[U-Boot] [PATCH v3 9/9] arm: sunxi: Reduce inrush current on Olimex OLinuXino-A20-Lime2-eMMC

[Priit Laes]

From: Priit Laes <priit.laes at paf.com>

The lime2 features a too large capacitor on the LDO3 output, which
causes the PMIC to shutdown when enabling power. To be able to still
boot up however, we must gradually enable power on LDO3 for this board.

We do this by enabling both the inrush quirk and the maximum slope the
AXP209 supports.

Signed-off-by: Priit Laes <plaes at plaes.org>
---
 configs/A20-OLinuXino-Lime2-eMMC_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
index 467ca4e..dee8d02 100644
--- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig
+++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
@@ -26,7 +26,9 @@ CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
 CONFIG_MII=y
 CONFIG_SUN7I_GMAC=y
+CONFIG_AXP_ALDO3_INRUSH_QUIRK=y
 CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO3_VOLT_SLOPE_08=y
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
-- 
git-series 0.9.1