[U-Boot] [GIT] Pull request: u-boot-dfu (24.11.2018)

Lukasz Majewski lukma at denx.de
Sat Nov 24 22:11:14 UTC 2018


Dear Marek,

The following changes since commit
5830791d91d1200854ef78fcb32f808c8080f0f0:

  Merge tag 'pull-tg18' of git://git.denx.de/u-boot-dm (2018-11-23
  17:25:27 -0500)

are available in the git repository at:

  git://git.denx.de/u-boot-dfu.git 

for you to fetch changes up to 0edf2bd52772d8202469b77ba63a6cd9867d1053:

  board: ti: am57xx: remove USB platform code (2018-11-24 22:59:55
  +0100)


NOTE:
-----

This series has a dependency on following patch:
"spl: Add support for logging in SPL and TPL" by Simon Glass
http://patchwork.ozlabs.org/patch/998686/


Travis-CI "clear" build:
https://travis-ci.org/lmajewski/u-boot-dfu/builds/459112024


Those are first two of total four patches prepared by Jean-Jacques. 
Let's apply them in step-by-step way (as other have some build issues).


----------------------------------------------------------------
Jean-Jacques Hiblot (18):
      usb: gadget: Do not call board_usb_xxx() directly in USB gadget
drivers usb: introduce a separate config option for DM USB device
      usb: udc: implement DM versions of
usb_gadget_initialize()/_release()/_handle_interrupt() dwc3_generic: do
not probe the USB device driver when it's bound dwc3: move phy
operation to core.c configs: evb-rk3328: Enable CONFIG_USB_DWC3
      dwc3-generic: Handle the PHYs, the clocks and the reset lines
      dwc3-generic: Add select_dr_mode operation
      usb: dwc3: Fix a compilation error with the edison defconfig
      syscon: dm: Add a new method to get a regmap from DTS
      phy: Add a new driver for OMAP's USB2 PHYs
      dwc3-generic: Add support for the TI DWC3 glue
      board: ti: dra7xx-evm: turn on USB clocks in late init stage
      dts: dra7x: make ocp2scp at 4a080000 compatible with simple-bus
      configs: enable DM_USB and DM_USB_DEV for all DRA7 platforms
      configs: am57xx_evm: Enable DM_USB and DM_USB_DEV
      board: ti: dra7-evm: remove USB platform code
      board: ti: am57xx: remove USB platform code

Vignesh R (2):
      phy: ti-pip3-phy: Add support for USB3 PHY
      board; ti: am57xx: turn on USB clocks

 arch/arm/Kconfig                  |   2 +
 arch/arm/dts/omap5-u-boot.dtsi    |   4 ++
 arch/sandbox/dts/test.dts         |   6 +-
 board/ti/am57xx/board.c           | 106
 +++++++----------------------------- board/ti/dra7xx/evm.c
 | 123 +++++++----------------------------------
 cmd/fastboot.c                    |   4 +-
 cmd/rockusb.c                     |   4 +-
 cmd/thordown.c                    |   4 +-
 cmd/usb_gadget_sdp.c              |   4 +-
 cmd/usb_mass_storage.c            |   4 +-
 common/dfu.c                      |   6 +-
 configs/am57xx_evm_defconfig      |  10 +++-
 configs/am57xx_hs_evm_defconfig   |  10 +++-
 configs/dra7xx_evm_defconfig      |   8 +--
 configs/dra7xx_hs_evm_defconfig   |   8 +--
 configs/evb-rk3328_defconfig      |   1 +
 drivers/core/syscon-uclass.c      |  23 ++++++++
 drivers/phy/Kconfig               |   9 +++
 drivers/phy/Makefile              |   1 +
 drivers/phy/omap-usb2-phy.c       | 196
 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/phy/ti-pipe3-phy.c        |  32 ++++++++---
 drivers/usb/Kconfig               |   6 ++
 drivers/usb/dwc3/Kconfig          |   7 ++-
 drivers/usb/dwc3/core.c           |  89 +++++++++++++++++++++++++++++-
 drivers/usb/dwc3/dwc3-generic.c   | 292
 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------
 drivers/usb/dwc3/ep0.c            |   3 +-
 drivers/usb/gadget/ether.c        |  38 ++-----------
 drivers/usb/gadget/udc/udc-core.c |  44 ++++++++++++++-
 drivers/usb/host/xhci-dwc3.c      |  95
 +++----------------------------- include/dwc3-uboot.h              |
 19 +++++++ include/linux/usb/gadget.h        |  18 ++++++
 include/syscon.h                  |  13 +++++
 test/dm/syscon.c                  |  29 ++++++++++ 33 files changed,
 816 insertions(+), 402 deletions(-) create mode 100644
 drivers/phy/omap-usb2-phy.c





Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181124/2f810db3/attachment.sig>


More information about the U-Boot mailing list