[U-Boot] [PATCH 1/2] net: mvpp2: fix lookup of mdio registers base address

[Stefan Roese]

On 21.11.18 12:05, Baruch Siach wrote:
> Current mdio base lookup code relies on a 'reg' property at the upper CP
> node. There is no 'reg' property there in current DT files of Armada
> CP110. Use ofnode_get_addr() instead since it provides proper DT address
> translation.
> 
> Cc: Ken Ma <make at marvell.com>
> Cc: Stefan Chulski <stefanc at marvell.com>
> Signed-off-by: Baruch Siach <baruch at tkos.co.il>
> ---
>   drivers/net/mvpp2.c | 17 +++++++----------
>   1 file changed, 7 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
> index 9b3ab25c1954..23c4da8cebbd 100644
> --- a/drivers/net/mvpp2.c
> +++ b/drivers/net/mvpp2.c
> @@ -4705,21 +4705,22 @@ static int phy_info_parse(struct udevice *dev, struct mvpp2_port *port)
>   {
>   	int port_node = dev_of_offset(dev);
>   	const char *phy_mode_str;
> -	int phy_node, mdio_off, cp_node;
> +	int phy_node;
>   	u32 id;
>   	u32 phyaddr = 0;
>   	int phy_mode = -1;
> -	phys_addr_t mdio_addr;
>   
>   	phy_node = fdtdec_lookup_phandle(gd->fdt_blob, port_node, "phy");
>   
>   	if (phy_node > 0) {
> +		ofnode phy_ofnode;
> +		fdt_addr_t phy_base;
> +
>   		phyaddr = fdtdec_get_int(gd->fdt_blob, phy_node, "reg", 0);
>   		if (phyaddr < 0) {
>   			dev_err(&pdev->dev, "could not find phy address\n");
>   			return -1;
>   		}
> -		mdio_off = fdt_parent_offset(gd->fdt_blob, phy_node);
>   
>   		/* TODO: This WA for mdio issue. U-boot 2017 don't have
>   		 * mdio driver and on MACHIATOBin board ports from CP1
> @@ -4728,14 +4729,10 @@ static int phy_info_parse(struct udevice *dev, struct mvpp2_port *port)
>   		 * base address. WA should be removed after
>   		 * mdio driver implementation.
>   		 */
> -		mdio_addr = fdtdec_get_uint(gd->fdt_blob,
> -					    mdio_off, "reg", 0);
> -
> -		cp_node = fdt_parent_offset(gd->fdt_blob, mdio_off);
> -		mdio_addr |= fdt_get_base_address((void *)gd->fdt_blob,
> -						  cp_node);
>   
> -		port->priv->mdio_base = (void *)mdio_addr;
> +		phy_ofnode = ofnode_get_parent(offset_to_ofnode(phy_node));
> +		phy_base = ofnode_get_addr(phy_ofnode);
> +		port->priv->mdio_base = (void *)phy_base;
>   
>   		if (port->priv->mdio_base < 0) {
>   			dev_err(&pdev->dev, "could not find mdio base address\n");
> 

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan