[U-Boot] [PATCH 2/2] armv8: ls1043aqds: modify the qspi_bootcmd definition

Wen He wen.he_1 at nxp.com
Wed Nov 21 03:51:04 UTC 2018



> -----Original Message-----
> From: York Sun
> Sent: 2018年11月21日 0:58
> To: Wen He <wen.he_1 at nxp.com>; u-boot at lists.denx.de
> Cc: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>; Alison Wang
> <alison.wang at nxp.com>
> Subject: Re: [PATCH 2/2] armv8: ls1043aqds: modify the qspi_bootcmd
> definition
> 
> On 11/20/18 12:55 AM, Wen He wrote:
> > Fix the kernel offset of qspi_bootcmd scripts, followed the
> > qoriq_memory_layout definition.
> >
> > Signed-off-by: Wen He <wen.he_1 at nxp.com>
> > ---
> >  include/configs/ls1043a_common.h | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/include/configs/ls1043a_common.h
> > b/include/configs/ls1043a_common.h
> > index 795e904..7b2f31c 100644
> > --- a/include/configs/ls1043a_common.h
> > +++ b/include/configs/ls1043a_common.h
> > @@ -302,8 +302,8 @@
> >  		"source ${scriptaddr}\0"			\
> >  	"qspi_bootcmd=echo Trying load from qspi..;"	\
> >  		"sf probe && sf read $load_addr "	\
> > -		"$kernel_addr $kernel_size; env exists secureboot "	\
> > -		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
> > +		"$kernel_start $kernel_size; env exists secureboot "	\
> > +		"&& sf read $kernelheader_addr_r $kernelheader_start "	\
> >  		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
> >  		"bootm $load_addr#$board\0"	\
> >  	"nor_bootcmd=echo Trying load from nor..;"	\
> >
> 
> Why do you need to copy the images from QSPI flash? It is directly readable. It
> has been this way and it is not your fault. Can you fix it?
> 

For now, we only supported DDR loading that need copy the images from QSPI/NAND/SD/NOR flash.
Will add support directly readable from QSPI and NOR flash in next LSDK.

Best Regards,
Wen

> York


More information about the U-Boot mailing list