_IO:
+ default:
+ space_id = ACPI_ADDRESS_SPACE_IO;
+ break;
+ }
+
+ serial_width = serial_info.reg_width * 8;
+ serial_offset = serial_info.reg_offset << serial_info.reg_shift;
+ serial_address = serial_info.addr + serial_offset;
+
+ /* Encode register access size */
+ switch (serial_info.reg_shift) {
+ case 0:
+ access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
+ break;
+ case 1:
+ access_size = ACPI_ACCESS_SIZE_WORD_ACCESS;
+ break;
+ case 2:
+ access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+ break;
+ case 3:
+ access_size = ACPI_ACCESS_SIZE_QWORD_ACCESS;
+ break;
+ default:
+ access_size = ACPI_ACCESS_SIZE_UNDEFINED;
+ break;
+ }
+
+ debug("UART type %u @ %lx\n", spcr->interface_type, serial_address);
+
+ /* Fill GAS */
+ spcr->serial_port.space_id = space_id;
+ spcr->serial_port.bit_width = serial_width;
+ spcr->serial_port.bit_offset = 0;
+ spcr->serial_port.access_size = access_size;
+ spcr->serial_port.addrl = lower_32_bits(serial_address);
+ spcr->serial_port.addrh = upper_32_bits(serial_address);
+
+ /* Encode baud rate */
+ switch (serial_info.baudrate) {
+ case 9600:
+ spcr->baud_rate = 3;
+ break;
+ case 19200:
+ spcr->baud_rate = 4;
+ break;
+ case 57600:
+ spcr->baud_rate = 6;
+ break;
+ case 115200:
+ spcr->baud_rate = 7;
+ break;
+ default:
+ spcr->baud_rate = 0;
+ break;
+ }
+
+ ret = serial_getconfig(&serial_config);
+ if (ret)
+ serial_config = SERIAL_DEFAULT_CONFIG;
+
+ spcr->parity = SERIAL_GET_PARITY(serial_config);
+ spcr->stop_bits = SERIAL_GET_STOP(serial_config);
+
+ /* No PCI devices for now */
+ spcr->pci_device_id = 0xffff;
+ spcr->pci_vendor_id = 0xffff;
+
+ /* Fix checksum */
+ header->checksum = table_compute_checksum((void *)spcr, header->length);
+}
+
/*
* QEMU's version of write_acpi_tables is defined in drivers/misc/qfw.c
*/
@@ -352,6 +462,7 @@ ulong write_acpi_tables(ulong start)
struct acpi_fadt *fadt;
struct acpi_mcfg *mcfg;
struct acpi_madt *madt;
+ struct acpi_spcr *spcr;
int i;
current = start;
@@ -440,6 +551,13 @@ ulong write_acpi_tables(ulong start)
acpi_add_table(rsdp, mcfg);
current = ALIGN(current, 16);
+ debug("ACPI: * SPCR\n");
+ spcr = (struct acpi_spcr *)current;
+ acpi_create_spcr(spcr);
+ current += spcr->header.length;
+ acpi_add_table(rsdp, spcr);
+ current = ALIGN(current, 16);
+
debug("current = %x\n", current);
acpi_rsdp_addr = (unsigned long)rsdp;
--
2.19.1
More information about the U-Boot
mailing list