[U-Boot] [PATCH 2/2] net: phy: Add gmiitorgmii converter support
Siva Durga Prasad Paladugu
siva.durga.paladugu at xilinx.com
Tue Nov 27 06:19:11 UTC 2018
This patch adds support for gmiitorgmii converter.
This converter sits between the MAC and the external phy
MAC <==> GMII2RGMII <==> RGMII_PHY.
The ethernet driver probes this bridge and this bridge driver
probes real phy driver and invokes the real phy functionalities
as requested. This bridge just needs to be configured based on
real phy negotiated speed and duplex.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
drivers/net/phy/Kconfig | 7 +++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/phy.c | 41 ++++++++++++++
drivers/net/phy/xilinx_gmii2rgmii.c | 103 ++++++++++++++++++++++++++++++++++++
include/phy.h | 6 +++
5 files changed, 158 insertions(+)
create mode 100644 drivers/net/phy/xilinx_gmii2rgmii.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 3dc0822..a68e167 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -217,6 +217,13 @@ config PHY_VITESSE
config PHY_XILINX
bool "Xilinx Ethernet PHYs support"
+config PHY_XILINX_GMII2RGMII
+ bool "Xilinx GMII to RGMII Ethernet PHYs support"
+ help
+ This adds support for Xilinx GMII to RGMII IP core. This IP acts
+ as bridge between MAC connected over GMII and external phy that
+ is connected over RGMII interface.
+
config PHY_FIXED
bool "Fixed-Link PHY"
depends on DM_ETH
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 555da83..76b6197 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_PHY_SMSC) += smsc.o
obj-$(CONFIG_PHY_TERANETICS) += teranetics.o
obj-$(CONFIG_PHY_TI) += ti.o
obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o
+obj-$(CONFIG_PHY_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
obj-$(CONFIG_PHY_VITESSE) += vitesse.o
obj-$(CONFIG_PHY_MSCC) += mscc.o
obj-$(CONFIG_PHY_FIXED) += fixed.o
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 3cb2785..d02c4d8 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -528,6 +528,9 @@ int phy_init(void)
#ifdef CONFIG_PHY_FIXED
phy_fixed_init();
#endif
+#ifdef CONFIG_PHY_XILINX_GMII2RGMII
+ phy_xilinx_gmii2rgmii_init();
+#endif
return 0;
}
@@ -875,6 +878,41 @@ void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev)
debug("%s connected to %s\n", dev->name, phydev->drv->name);
}
+#ifdef CONFIG_PHY_XILINX_GMII2RGMII
+#ifdef CONFIG_DM_ETH
+static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
+ struct udevice *dev,
+ phy_interface_t interface)
+#else
+static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
+ struct eth_device *dev,
+ phy_interface_t interface)
+#endif
+{
+ struct phy_device *phydev = NULL;
+ int sn = dev_of_offset(dev);
+ int off;
+
+ while (sn > 0) {
+ off = fdt_node_offset_by_compatible(gd->fdt_blob, sn,
+ "xlnx,gmii-to-rgmii-1.0");
+ if (off > 0) {
+ phydev = phy_device_create(bus,
+ off, PHY_GMII2RGMII_ID,
+ interface);
+ break;
+ }
+ if (off == -FDT_ERR_NOTFOUND)
+ sn = fdt_first_subnode(gd->fdt_blob, sn);
+ else
+ printf("%s: Error finding compat string:%d\n",
+ __func__, off);
+ }
+
+ return phydev;
+}
+#endif
+
#ifdef CONFIG_PHY_FIXED
#ifdef CONFIG_DM_ETH
static struct phy_device *phy_connect_fixed(struct mii_dev *bus,
@@ -920,6 +958,9 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr,
#ifdef CONFIG_PHY_FIXED
phydev = phy_connect_fixed(bus, dev, interface);
#endif
+#ifdef CONFIG_PHY_XILINX_GMII2RGMII
+ phydev = phy_connect_gmii2rgmii(bus, dev, interface);
+#endif
if (!phydev)
phydev = phy_find_by_mask(bus, 1 << addr, interface);
diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c
new file mode 100644
index 0000000..aa4ce86
--- /dev/null
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx GMII2RGMII phy driver
+ *
+ * Copyright (C) 2018 Xilinx, Inc.
+ */
+
+#include <dm.h>
+#include <phy.h>
+#include <config.h>
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ZYNQ_GMII2RGMII_REG 0x10
+#define ZYNQ_GMII2RGMII_SPEED_MASK (BMCR_SPEED1000 | BMCR_SPEED100)
+
+static int xilinxgmiitorgmii_config(struct phy_device *phydev)
+{
+ struct phy_device *ext_phydev = phydev->priv;
+
+ debug("%s\n", __func__);
+ if (ext_phydev->drv->config)
+ ext_phydev->drv->config(ext_phydev);
+
+ return 0;
+}
+
+static int xilinxgmiitorgmii_startup(struct phy_device *phydev)
+{
+ u16 val = 0;
+ struct phy_device *ext_phydev = phydev->priv;
+
+ debug("%s\n", __func__);
+ ext_phydev->dev = phydev->dev;
+ if (ext_phydev->drv->startup)
+ ext_phydev->drv->startup(ext_phydev);
+
+ val = phy_read(phydev, phydev->addr, ZYNQ_GMII2RGMII_REG);
+ val &= ~ZYNQ_GMII2RGMII_SPEED_MASK;
+
+ if (ext_phydev->speed == SPEED_1000)
+ val |= BMCR_SPEED1000;
+ else if (ext_phydev->speed == SPEED_100)
+ val |= BMCR_SPEED100;
+
+ phy_write(phydev, phydev->addr, ZYNQ_GMII2RGMII_REG, val |
+ BMCR_FULLDPLX);
+
+ phydev->duplex = ext_phydev->duplex;
+ phydev->speed = ext_phydev->speed;
+ phydev->link = ext_phydev->link;
+
+ return 0;
+}
+
+static int xilinxgmiitorgmii_probe(struct phy_device *phydev)
+{
+ int ofnode = phydev->addr;
+ u32 phy_of_handle;
+ int ext_phyaddr = -1;
+
+ debug("%s\n", __func__);
+
+ /*
+ * Read the phy address again as the one we read in ethernet driver
+ * was overwritten for the purpose of storing the ofnode
+ */
+ phydev->addr = fdtdec_get_int(gd->fdt_blob, ofnode, "reg", -1);
+ phy_of_handle = fdtdec_lookup_phandle(gd->fdt_blob, ofnode,
+ "phy-handle");
+ if (phy_of_handle > 0)
+ ext_phyaddr = fdtdec_get_int(gd->fdt_blob,
+ phy_of_handle,
+ "reg", -1);
+ phydev->priv = phy_find_by_mask(phydev->bus,
+ 1 << ext_phyaddr,
+ phydev->interface);
+
+ debug("%s, gmii2rgmmi:0x%x, extphy:0x%x\n", __func__, phydev->addr,
+ ext_phyaddr);
+
+ phydev->flags |= PHY_FLAG_BROKEN_RESET;
+
+ return 0;
+}
+
+static struct phy_driver gmii2rgmii_driver = {
+ .name = "XILINX GMII2RGMII",
+ .uid = PHY_GMII2RGMII_ID,
+ .mask = 0xffffffff,
+ .features = PHY_GBIT_FEATURES,
+ .probe = xilinxgmiitorgmii_probe,
+ .config = xilinxgmiitorgmii_config,
+ .startup = xilinxgmiitorgmii_startup,
+};
+
+int phy_xilinx_gmii2rgmii_init(void)
+{
+ phy_register(&gmii2rgmii_driver);
+
+ return 0;
+}
diff --git a/include/phy.h b/include/phy.h
index b86fdfb..0485701 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -17,6 +17,11 @@
#include <phy_interface.h>
#define PHY_FIXED_ID 0xa5a55a5a
+/*
+ * There is no actual id for this.
+ * This is just a dummy id for gmii2rgmmi converter.
+ */
+#define PHY_GMII2RGMII_ID 0x5a5a5a5a
#define PHY_MAX_ADDR 32
@@ -240,6 +245,7 @@ int phy_vitesse_init(void);
int phy_xilinx_init(void);
int phy_mscc_init(void);
int phy_fixed_init(void);
+int phy_xilinx_gmii2rgmii_init(void);
int board_phy_config(struct phy_device *phydev);
int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id);
--
2.7.4
More information about the U-Boot
mailing list