[U-Boot] [PATCH] spl: implement CRC check on U-Boot uImage
Simon Goldschmidt
simon.k.r.goldschmidt at gmail.com
Sat Nov 24 12:46:41 UTC 2018
SPL currently does not check uImage CRCs when loading U-Boot.
This patch adds checking the uImage CRC when SPL loads U-Boot. It does
this by reusing the existing config option SPL_CRC32_SUPPORT to allow
leaving out the CRC check on boards where the additional code size or
boot time is a problem (adding the CRC check currently adds ~1.4 kByte
to flash).
The SPL_CRC32_SUPPORT config option now gets enabled by default if SPL
support for legacy images is enabled to check the CRC on all boards
that don't actively take countermeasures.
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
---
common/spl/Kconfig | 12 ++++++------
common/spl/spl.c | 30 +++++++++++++++++++++++++++++-
include/spl.h | 5 +++++
3 files changed, 40 insertions(+), 7 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index d0564621d4..29f365de16 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -207,13 +207,13 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
config SPL_CRC32_SUPPORT
bool "Support CRC32"
- depends on SPL_FIT
+ default y if SPL_LEGACY_IMAGE_SUPPORT
help
- Enable this to support CRC32 in FIT images within SPL. This is a
- 32-bit checksum value that can be used to verify images. This is
- the least secure type of checksum, suitable for detected
- accidental image corruption. For secure applications you should
- consider SHA1 or SHA256.
+ Enable this to support CRC32 in uImages or FIT images within SPL.
+ This is a 32-bit checksum value that can be used to verify images.
+ For FIT images, this is the least secure type of checksum, suitable
+ for detected accidental image corruption. For secure applications you
+ should consider SHA1 or SHA256.
config SPL_MD5_SUPPORT
bool "Support MD5"
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 12f9359c0a..2e88c09fc0 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -236,6 +236,14 @@ int spl_parse_image_header(struct spl_image_info *spl_image,
#ifdef CONFIG_SPL_LEGACY_IMAGE_SUPPORT
u32 header_size = sizeof(struct image_header);
+ if (CONFIG_IS_ENABLED(CRC32_SUPPORT)) {
+ /* check uImage header CRC */
+ if (!image_check_hcrc(header)) {
+ puts("SPL: Image header CRC check failed!\n");
+ return -EINVAL;
+ }
+ }
+
if (spl_image->flags & SPL_COPY_PAYLOAD_ONLY) {
/*
* On some system (e.g. powerpc), the load-address and
@@ -253,6 +261,13 @@ int spl_parse_image_header(struct spl_image_info *spl_image,
spl_image->size = image_get_data_size(header) +
header_size;
}
+#if CONFIG_IS_ENABLED(CRC32_SUPPORT)
+ /* store uImage data length and CRC to check later */
+ spl_image->dcrc_data = image_get_load(header);
+ spl_image->dcrc_length = image_get_data_size(header);
+ spl_image->dcrc = image_get_dcrc(header);
+#endif
+
spl_image->os = image_get_os(header);
spl_image->name = image_get_name(header);
debug("spl: payload image: %32s load addr: 0x%lx size: %d\n",
@@ -424,12 +439,25 @@ static struct spl_image_loader *spl_ll_find_loader(uint boot_device)
static int spl_load_image(struct spl_image_info *spl_image,
struct spl_image_loader *loader)
{
+ int ret;
struct spl_boot_device bootdev;
bootdev.boot_device = loader->boot_device;
bootdev.boot_device_name = NULL;
- return loader->load_image(spl_image, &bootdev);
+ ret = loader->load_image(spl_image, &bootdev);
+#if CONFIG_IS_ENABLED(CRC32_SUPPORT)
+ if (!ret && spl_image->dcrc_length) {
+ /* check data crc */
+ ulong dcrc = crc32_wd(0, (unsigned char *)spl_image->dcrc_data,
+ spl_image->dcrc_length, CHUNKSZ_CRC32);
+ if (dcrc != spl_image->dcrc) {
+ puts("SPL: Image data CRC check failed!\n");
+ ret = -EINVAL;
+ }
+ }
+#endif
+ return ret;
}
/**
diff --git a/include/spl.h b/include/spl.h
index 9a439f468b..7fccdce64b 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -33,6 +33,11 @@ struct spl_image_info {
u32 size;
u32 flags;
void *arg;
+#if CONFIG_IS_ENABLED(CRC32_SUPPORT)
+ ulong dcrc_data;
+ ulong dcrc_length;
+ ulong dcrc;
+#endif
};
/*
--
2.17.1
More information about the U-Boot
mailing list