[U-Boot] [PATCH v8 23/31] bmips: enable wap-5813n enet support

[Álvaro Fernández Rojas]

Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
 v8: introduce bcm6368-enet driver

 arch/mips/dts/comtrend,wap-5813n.dts    | 14 ++++++++++++++
 configs/comtrend_wap5813n_ram_defconfig |  8 +++++++-
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/arch/mips/dts/comtrend,wap-5813n.dts b/arch/mips/dts/comtrend,wap-5813n.dts
index bd41dab9f8..7e835b28d2 100644
--- a/arch/mips/dts/comtrend,wap-5813n.dts
+++ b/arch/mips/dts/comtrend,wap-5813n.dts
@@ -54,6 +54,20 @@
 	status = "okay";
 };
 
+&enet {
+	status = "okay";
+
+	port at 4 {
+		compatible = "brcm,enetsw-port";
+		reg = <4>;
+		label = "rgmii";
+		brcm,phy-id = <0xff>;
+		speed = <1000>;
+		full-duplex;
+		bypass-link;
+	};
+};
+
 &gpio0 {
 	status = "okay";
 };
diff --git a/configs/comtrend_wap5813n_ram_defconfig b/configs/comtrend_wap5813n_ram_defconfig
index 987e4c3fbc..fd5107bb7d 100644
--- a/configs/comtrend_wap5813n_ram_defconfig
+++ b/configs/comtrend_wap5813n_ram_defconfig
@@ -25,11 +25,14 @@ CONFIG_CMD_LICENSE=y
 CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_USB=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
 # CONFIG_CMD_MISC is not set
 CONFIG_OF_EMBED=y
 CONFIG_DEFAULT_DEVICE_TREE="comtrend,wap-5813n"
-# CONFIG_NET is not set
+CONFIG_NET_RANDOM_ETHADDR=y
 # CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_BCM6348_IUDMA=y
 CONFIG_DM_GPIO=y
 CONFIG_BCM6345_GPIO=y
 CONFIG_LED=y
@@ -40,6 +43,9 @@ CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_CFI_FLASH=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_BCM6368_ETH=y
 CONFIG_PHY=y
 CONFIG_BCM6368_USBH_PHY=y
 CONFIG_DM_RESET=y
-- 
2.11.0