[U-Boot] [PATCH v8 21/31] net: add support for bcm6368-enet
Álvaro Fernández Rojas
noltari at gmail.com
Mon Nov 26 18:00:29 UTC 2018
Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
v8: introduce bcm6368-enet driver
drivers/net/Kconfig | 8 +
drivers/net/Makefile | 1 +
drivers/net/bcm6368-eth.c | 604 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 613 insertions(+)
create mode 100644 drivers/net/bcm6368-eth.c
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2b7cec8804..7044c6adf3 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -82,6 +82,14 @@ config BCM6348_ETH
help
This driver supports the BCM6348 Ethernet MAC.
+config BCM6368_ETH
+ bool "BCM6368 EMAC support"
+ depends on DM_ETH && ARCH_BMIPS
+ select DMA
+ select MII
+ help
+ This driver supports the BCM6368 Ethernet MAC.
+
config DWC_ETH_QOS
bool "Synopsys DWC Ethernet QOS device support"
depends on DM_ETH
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 2647d4dd23..0dbfa03306 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_ALTERA_TSE) += altera_tse.o
obj-$(CONFIG_AG7XXX) += ag7xxx.o
obj-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
obj-$(CONFIG_BCM6348_ETH) += bcm6348-eth.o
+obj-$(CONFIG_BCM6368_ETH) += bcm6368-eth.o
obj-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
obj-$(CONFIG_DRIVER_AX88180) += ax88180.o
obj-$(CONFIG_BCM_SF2_ETH) += bcm-sf2-eth.o
diff --git a/drivers/net/bcm6368-eth.c b/drivers/net/bcm6368-eth.c
new file mode 100644
index 0000000000..ff2a8b1e78
--- /dev/null
+++ b/drivers/net/bcm6368-eth.c
@@ -0,0 +1,604 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari at gmail.com>
+ *
+ * Derived from linux/drivers/net/ethernet/broadcom/bcm63xx_enet.c:
+ * Copyright (C) 2008 Maxime Bizon <mbizon at freebox.fr>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <dma.h>
+#include <miiphy.h>
+#include <net.h>
+#include <reset.h>
+#include <wait_bit.h>
+#include <asm/io.h>
+
+#define ETH_PORT_STR "brcm,enetsw-port"
+
+#define ETH_ZLEN 60
+#define ETH_TIMEOUT 100
+
+#define ETH_MAX_PORT 8
+#define ETH_RGMII_PORT0 4
+
+/* Port traffic control */
+#define ETH_PTCTRL_REG(x) (0x0 + (x))
+#define ETH_PTCTRL_RXDIS_SHIFT 0
+#define ETH_PTCTRL_RXDIS_MASK (1 << ETH_PTCTRL_RXDIS_SHIFT)
+#define ETH_PTCTRL_TXDIS_SHIFT 1
+#define ETH_PTCTRL_TXDIS_MASK (1 << ETH_PTCTRL_TXDIS_SHIFT)
+
+/* Switch mode register */
+#define ETH_SWMODE_REG 0xb
+#define ETH_SWMODE_FWD_EN_SHIFT 1
+#define ETH_SWMODE_FWD_EN_MASK (1 << ETH_SWMODE_FWD_EN_SHIFT)
+
+/* IMP override Register */
+#define ETH_IMPOV_REG 0xe
+#define ETH_IMPOV_LINKUP_SHIFT 0
+#define ETH_IMPOV_LINKUP_MASK (1 << ETH_IMPOV_LINKUP_SHIFT)
+#define ETH_IMPOV_FDX_SHIFT 1
+#define ETH_IMPOV_FDX_MASK (1 << ETH_IMPOV_FDX_SHIFT)
+#define ETH_IMPOV_100_SHIFT 2
+#define ETH_IMPOV_100_MASK (1 << ETH_IMPOV_100_SHIFT)
+#define ETH_IMPOV_1000_SHIFT 3
+#define ETH_IMPOV_1000_MASK (1 << ETH_IMPOV_1000_SHIFT)
+#define ETH_IMPOV_RXFLOW_SHIFT 4
+#define ETH_IMPOV_RXFLOW_MASK (1 << ETH_IMPOV_RXFLOW_SHIFT)
+#define ETH_IMPOV_TXFLOW_SHIFT 5
+#define ETH_IMPOV_TXFLOW_MASK (1 << ETH_IMPOV_TXFLOW_SHIFT)
+#define ETH_IMPOV_FORCE_SHIFT 7
+#define ETH_IMPOV_FORCE_MASK (1 << ETH_IMPOV_FORCE_SHIFT)
+
+/* Port override Register */
+#define ETH_PORTOV_REG(x) (0x58 + (x))
+#define ETH_PORTOV_LINKUP_SHIFT 0
+#define ETH_PORTOV_LINKUP_MASK (1 << ETH_PORTOV_LINKUP_SHIFT)
+#define ETH_PORTOV_FDX_SHIFT 1
+#define ETH_PORTOV_FDX_MASK (1 << ETH_PORTOV_FDX_SHIFT)
+#define ETH_PORTOV_100_SHIFT 2
+#define ETH_PORTOV_100_MASK (1 << ETH_PORTOV_100_SHIFT)
+#define ETH_PORTOV_1000_SHIFT 3
+#define ETH_PORTOV_1000_MASK (1 << ETH_PORTOV_1000_SHIFT)
+#define ETH_PORTOV_RXFLOW_SHIFT 4
+#define ETH_PORTOV_RXFLOW_MASK (1 << ETH_PORTOV_RXFLOW_SHIFT)
+#define ETH_PORTOV_TXFLOW_SHIFT 5
+#define ETH_PORTOV_TXFLOW_MASK (1 << ETH_PORTOV_TXFLOW_SHIFT)
+#define ETH_PORTOV_ENABLE_SHIFT 6
+#define ETH_PORTOV_ENABLE_MASK (1 << ETH_PORTOV_ENABLE_SHIFT)
+
+/* Port RGMII control register */
+#define ETH_RGMII_CTRL_REG(x) (0x60 + (x))
+#define ETH_RGMII_CTRL_GMII_CLK_EN (1 << 7)
+#define ETH_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
+#define ETH_RGMII_CTRL_MII_MODE_MASK (3 << 4)
+#define ETH_RGMII_CTRL_RGMII_MODE (0 << 4)
+#define ETH_RGMII_CTRL_MII_MODE (1 << 4)
+#define ETH_RGMII_CTRL_RVMII_MODE (2 << 4)
+#define ETH_RGMII_CTRL_TIMING_SEL_EN (1 << 0)
+
+/* Port RGMII timing register */
+#define ENETSW_RGMII_TIMING_REG(x) (0x68 + (x))
+
+/* MDIO control register */
+#define MII_SC_REG 0xb0
+#define MII_SC_EXT_SHIFT 16
+#define MII_SC_EXT_MASK (1 << MII_SC_EXT_SHIFT)
+#define MII_SC_REG_SHIFT 20
+#define MII_SC_PHYID_SHIFT 25
+#define MII_SC_RD_SHIFT 30
+#define MII_SC_RD_MASK (1 << MII_SC_RD_SHIFT)
+#define MII_SC_WR_SHIFT 31
+#define MII_SC_WR_MASK (1 << MII_SC_WR_SHIFT)
+
+/* MDIO data register */
+#define MII_DAT_REG 0xb4
+
+/* Global Management Configuration Register */
+#define ETH_GMCR_REG 0x200
+#define ETH_GMCR_RST_MIB_SHIFT 0
+#define ETH_GMCR_RST_MIB_MASK (1 << ETH_GMCR_RST_MIB_SHIFT)
+
+/* Jumbo control register port mask register */
+#define ETH_JMBCTL_PORT_REG 0x4004
+
+/* Jumbo control mib good frame register */
+#define ETH_JMBCTL_MAXSIZE_REG 0x4008
+
+struct bcm_enetsw_port {
+ bool used;
+ int phy_id;
+
+ bool bypass_link;
+ int force_speed;
+ bool force_duplex_full;
+
+ const char *name;
+};
+
+/* ETH data */
+struct bcm6368_eth_priv {
+ struct udevice *dev;
+ void __iomem *base;
+ /* DMA */
+ struct dma rx_dma;
+ struct dma tx_dma;
+ /* Ports */
+ uint8_t num_ports;
+ struct bcm_enetsw_port used_ports[ETH_MAX_PORT];
+ int sw_port_link[ETH_MAX_PORT];
+ bool rgmii_override;
+ bool rgmii_timing;
+ /* PHY */
+ int phy_id;
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static inline bool bcm_enet_port_is_rgmii(int portid)
+{
+ return portid >= ETH_RGMII_PORT0;
+}
+
+static int bcm6368_mdio_read(struct bcm6368_eth_priv *priv, uint8_t ext,
+ int phy_id, int reg)
+{
+ uint32_t val;
+
+ writel_be(0, priv->base + MII_SC_REG);
+
+ val = MII_SC_RD_MASK |
+ (phy_id << MII_SC_PHYID_SHIFT) |
+ (reg << MII_SC_REG_SHIFT);
+
+ if (ext)
+ val |= MII_SC_EXT_MASK;
+
+ writel_be(val, priv->base + MII_SC_REG);
+ udelay(50);
+
+ return readw_be(priv->base + MII_DAT_REG);
+}
+
+static int bcm6368_mdio_write(struct bcm6368_eth_priv *priv, uint8_t ext,
+ int phy_id, int reg, u16 data)
+{
+ uint32_t val;
+
+ writel_be(0, priv->base + MII_SC_REG);
+
+ val = MII_SC_WR_MASK |
+ (phy_id << MII_SC_PHYID_SHIFT) |
+ (reg << MII_SC_REG_SHIFT);
+
+ if (ext)
+ val |= MII_SC_EXT_MASK;
+
+ val |= data;
+
+ writel_be(val, priv->base + MII_SC_REG);
+ udelay(50);
+
+ return 0;
+}
+
+static int bcm6368_eth_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+ struct bcm6368_eth_priv *priv = dev_get_priv(dev);
+
+ return dma_receive(&priv->rx_dma, (void *)packetp, NULL);
+}
+
+static int bcm6368_eth_send(struct udevice *dev, void *packet, int length)
+{
+ struct bcm6368_eth_priv *priv = dev_get_priv(dev);
+
+ /* reset dma rx channel */
+ dma_disable(&priv->rx_dma);
+ dma_enable(&priv->rx_dma);
+
+ length = max(length, ETH_ZLEN);
+
+ return dma_send(&priv->tx_dma, (void **)packet, length, NULL);
+}
+
+static int bcm6368_eth_adjust_link(struct bcm6368_eth_priv *priv)
+{
+ unsigned int i;
+
+ for (i = 0; i < priv->num_ports; i++) {
+ struct bcm_enetsw_port *port;
+ int val, j, up, advertise, lpa, speed, duplex, media;
+ int external_phy = bcm_enet_port_is_rgmii(i);
+ u8 override;
+
+ port = &priv->used_ports[i];
+ if (!port->used)
+ continue;
+
+ if (port->bypass_link)
+ continue;
+
+ /* dummy read to clear */
+ for (j = 0; j < 2; j++)
+ val = bcm6368_mdio_read(priv, external_phy,
+ port->phy_id, MII_BMSR);
+
+ if (val == 0xffff)
+ continue;
+
+ up = (val & BMSR_LSTATUS) ? 1 : 0;
+ if (!(up ^ priv->sw_port_link[i]))
+ continue;
+
+ priv->sw_port_link[i] = up;
+
+ /* link changed */
+ if (!up) {
+ dev_info(&priv->pdev->dev, "link DOWN on %s\n",
+ port->name);
+ writeb_be(ETH_PORTOV_ENABLE_MASK,
+ priv->base + ETH_PORTOV_REG(i));
+ writeb_be(ETH_PTCTRL_RXDIS_MASK |
+ ETH_PTCTRL_TXDIS_MASK,
+ priv->base + ETH_PTCTRL_REG(i));
+ continue;
+ }
+
+ advertise = bcm6368_mdio_read(priv, external_phy,
+ port->phy_id, MII_ADVERTISE);
+
+ lpa = bcm6368_mdio_read(priv, external_phy, port->phy_id,
+ MII_LPA);
+
+ /* figure out media and duplex from advertise and LPA values */
+ media = mii_nway_result(lpa & advertise);
+ duplex = (media & ADVERTISE_FULL) ? 1 : 0;
+
+ if (media & (ADVERTISE_100FULL | ADVERTISE_100HALF))
+ speed = 100;
+ else
+ speed = 10;
+
+ if (val & BMSR_ESTATEN) {
+ advertise = bcm6368_mdio_read(priv, external_phy,
+ port->phy_id, MII_CTRL1000);
+
+ lpa = bcm6368_mdio_read(priv, external_phy,
+ port->phy_id, MII_STAT1000);
+
+ if (advertise & (ADVERTISE_1000FULL | ADVERTISE_1000HALF)
+ && lpa & (LPA_1000FULL | LPA_1000HALF)) {
+ speed = 1000;
+ duplex = (lpa & LPA_1000FULL);
+ }
+ }
+
+ pr_alert("link UP on %s, %dMbps, %s-duplex\n",
+ port->name, speed, duplex ? "full" : "half");
+
+ override = ETH_PORTOV_ENABLE_MASK |
+ ETH_PORTOV_LINKUP_MASK;
+
+ if (speed == 1000)
+ override |= ETH_PORTOV_1000_MASK;
+ else if (speed == 100)
+ override |= ETH_PORTOV_100_MASK;
+ if (duplex)
+ override |= ETH_PORTOV_FDX_MASK;
+
+ writeb_be(override, priv->base + ETH_PORTOV_REG(i));
+ writeb_be(0, priv->base + ETH_PTCTRL_REG(i));
+ }
+
+ return 0;
+}
+
+static int bcm6368_eth_start(struct udevice *dev)
+{
+ struct bcm6368_eth_priv *priv = dev_get_priv(dev);
+ int i;
+ u32 val;
+
+ /* disable all ports */
+ for (i = 0; i < priv->num_ports; i++) {
+ writeb_be(ETH_PORTOV_ENABLE_MASK,
+ priv->base + ETH_PORTOV_REG(i));
+ writeb_be(ETH_PTCTRL_RXDIS_MASK |
+ ETH_PTCTRL_TXDIS_MASK,
+ priv->base + ETH_PTCTRL_REG(i));
+
+ priv->sw_port_link[i] = 0;
+ }
+
+ /* enable external ports */
+ for (i = ETH_RGMII_PORT0; i < priv->num_ports; i++) {
+ u8 rgmii_ctrl;
+
+ if (!priv->used_ports[i].used)
+ continue;
+
+ rgmii_ctrl = readb_be(priv->base + ETH_RGMII_CTRL_REG(i));
+ rgmii_ctrl |= ETH_RGMII_CTRL_GMII_CLK_EN;
+ if (priv->rgmii_override)
+ rgmii_ctrl |= ETH_RGMII_CTRL_MII_OVERRIDE_EN;
+ if (priv->rgmii_timing)
+ rgmii_ctrl |= ETH_RGMII_CTRL_TIMING_SEL_EN;
+ writeb_be(rgmii_ctrl, priv->base + ETH_RGMII_CTRL_REG(i));
+ }
+
+ /* reset mib */
+ val = readb_be(priv->base + ETH_GMCR_REG);
+ val |= ETH_GMCR_RST_MIB_MASK;
+ writeb_be(val, priv->base + ETH_GMCR_REG);
+ mdelay(1);
+ val &= ~ETH_GMCR_RST_MIB_MASK;
+ writeb_be(val, priv->base + ETH_GMCR_REG);
+ mdelay(1);
+
+ /* force CPU port state */
+ val = readb_be(priv->base + ETH_IMPOV_REG);
+ val |= ETH_IMPOV_FORCE_MASK | ETH_IMPOV_LINKUP_MASK;
+ writeb_be(val, priv->base + ETH_IMPOV_REG);
+
+ /* enable switch forward engine */
+ val = readb_be(priv->base + ETH_SWMODE_REG);
+ val |= ETH_SWMODE_FWD_EN_MASK;
+ writeb_be(val, priv->base + ETH_SWMODE_REG);
+
+ /* enable jumbo on all ports */
+ writel_be(0x1ff, priv->base + ETH_JMBCTL_PORT_REG);
+ writew_be(9728, priv->base + ETH_JMBCTL_MAXSIZE_REG);
+
+ /* enable dma rx channel */
+ dma_enable(&priv->rx_dma);
+
+ /* enable dma tx channel */
+ dma_enable(&priv->tx_dma);
+
+ /* apply override config for bypass_link ports here. */
+ for (i = 0; i < priv->num_ports; i++) {
+ struct bcm_enetsw_port *port;
+ u8 override;
+ port = &priv->used_ports[i];
+ if (!port->used)
+ continue;
+
+ if (!port->bypass_link)
+ continue;
+
+ override = ETH_PORTOV_ENABLE_MASK |
+ ETH_PORTOV_LINKUP_MASK;
+
+ switch (port->force_speed) {
+ case 1000:
+ override |= ETH_PORTOV_1000_MASK;
+ break;
+ case 100:
+ override |= ETH_PORTOV_100_MASK;
+ break;
+ case 10:
+ break;
+ default:
+ pr_warn("invalid forced speed on port %s: assume 10\n",
+ port->name);
+ break;
+ }
+
+ if (port->force_duplex_full)
+ override |= ETH_PORTOV_FDX_MASK;
+
+ writeb_be(override, priv->base + ETH_PORTOV_REG(i));
+ writeb_be(0, priv->base + ETH_PTCTRL_REG(i));
+ }
+
+ bcm6368_eth_adjust_link(priv);
+
+ return 0;
+}
+
+static void bcm6368_eth_stop(struct udevice *dev)
+{
+ struct bcm6368_eth_priv *priv = dev_get_priv(dev);
+
+ /* disable dma rx channel */
+ dma_disable(&priv->rx_dma);
+
+ /* disable dma tx channel */
+ dma_disable(&priv->tx_dma);
+}
+
+static const struct eth_ops bcm6368_eth_ops = {
+ .recv = bcm6368_eth_recv,
+ .send = bcm6368_eth_send,
+ .start = bcm6368_eth_start,
+ .stop = bcm6368_eth_stop,
+};
+
+static const struct udevice_id bcm6368_eth_ids[] = {
+ { .compatible = "brcm,bcm6368-enet", },
+ { /* sentinel */ }
+};
+
+static bool bcm6368_phy_is_external(struct bcm6368_eth_priv *priv,
+ int phy_id)
+{
+ uint8_t i;
+
+ for (i = 0; i < priv->num_ports; ++i) {
+ if (!priv->used_ports[i].used)
+ continue;
+ if (priv->used_ports[i].phy_id == phy_id)
+ return bcm_enet_port_is_rgmii(i);
+ }
+
+ return true;
+}
+
+static int bcm6368_mii_mdio_read(struct mii_dev *bus, int addr, int devaddr,
+ int reg)
+{
+ struct bcm6368_eth_priv *priv = bus->priv;
+ bool ext = bcm6368_phy_is_external(priv, addr);
+
+ return bcm6368_mdio_read(priv, ext, addr, reg);
+}
+
+static int bcm6368_mii_mdio_write(struct mii_dev *bus, int addr, int devaddr,
+ int reg, u16 data)
+{
+ struct bcm6368_eth_priv *priv = bus->priv;
+ bool ext = bcm6368_phy_is_external(priv, addr);
+
+ return bcm6368_mdio_write(priv, ext, addr, reg, data);
+}
+
+static int bcm6368_mdio_init(const char *name, struct bcm6368_eth_priv *priv)
+{
+ struct mii_dev *bus;
+
+ bus = mdio_alloc();
+ if (!bus) {
+ pr_err("%s: failed to allocate MDIO bus\n", __func__);
+ return -ENOMEM;
+ }
+
+ bus->read = bcm6368_mii_mdio_read;
+ bus->write = bcm6368_mii_mdio_write;
+ bus->priv = priv;
+ snprintf(bus->name, sizeof(bus->name), "%s", name);
+
+ return mdio_register(bus);
+}
+
+static int bcm6368_eth_probe(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct bcm6368_eth_priv *priv = dev_get_priv(dev);
+ void *blob = (void *)gd->fdt_blob;
+ fdt_addr_t addr;
+ int node = dev_of_offset(dev);
+ int ret, i;
+ unsigned int num_ports;
+
+ /* get base address */
+ addr = devfdt_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ /* get number of ports */
+ num_ports = fdtdec_get_uint(gd->fdt_blob, node, "brcm,num-ports",
+ ETH_MAX_PORT);
+ if (!num_ports || num_ports > ETH_MAX_PORT)
+ return -EINVAL;
+
+ /* get dma channels */
+ ret = dma_get_by_name(dev, "tx", &priv->tx_dma);
+ if (ret)
+ return -EINVAL;
+
+ ret = dma_get_by_name(dev, "rx", &priv->rx_dma);
+ if (ret)
+ return -EINVAL;
+
+ /* try to enable clocks */
+ for (i = 0; ; i++) {
+ struct clk clk;
+ int ret;
+
+ ret = clk_get_by_index(dev, i, &clk);
+ if (ret < 0)
+ break;
+ if (clk_enable(&clk))
+ pr_err("failed to enable clock %d\n", i);
+ clk_free(&clk);
+ }
+
+ /* try to perform resets */
+ for (i = 0; ; i++) {
+ struct reset_ctl reset;
+ int ret;
+
+ ret = reset_get_by_index(dev, i, &reset);
+ if (ret < 0)
+ break;
+ if (reset_deassert(&reset))
+ pr_err("failed to deassert reset %d\n", i);
+ reset_free(&reset);
+ }
+
+ /* set priv data */
+ priv->dev = dev;
+
+ priv->base = ioremap(addr, 0);
+ pdata->iobase = (phys_addr_t) priv->base;
+
+ priv->num_ports = num_ports;
+
+ if (fdtdec_get_bool(gd->fdt_blob, i, "brcm,rgmii-override"))
+ priv->rgmii_override = true;
+ if (fdtdec_get_bool(gd->fdt_blob, i, "brcm,rgmii-timing"))
+ priv->rgmii_timing = true;
+
+ /* get ports */
+ for (i = fdt_first_subnode(blob, node);
+ i > 0;
+ i = fdt_next_subnode(blob, i)) {
+ const char *comp;
+ const char *label;
+ unsigned int p;
+ int phy_id;
+ int speed;
+
+ comp = fdt_getprop(blob, i, "compatible", NULL);
+ if (!comp || memcmp(comp, ETH_PORT_STR, sizeof(ETH_PORT_STR)))
+ continue;
+
+ p = fdtdec_get_uint(gd->fdt_blob, i, "reg",
+ ETH_MAX_PORT);
+ if (p >= num_ports)
+ return -EINVAL;
+
+ label = fdt_getprop(blob, i, "label", NULL);
+ if (!label) {
+ debug("%s: node %s has no label\n", __func__,
+ fdt_get_name(blob, i, NULL));
+ return -EINVAL;
+ }
+
+ phy_id = fdtdec_get_int(gd->fdt_blob, i, "brcm,phy-id", -1);
+
+ priv->used_ports[p].used = true;
+ priv->used_ports[p].name = label;
+ priv->used_ports[p].phy_id = phy_id;
+
+ if (fdtdec_get_bool(gd->fdt_blob, i, "full-duplex"))
+ priv->used_ports[p].force_duplex_full = true;
+ if (fdtdec_get_bool(gd->fdt_blob, i, "bypass-link"))
+ priv->used_ports[p].bypass_link = true;
+ speed = fdtdec_get_int(gd->fdt_blob, i, "speed", 0);
+ if (speed)
+ priv->used_ports[p].force_speed = speed;
+ }
+
+ /* init mii bus */
+ ret = bcm6368_mdio_init(dev->name, priv);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+U_BOOT_DRIVER(bcm6368_eth) = {
+ .name = "bcm6368_eth",
+ .id = UCLASS_ETH,
+ .of_match = bcm6368_eth_ids,
+ .ops = &bcm6368_eth_ops,
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+ .priv_auto_alloc_size = sizeof(struct bcm6368_eth_priv),
+ .probe = bcm6368_eth_probe,
+};
--
2.11.0
More information about the U-Boot
mailing list