[U-Boot] [PATCH v8 30/31] bmips: bcm6318: add support for bcm6368-enet

[Álvaro Fernández Rojas]

Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
 v8: introduce bcm6368-enet driver

 arch/mips/dts/brcm,bcm6318.dtsi           | 19 +++++++++++++++++++
 include/dt-bindings/clock/bcm6318-clock.h | 11 +++++++++++
 2 files changed, 30 insertions(+)

diff --git a/arch/mips/dts/brcm,bcm6318.dtsi b/arch/mips/dts/brcm,bcm6318.dtsi
index d04b7cbb01..d678dab242 100644
--- a/arch/mips/dts/brcm,bcm6318.dtsi
+++ b/arch/mips/dts/brcm,bcm6318.dtsi
@@ -190,6 +190,25 @@
 			status = "disabled";
 		};
 
+		enet: ethernet at 10080000 {
+			compatible = "brcm,bcm6368-enet";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x10080000 0x8000>;
+			clocks = <&periph_clk BCM6318_CLK_ROBOSW250>,
+				 <&periph_clk BCM6318_CLK_ROBOSW025>,
+				 <&ubus_clk BCM6318_UCLK_ROBOSW>;
+			resets = <&periph_rst BCM6318_RST_ENETSW>,
+				 <&periph_rst BCM6318_RST_EPHY>;
+			dmas = <&iudma BCM6318_DMA_ENETSW_RX>,
+			       <&iudma BCM6318_DMA_ENETSW_TX>;
+			dma-names = "rx",
+				    "tx";
+			brcm,num-ports = <5>;
+
+			status = "disabled";
+		};
+
 		iudma: dma-controller at 10088000 {
 			compatible = "brcm,bcm6368-iudma";
 			reg = <0x10088000 0x80>,
diff --git a/include/dt-bindings/clock/bcm6318-clock.h b/include/dt-bindings/clock/bcm6318-clock.h
index d5e13c5c2d..3f10448cef 100644
--- a/include/dt-bindings/clock/bcm6318-clock.h
+++ b/include/dt-bindings/clock/bcm6318-clock.h
@@ -33,4 +33,15 @@
 #define BCM6318_CLK_AFE		29
 #define BCM6318_CLK_QPROC	30
 
+#define BCM6318_UCLK_ADSL	0
+#define BCM6318_UCLK_ARB	1
+#define BCM6318_UCLK_MIPS	2
+#define BCM6318_UCLK_PCIE	3
+#define BCM6318_UCLK_PERIPH	4
+#define BCM6318_UCLK_PHYMIPS	5
+#define BCM6318_UCLK_ROBOSW	6
+#define BCM6318_UCLK_SAR	7
+#define BCM6318_UCLK_SDR	8
+#define BCM6318_UCLK_USB	9
+
 #endif /* __DT_BINDINGS_CLOCK_BCM6318_H */
-- 
2.11.0