[U-Boot] [PATCH 6/9] ARM: socfpga: Set default DTB address on A10

[Marek Vasut]

On 11/23/2018 11:10 AM, Chee, Tien Fong wrote:
> On Wed, 2018-11-21 at 15:22 +0100, Marek Vasut wrote:
>> On 11/21/2018 11:41 AM, tien.fong.chee at intel.com wrote:
>>>
>>> From: Tien Fong Chee <tien.fong.chee at intel.com>
>> Again, not your patch, please don't change authorship.
>>
>> http://git.denx.de/?p=u-boot/u-boot-socfpga.git;a=commit;h=eb32e56886
>> 9b5f91fe34efb2642875a8da5f0ebd
>>
>>>
>>> Set default DT blob address on A10 SoCDK, since this SoC uses OF
>>> separate configuration. The 0xf0000 address is just below the text
>>> base and still leaves enough room for the DT to grow.
>> Why is this needed ?
> This patch i also cherry picked from sdmmc_next custodian. I think you
> put this for FIT implementation? I saw there is load property
> "0xf00000" defined for fdt in .its.

Thanks for confirming that I am the original author of some of these
patches and you just changed that field when submitting them. That's a
big no-no.

Let's continue the discussion under patch 4/9.

>>> Signed-off-by: Marek Vasut <marex at denx.de>
>>> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
>>> ---
>>>  arch/arm/mach-socfpga/board.c |    8 ++++++++
>>>  1 files changed, 8 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-
>>> socfpga/board.c
>>> index 7c8c05c..436a8a8 100644
>>> --- a/arch/arm/mach-socfpga/board.c
>>> +++ b/arch/arm/mach-socfpga/board.c
>>> @@ -86,3 +86,11 @@ int g_dnl_board_usb_cable_connected(void)
>>>  	return 1;
>>>  }
>>>  #endif
>>> +
>>> +#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10) && \
>>> +!defined(CONFIG_SPL_BUILD) && defined(CONFIG_OF_SEPARATE)
>>> +void *board_fdt_blob_setup(void)
>>> +{
>>> +	return (void *)0xf00000;
>>> +}
>>> +#endif
>>>


-- 
Best regards,
Marek Vasut