[U-Boot] [PATCH u-boot v2 00/19] Amlogic Meson cleanup for AXG SoC support
Neil Armstrong
narmstrong at baylibre.com
Mon Nov 26 08:59:33 UTC 2018
Hi Tom,
On 22/11/2018 10:07, Neil Armstrong wrote:
> This patchset will refactor the Amlogic Meson SoC support in order to
> easily add support for the Amlogic AXg SoC family, and later the G12x SoCs.
>
> In order :
> - Cleanup the mach-meson configs
> - Move board support to reference design common boards
> - Move board Kconfig into mach-meson
> - Add AXG pinctrl & clock support
> - Add AXG device tree and mach-meson support
> - Add support for S400 reference design
> - Do a final factorization of the code
> - Add USB boot support in U-boot
>
> At the end of the patches, the board code is lighter and we maintain
> only the reference designs, where each board will differ in the defconfig.
>
> It will be simpler to add custom board support for future boards with
> more changes against the reference designs.
>
> The complete AXG support depends on the :
> - mmc: meson-gx: Add AXG compatible
> - net: designware: add meson meson axg compatible
> patches submitted to the U-Boot mailing list.Hi
Would it be simpler if I send you a pull-request with this patchset and all dependencies ?
Tell me if you have any comments on the patchset and the 2 dependencies !
Thanks,
Neil
>
> Changes since v1:
> - Fixed AXG pinctrl request and AO pin count
> - Fixed tabs/spaces issues on s400 README
>
> Jerome Brunet (12):
> ARM: meson: clean-up platform selection
> configs: meson: remove unnecessary MESON_FDTFILE_SETTING
> board: amlogic: remove p212 derivatives
> board: amlogic: factorise gxbb boards
> ARM: rework amlogic configuration
> configs: meson: change default load addresses
> pinctrl: meson: rework gx pmx function
> pinctrl: meson: select generic pinctrl
> pinctrl: meson: add axg support
> clk: meson: silence debug print
> ARM: meson: rework soc arch file to prepare for new SoC
> ARM: meson: factorize common code out amlogic's boards
>
> Neil Armstrong (7):
> board: amlogic: move khadas-vim2 as q200 ref board
> clk: meson: add static to meson_gates table
> ARM: meson: Add support for AXG family
> ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1
> clk: Add clock driver for AXG
> board: amlogic: add support for S400 board
> ARM: meson: Add boot device discovery
>
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/meson-axg-s400.dts | 554 ++++++
> arch/arm/dts/meson-axg.dtsi | 1589 +++++++++++++++++
> arch/arm/include/asm/arch-meson/axg.h | 52 +
> arch/arm/include/asm/arch-meson/boot.h | 20 +
> arch/arm/include/asm/arch-meson/clock-axg.h | 104 ++
> .../asm/arch-meson/{clock.h => clock-gx.h} | 4 +-
> arch/arm/include/asm/arch-meson/eth.h | 6 +-
> arch/arm/include/asm/arch-meson/gx.h | 1 +
> arch/arm/include/asm/arch-meson/mem.h | 3 +-
> arch/arm/mach-meson/Kconfig | 132 +-
> arch/arm/mach-meson/Makefile | 4 +-
> arch/arm/mach-meson/board-axg.c | 118 ++
> arch/arm/mach-meson/board-common.c | 117 ++
> arch/arm/mach-meson/{board.c => board-gx.c} | 106 +-
> arch/arm/mach-meson/eth.c | 53 -
> arch/arm/mach-meson/sm.c | 1 -
> board/amlogic/khadas-vim/Kconfig | 12 -
> board/amlogic/khadas-vim/MAINTAINERS | 6 -
> board/amlogic/khadas-vim/khadas-vim.c | 57 -
> board/amlogic/khadas-vim2/Kconfig | 12 -
> board/amlogic/libretech-cc/Kconfig | 12 -
> board/amlogic/libretech-cc/MAINTAINERS | 6 -
> board/amlogic/libretech-cc/Makefile | 6 -
> board/amlogic/libretech-cc/libretech-cc.c | 57 -
> board/amlogic/nanopi-k2/Kconfig | 12 -
> board/amlogic/nanopi-k2/MAINTAINERS | 6 -
> board/amlogic/nanopi-k2/Makefile | 7 -
> board/amlogic/nanopi-k2/nanopi-k2.c | 55 -
> board/amlogic/odroid-c2/Kconfig | 12 -
> board/amlogic/odroid-c2/MAINTAINERS | 1 +
> .../README => odroid-c2/README.nanopi-k2} | 0
> .../odroid-c2/{README => README.odroid-c2} | 0
> board/amlogic/odroid-c2/odroid-c2.c | 16 +-
> board/amlogic/p212/Kconfig | 12 -
> .../README => p212/README.khadas-vim} | 0
> .../README => p212/README.libretech-cc} | 0
> board/amlogic/p212/{README => README.p212} | 0
> board/amlogic/p212/p212.c | 16 +-
> .../amlogic/{khadas-vim2 => q200}/MAINTAINERS | 6 +-
> board/amlogic/{khadas-vim => q200}/Makefile | 2 +-
> .../README => q200/README.khadas-vim2} | 0
> board/amlogic/q200/README.q200 | 102 ++
> .../khadas-vim2.c => q200/q200.c} | 14 +-
> board/amlogic/s400/MAINTAINERS | 6 +
> board/amlogic/{khadas-vim2 => s400}/Makefile | 2 +-
> board/amlogic/s400/README | 110 ++
> board/amlogic/s400/s400.c | 21 +
> configs/khadas-vim2_defconfig | 1 -
> configs/khadas-vim_defconfig | 1 -
> configs/libretech-cc_defconfig | 1 -
> configs/nanopi-k2_defconfig | 2 -
> configs/odroid-c2_defconfig | 1 -
> configs/p212_defconfig | 1 -
> configs/s400_defconfig | 38 +
> drivers/clk/Makefile | 2 +-
> drivers/clk/clk_meson.c | 6 +-
> drivers/clk/clk_meson_axg.c | 316 ++++
> drivers/pinctrl/meson/Kconfig | 18 +-
> drivers/pinctrl/meson/Makefile | 3 +
> drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c | 125 ++
> drivers/pinctrl/meson/pinctrl-meson-axg.c | 979 ++++++++++
> drivers/pinctrl/meson/pinctrl-meson-axg.h | 66 +
> drivers/pinctrl/meson/pinctrl-meson-gx-pmx.c | 97 +
> drivers/pinctrl/meson/pinctrl-meson-gx.h | 48 +
> drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 6 +-
> drivers/pinctrl/meson/pinctrl-meson-gxl.c | 6 +-
> drivers/pinctrl/meson/pinctrl-meson.c | 109 +-
> drivers/pinctrl/meson/pinctrl-meson.h | 37 +-
> include/configs/khadas-vim.h | 16 -
> include/configs/khadas-vim2.h | 18 -
> include/configs/libretech-cc.h | 16 -
> .../configs/{meson-gx-common.h => meson64.h} | 49 +-
> include/configs/nanopi-k2.h | 16 -
> include/configs/odroid-c2.h | 16 -
> include/configs/p212.h | 18 -
> include/dt-bindings/clock/axg-aoclkc.h | 26 +
> include/dt-bindings/clock/axg-audio-clkc.h | 94 +
> include/dt-bindings/clock/axg-clkc.h | 76 +
> include/dt-bindings/gpio/meson-axg-gpio.h | 116 ++
> .../reset/amlogic,meson-axg-audio-arb.h | 17 +
> .../reset/amlogic,meson-axg-reset.h | 124 ++
> include/dt-bindings/reset/axg-aoclkc.h | 20 +
> 83 files changed, 5166 insertions(+), 754 deletions(-)
> create mode 100644 arch/arm/dts/meson-axg-s400.dts
> create mode 100644 arch/arm/dts/meson-axg.dtsi
> create mode 100644 arch/arm/include/asm/arch-meson/axg.h
> create mode 100644 arch/arm/include/asm/arch-meson/boot.h
> create mode 100644 arch/arm/include/asm/arch-meson/clock-axg.h
> rename arch/arm/include/asm/arch-meson/{clock.h => clock-gx.h} (98%)
> create mode 100644 arch/arm/mach-meson/board-axg.c
> create mode 100644 arch/arm/mach-meson/board-common.c
> rename arch/arm/mach-meson/{board.c => board-gx.c} (59%)
> delete mode 100644 arch/arm/mach-meson/eth.c
> delete mode 100644 board/amlogic/khadas-vim/Kconfig
> delete mode 100644 board/amlogic/khadas-vim/MAINTAINERS
> delete mode 100644 board/amlogic/khadas-vim/khadas-vim.c
> delete mode 100644 board/amlogic/khadas-vim2/Kconfig
> delete mode 100644 board/amlogic/libretech-cc/Kconfig
> delete mode 100644 board/amlogic/libretech-cc/MAINTAINERS
> delete mode 100644 board/amlogic/libretech-cc/Makefile
> delete mode 100644 board/amlogic/libretech-cc/libretech-cc.c
> delete mode 100644 board/amlogic/nanopi-k2/Kconfig
> delete mode 100644 board/amlogic/nanopi-k2/MAINTAINERS
> delete mode 100644 board/amlogic/nanopi-k2/Makefile
> delete mode 100644 board/amlogic/nanopi-k2/nanopi-k2.c
> delete mode 100644 board/amlogic/odroid-c2/Kconfig
> rename board/amlogic/{nanopi-k2/README => odroid-c2/README.nanopi-k2} (100%)
> rename board/amlogic/odroid-c2/{README => README.odroid-c2} (100%)
> delete mode 100644 board/amlogic/p212/Kconfig
> rename board/amlogic/{khadas-vim/README => p212/README.khadas-vim} (100%)
> rename board/amlogic/{libretech-cc/README => p212/README.libretech-cc} (100%)
> rename board/amlogic/p212/{README => README.p212} (100%)
> rename board/amlogic/{khadas-vim2 => q200}/MAINTAINERS (54%)
> rename board/amlogic/{khadas-vim => q200}/Makefile (85%)
> rename board/amlogic/{khadas-vim2/README => q200/README.khadas-vim2} (100%)
> create mode 100644 board/amlogic/q200/README.q200
> rename board/amlogic/{khadas-vim2/khadas-vim2.c => q200/q200.c} (85%)
> create mode 100644 board/amlogic/s400/MAINTAINERS
> rename board/amlogic/{khadas-vim2 => s400}/Makefile (84%)
> create mode 100644 board/amlogic/s400/README
> create mode 100644 board/amlogic/s400/s400.c
> create mode 100644 configs/s400_defconfig
> create mode 100644 drivers/clk/clk_meson_axg.c
> create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c
> create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg.c
> create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg.h
> create mode 100644 drivers/pinctrl/meson/pinctrl-meson-gx-pmx.c
> create mode 100644 drivers/pinctrl/meson/pinctrl-meson-gx.h
> delete mode 100644 include/configs/khadas-vim.h
> delete mode 100644 include/configs/khadas-vim2.h
> delete mode 100644 include/configs/libretech-cc.h
> rename include/configs/{meson-gx-common.h => meson64.h} (51%)
> delete mode 100644 include/configs/nanopi-k2.h
> delete mode 100644 include/configs/odroid-c2.h
> delete mode 100644 include/configs/p212.h
> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
> create mode 100644 include/dt-bindings/clock/axg-audio-clkc.h
> create mode 100644 include/dt-bindings/clock/axg-clkc.h
> create mode 100644 include/dt-bindings/gpio/meson-axg-gpio.h
> create mode 100644 include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h
> create mode 100644 include/dt-bindings/reset/amlogic,meson-axg-reset.h
> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>
More information about the U-Boot
mailing list