[U-Boot] [PATCH v2 24/32] spi: Zap mxs_spi driver-related code
Jagan Teki
jagan at amarulasolutions.com
Sun Nov 25 17:28:45 UTC 2018
Dropped
- mxs_spi driver
- CONFIG_MXS_SPI
Dropped becuase
- no active updates
- no dm conversion
- multiple pings for asking dm-conversion
- no reponse for dm converted patch
- driver-model migration expiry
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
configs/bg0900_defconfig | 1 -
configs/mx28evk_auart_console_defconfig | 1 -
configs/mx28evk_defconfig | 1 -
configs/mx28evk_nand_defconfig | 1 -
configs/mx28evk_spi_defconfig | 1 -
drivers/spi/Kconfig | 6 -
drivers/spi/Makefile | 1 -
drivers/spi/mxs_spi.c | 358 ------------------------
8 files changed, 370 deletions(-)
delete mode 100644 drivers/spi/mxs_spi.c
diff --git a/configs/bg0900_defconfig b/configs/bg0900_defconfig
index 6de81621cd..1883e28dee 100644
--- a/configs/bg0900_defconfig
+++ b/configs/bg0900_defconfig
@@ -37,5 +37,4 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_OF_LIBFDT=y
diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig
index d0572212f1..c9a2a7daf8 100644
--- a/configs/mx28evk_auart_console_defconfig
+++ b/configs/mx28evk_auart_console_defconfig
@@ -47,7 +47,6 @@ CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig
index ab59d7599b..c2fbbfe6ec 100644
--- a/configs/mx28evk_defconfig
+++ b/configs/mx28evk_defconfig
@@ -47,7 +47,6 @@ CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig
index 6b774cf248..80e82a7c4b 100644
--- a/configs/mx28evk_nand_defconfig
+++ b/configs/mx28evk_nand_defconfig
@@ -46,7 +46,6 @@ CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig
index 0a77e6e9f7..77123153cb 100644
--- a/configs/mx28evk_spi_defconfig
+++ b/configs/mx28evk_spi_defconfig
@@ -46,7 +46,6 @@ CONFIG_SPI_FLASH_SST=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
-CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ebe3ba3bcc..797ca80be7 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -334,12 +334,6 @@ config MXC_SPI
Enable the MXC SPI controller driver. This driver can be used
on various i.MX SoCs such as i.MX31/35/51/6/7.
-config MXS_SPI
- bool "MXS SPI Driver"
- help
- Enable the MXS SPI controller driver. This driver can be used
- on the i.MX23 and i.MX28 SoCs.
-
config OMAP3_SPI
bool "McSPI driver for OMAP"
help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 7d676988fd..c4c9d2f393 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -35,7 +35,6 @@ obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o
obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o
obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o
obj-$(CONFIG_MXC_SPI) += mxc_spi.o
-obj-$(CONFIG_MXS_SPI) += mxs_spi.o
obj-$(CONFIG_ATCSPI200_SPI) += atcspi200_spi.o
obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o
obj-$(CONFIG_PIC32_SPI) += pic32_spi.o
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
deleted file mode 100644
index 5065e407f8..0000000000
--- a/drivers/spi/mxs_spi.c
+++ /dev/null
@@ -1,358 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Freescale i.MX28 SPI driver
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
- * on behalf of DENX Software Engineering GmbH
- *
- * NOTE: This driver only supports the SPI-controller chipselects,
- * GPIO driven chipselects are not supported.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <memalign.h>
-#include <spi.h>
-#include <linux/errno.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/dma.h>
-
-#define MXS_SPI_MAX_TIMEOUT 1000000
-#define MXS_SPI_PORT_OFFSET 0x2000
-#define MXS_SSP_CHIPSELECT_MASK 0x00300000
-#define MXS_SSP_CHIPSELECT_SHIFT 20
-
-#define MXSSSP_SMALL_TRANSFER 512
-
-struct mxs_spi_slave {
- struct spi_slave slave;
- uint32_t max_khz;
- uint32_t mode;
- struct mxs_ssp_regs *regs;
-};
-
-static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave)
-{
- return container_of(slave, struct mxs_spi_slave, slave);
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- /* MXS SPI: 4 ports and 3 chip selects maximum */
- if (!mxs_ssp_bus_id_valid(bus) || cs > 2)
- return 0;
- else
- return 1;
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct mxs_spi_slave *mxs_slave;
-
- if (!spi_cs_is_valid(bus, cs)) {
- printf("mxs_spi: invalid bus %d / chip select %d\n", bus, cs);
- return NULL;
- }
-
- mxs_slave = spi_alloc_slave(struct mxs_spi_slave, bus, cs);
- if (!mxs_slave)
- return NULL;
-
- if (mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + bus))
- goto err_init;
-
- mxs_slave->max_khz = max_hz / 1000;
- mxs_slave->mode = mode;
- mxs_slave->regs = mxs_ssp_regs_by_bus(bus);
-
- return &mxs_slave->slave;
-
-err_init:
- free(mxs_slave);
- return NULL;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
- free(mxs_slave);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
- struct mxs_ssp_regs *ssp_regs = mxs_slave->regs;
- uint32_t reg = 0;
-
- mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
-
- writel((slave->cs << MXS_SSP_CHIPSELECT_SHIFT) |
- SSP_CTRL0_BUS_WIDTH_ONE_BIT,
- &ssp_regs->hw_ssp_ctrl0);
-
- reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS;
- reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
- reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
- writel(reg, &ssp_regs->hw_ssp_ctrl1);
-
- writel(0, &ssp_regs->hw_ssp_cmd0);
-
- mxs_set_ssp_busclock(slave->bus, mxs_slave->max_khz);
-
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-}
-
-static void mxs_spi_start_xfer(struct mxs_ssp_regs *ssp_regs)
-{
- writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set);
- writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr);
-}
-
-static void mxs_spi_end_xfer(struct mxs_ssp_regs *ssp_regs)
-{
- writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr);
- writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set);
-}
-
-static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave,
- char *data, int length, int write, unsigned long flags)
-{
- struct mxs_ssp_regs *ssp_regs = slave->regs;
-
- if (flags & SPI_XFER_BEGIN)
- mxs_spi_start_xfer(ssp_regs);
-
- while (length--) {
- /* We transfer 1 byte */
-#if defined(CONFIG_MX23)
- writel(SSP_CTRL0_XFER_COUNT_MASK, &ssp_regs->hw_ssp_ctrl0_clr);
- writel(1, &ssp_regs->hw_ssp_ctrl0_set);
-#elif defined(CONFIG_MX28)
- writel(1, &ssp_regs->hw_ssp_xfer_size);
-#endif
-
- if ((flags & SPI_XFER_END) && !length)
- mxs_spi_end_xfer(ssp_regs);
-
- if (write)
- writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr);
- else
- writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set);
-
- writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set);
-
- if (mxs_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg,
- SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
- printf("MXS SPI: Timeout waiting for start\n");
- return -ETIMEDOUT;
- }
-
- if (write)
- writel(*data++, &ssp_regs->hw_ssp_data);
-
- writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set);
-
- if (!write) {
- if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_status_reg,
- SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) {
- printf("MXS SPI: Timeout waiting for data\n");
- return -ETIMEDOUT;
- }
-
- *data = readl(&ssp_regs->hw_ssp_data);
- data++;
- }
-
- if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg,
- SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
- printf("MXS SPI: Timeout waiting for finish\n");
- return -ETIMEDOUT;
- }
- }
-
- return 0;
-}
-
-static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
- char *data, int length, int write, unsigned long flags)
-{
- const int xfer_max_sz = 0xff00;
- const int desc_count = DIV_ROUND_UP(length, xfer_max_sz) + 1;
- struct mxs_ssp_regs *ssp_regs = slave->regs;
- struct mxs_dma_desc *dp;
- uint32_t ctrl0;
- uint32_t cache_data_count;
- const uint32_t dstart = (uint32_t)data;
- int dmach;
- int tl;
- int ret = 0;
-
-#if defined(CONFIG_MX23)
- const int mxs_spi_pio_words = 1;
-#elif defined(CONFIG_MX28)
- const int mxs_spi_pio_words = 4;
-#endif
-
- ALLOC_CACHE_ALIGN_BUFFER(struct mxs_dma_desc, desc, desc_count);
-
- memset(desc, 0, sizeof(struct mxs_dma_desc) * desc_count);
-
- ctrl0 = readl(&ssp_regs->hw_ssp_ctrl0);
- ctrl0 |= SSP_CTRL0_DATA_XFER;
-
- if (flags & SPI_XFER_BEGIN)
- ctrl0 |= SSP_CTRL0_LOCK_CS;
- if (!write)
- ctrl0 |= SSP_CTRL0_READ;
-
- if (length % ARCH_DMA_MINALIGN)
- cache_data_count = roundup(length, ARCH_DMA_MINALIGN);
- else
- cache_data_count = length;
-
- /* Flush data to DRAM so DMA can pick them up */
- if (write)
- flush_dcache_range(dstart, dstart + cache_data_count);
-
- /* Invalidate the area, so no writeback into the RAM races with DMA */
- invalidate_dcache_range(dstart, dstart + cache_data_count);
-
- dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + slave->slave.bus;
-
- dp = desc;
- while (length) {
- dp->address = (dma_addr_t)dp;
- dp->cmd.address = (dma_addr_t)data;
-
- /*
- * This is correct, even though it does indeed look insane.
- * I hereby have to, wholeheartedly, thank Freescale Inc.,
- * for always inventing insane hardware and keeping me busy
- * and employed ;-)
- */
- if (write)
- dp->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ;
- else
- dp->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE;
-
- /*
- * The DMA controller can transfer large chunks (64kB) at
- * time by setting the transfer length to 0. Setting tl to
- * 0x10000 will overflow below and make .data contain 0.
- * Otherwise, 0xff00 is the transfer maximum.
- */
- if (length >= 0x10000)
- tl = 0x10000;
- else
- tl = min(length, xfer_max_sz);
-
- dp->cmd.data |=
- ((tl & 0xffff) << MXS_DMA_DESC_BYTES_OFFSET) |
- (mxs_spi_pio_words << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
- MXS_DMA_DESC_HALT_ON_TERMINATE |
- MXS_DMA_DESC_TERMINATE_FLUSH;
-
- data += tl;
- length -= tl;
-
- if (!length) {
- dp->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM;
-
- if (flags & SPI_XFER_END) {
- ctrl0 &= ~SSP_CTRL0_LOCK_CS;
- ctrl0 |= SSP_CTRL0_IGNORE_CRC;
- }
- }
-
- /*
- * Write CTRL0, CMD0, CMD1 and XFER_SIZE registers in
- * case of MX28, write only CTRL0 in case of MX23 due
- * to the difference in register layout. It is utterly
- * essential that the XFER_SIZE register is written on
- * a per-descriptor basis with the same size as is the
- * descriptor!
- */
- dp->cmd.pio_words[0] = ctrl0;
-#ifdef CONFIG_MX28
- dp->cmd.pio_words[1] = 0;
- dp->cmd.pio_words[2] = 0;
- dp->cmd.pio_words[3] = tl;
-#endif
-
- mxs_dma_desc_append(dmach, dp);
-
- dp++;
- }
-
- if (mxs_dma_go(dmach))
- ret = -EINVAL;
-
- /* The data arrived into DRAM, invalidate cache over them */
- if (!write)
- invalidate_dcache_range(dstart, dstart + cache_data_count);
-
- return ret;
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
-{
- struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
- struct mxs_ssp_regs *ssp_regs = mxs_slave->regs;
- int len = bitlen / 8;
- char dummy;
- int write = 0;
- char *data = NULL;
- int dma = 1;
-
- if (bitlen == 0) {
- if (flags & SPI_XFER_END) {
- din = (void *)&dummy;
- len = 1;
- } else
- return 0;
- }
-
- /* Half-duplex only */
- if (din && dout)
- return -EINVAL;
- /* No data */
- if (!din && !dout)
- return 0;
-
- if (dout) {
- data = (char *)dout;
- write = 1;
- } else if (din) {
- data = (char *)din;
- write = 0;
- }
-
- /*
- * Check for alignment, if the buffer is aligned, do DMA transfer,
- * PIO otherwise. This is a temporary workaround until proper bounce
- * buffer is in place.
- */
- if (dma) {
- if (((uint32_t)data) & (ARCH_DMA_MINALIGN - 1))
- dma = 0;
- if (((uint32_t)len) & (ARCH_DMA_MINALIGN - 1))
- dma = 0;
- }
-
- if (!dma || (len < MXSSSP_SMALL_TRANSFER)) {
- writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr);
- return mxs_spi_xfer_pio(mxs_slave, data, len, write, flags);
- } else {
- writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set);
- return mxs_spi_xfer_dma(mxs_slave, data, len, write, flags);
- }
-}
--
2.18.0.321.gffc6fa0e3
More information about the U-Boot
mailing list