[U-Boot] [PATCH u-boot v3 1/3] regmap: add regmap_read_poll_timeout() helper

[Neil Armstrong]

Add the regmap_read_poll_timeout() macro based on the Linux implementation
to simplify register polling with configurable timeout and sleep.

Acked-by: Jagan Teki <jagan at openedev.com>
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 include/regmap.h | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/include/regmap.h b/include/regmap.h
index b2b733fda6..a3afb72df5 100644
--- a/include/regmap.h
+++ b/include/regmap.h
@@ -239,6 +239,44 @@ int regmap_raw_read_range(struct regmap *map, uint range_num, uint offset,
 #define regmap_get(map, type, member, valp) \
 	regmap_range_get(map, 0, type, member, valp)
 
+/**
+ * regmap_read_poll_timeout - Poll until a condition is met or a timeout occurs
+ *
+ * @map:	Regmap to read from
+ * @addr:	Offset to poll
+ * @val:	Unsigned integer variable to read the value into
+ * @cond:	Break condition (usually involving @val)
+ * @sleep_us:	Maximum time to sleep between reads in us (0 tight-loops).
+ * @timeout_ms:	Timeout in ms, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read
+ * error return value in case of a error read. In the two former cases,
+ * the last read value at @addr is stored in @val. Must not be called
+ * from atomic context if sleep_us or timeout_us are used.
+ *
+ * This is modelled after the regmap_read_poll_timeout macros in linux but
+ * with millisecond timeout.
+ */
+#define regmap_read_poll_timeout(map, addr, val, cond, sleep_us, timeout_ms) \
+({ \
+	unsigned long __start = get_timer(0); \
+	int __ret; \
+	for (;;) { \
+		__ret = regmap_read((map), (addr), &(val)); \
+		if (__ret) \
+			break; \
+		if (cond) \
+			break; \
+		if ((timeout_ms) && get_timer(__start) > (timeout_ms)) { \
+			__ret = regmap_read((map), (addr), &(val)); \
+			break; \
+		} \
+		if ((sleep_us)) \
+			udelay((sleep_us)); \
+	} \
+	__ret ?: ((cond) ? 0 : -ETIMEDOUT); \
+})
+
 /**
  * regmap_update_bits() - Perform a read/modify/write using a mask
  *
-- 
2.19.1