[U-Boot] [PATCH v1 3/3] rtc: m41t62: Convert the RTC driver to support the driver model (DM)
Stefan Roese
sr at denx.de
Thu Nov 22 06:02:34 UTC 2018
On 21.11.18 23:43, Lukasz Majewski wrote:
> After this change the m41t62.c can be used with RTC subsystem (i.e. date
> command) which uses device model (DM).
>
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
>
> ---
>
> Changes in v1:
> - New
>
> drivers/rtc/m41t62.c | 75 +++++++++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 72 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/rtc/m41t62.c b/drivers/rtc/m41t62.c
> index cc230e2b78..2dcc1f2a63 100644
> --- a/drivers/rtc/m41t62.c
> +++ b/drivers/rtc/m41t62.c
> @@ -1,5 +1,8 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> + * (C) Copyright 2018
> + * Lukasz Majewski, DENX Software Engineering, lukma at denx.de.
> + *
> * (C) Copyright 2008
> * Stefan Roese, DENX Software Engineering, sr at denx.de.
> *
> @@ -15,6 +18,7 @@
>
> #include <common.h>
> #include <command.h>
> +#include <dm.h>
> #include <rtc.h>
> #include <i2c.h>
>
> @@ -49,11 +53,23 @@
>
> #define M41T80_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */
>
> +#ifdef CONFIG_DM_RTC
> +static int m41t62_rtc_get(struct udevice *dev, struct rtc_time *tm)
> +{
> +#else
> int rtc_get(struct rtc_time *tm)
> {
> +#endif /* CONFIG_DM_RTC */
> u8 buf[M41T62_DATETIME_REG_SIZE];
>
> +#ifdef CONFIG_DM_RTC
> + int ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
> +
> + if (ret)
> + return ret;
> +#else
> i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
> +#endif /* CONFIG_DM_RTC */
>
> debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
> "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
> @@ -81,15 +97,28 @@ int rtc_get(struct rtc_time *tm)
> return 0;
> }
These #ifdef's in the function headers are a bit ugly. I personally
prefer to create a common function and call this from the "old"
(non-DM) function and the newly created DM function instead.
Perhaps you can rework this for all these functions (below as well)
and re-submit?
Thanks,
Stefan
>
> +#ifdef CONFIG_DM_RTC
> +static int m41t62_rtc_set(struct udevice *dev, const struct rtc_time *tm)
> +{
> +#else
> int rtc_set(struct rtc_time *tm)
> {
> +#endif /* CONFIG_DM_RTC */
> u8 buf[M41T62_DATETIME_REG_SIZE];
> + int ret;
>
> debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
> tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
> tm->tm_hour, tm->tm_min, tm->tm_sec);
>
> - i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
> +#ifdef CONFIG_DM_RTC
> + ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
> +#else
> + ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf,
> + M41T62_DATETIME_REG_SIZE);
> +#endif /* CONFIG_DM_RTC */
> + if (ret)
> + return ret;
>
> /* Merge time-data and register flags into buf[0..7] */
> buf[M41T62_REG_SSEC] = 0;
> @@ -108,8 +137,13 @@ int rtc_set(struct rtc_time *tm)
> /* assume 20YY not 19YY */
> buf[M41T62_REG_YEAR] = bin2bcd(tm->tm_year % 100);
>
> - if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf,
> - M41T62_DATETIME_REG_SIZE)) {
> +#ifdef CONFIG_DM_RTC
> + ret = dm_i2c_write(dev, 0, buf, sizeof(buf));
> +#else
> + ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf,
> + M41T62_DATETIME_REG_SIZE);
> +#endif /* CONFIG_DM_RTC */
> + if (ret) {
> printf("I2C write failed in %s()\n", __func__);
> return -1;
> }
> @@ -117,15 +151,50 @@ int rtc_set(struct rtc_time *tm)
> return 0;
> }
>
> +#ifdef CONFIG_DM_RTC
> +static int m41t62_rtc_reset(struct udevice *dev)
> +{
> +#else
> void rtc_reset(void)
> {
> +#endif /* CONFIG_DM_RTC */
> u8 val;
>
> /*
> * M41T82: Make sure HT (Halt Update) bit is cleared.
> * This bit is 0 in M41T62 so its save to clear it always.
> */
> +#ifdef CONFIG_DM_RTC
> + int ret = dm_i2c_read(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
> +
> + val &= ~M41T80_ALHOUR_HT;
> + ret |= dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
> +
> + return ret;
> +#else
> i2c_read(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1);
> val &= ~M41T80_ALHOUR_HT;
> i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1);
> +#endif /* CONFIG_DM_RTC */
> }
> +
> +#ifdef CONFIG_DM_RTC
> +static const struct rtc_ops m41t62_rtc_ops = {
> + .get = m41t62_rtc_get,
> + .set = m41t62_rtc_set,
> + .reset = m41t62_rtc_reset,
> +};
> +
> +static const struct udevice_id m41t62_rtc_ids[] = {
> + { .compatible = "st,m41t62" },
> + { .compatible = "microcrystal,rv4162" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(rtc_m41t62) = {
> + .name = "rtc-m41t62",
> + .id = UCLASS_RTC,
> + .of_match = m41t62_rtc_ids,
> + .ops = &m41t62_rtc_ops,
> +};
> +#endif /* CONFIG_DM_RTC */
>
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list