[U-Boot] [PATCH 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10

[Marek Vasut]

On 11/28/2018 03:49 PM, Chee, Tien Fong wrote:
> On Tue, 2018-11-27 at 13:07 +0100, Marek Vasut wrote:
>> On 11/27/2018 09:45 AM, Chee, Tien Fong wrote:
>>>
>>> On Mon, 2018-11-26 at 12:15 +0100, Marek Vasut wrote:
>>>>
>>>> On 11/26/2018 10:44 AM, Chee, Tien Fong wrote:
>>>>>
>>>>>
>>>>> On Fri, 2018-11-23 at 13:23 +0100, Marek Vasut wrote:
>>>>>>
>>>>>>
>>>>>> On 11/23/2018 10:19 AM, Chee, Tien Fong wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, 2018-11-21 at 15:11 +0100, Marek Vasut wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On 11/21/2018 11:41 AM, tien.fong.chee at intel.com wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> From: Tien Fong Chee <tien.fong.chee at intel.com>
>>>>>>>>>
>>>>>>>>> This patch adds description on properties about file
>>>>>>>>> name
>>>>>>>>> used
>>>>>>>>> for
>>>>>>>>> both
>>>>>>>>> peripheral bitstream and core bitstream.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com
>>>>>>>>>>
>>>>>>>>> ---
>>>>>>>>>  .../fpga/altera-socfpga-a10-fpga-
>>>>>>>>> mgr.txt           |    6
>>>>>>>>> ++++++
>>>>>>>>>  1 files changed, 6 insertions(+), 0 deletions(-)
>>>>>>>>>
>>>>>>>>> diff --git a/doc/device-tree-bindings/fpga/altera-
>>>>>>>>> socfpga-
>>>>>>>>> a10-
>>>>>>>>> fpga-
>>>>>>>>> mgr.txt b/doc/device-tree-bindings/fpga/altera-socfpga-
>>>>>>>>> a10-
>>>>>>>>> fpga-
>>>>>>>>> mgr.txt
>>>>>>>>> index 2fd8e7a..010322a 100644
>>>>>>>>> --- a/doc/device-tree-bindings/fpga/altera-socfpga-a10-
>>>>>>>>> fpga-
>>>>>>>>> mgr.txt
>>>>>>>>> +++ b/doc/device-tree-bindings/fpga/altera-socfpga-a10-
>>>>>>>>> fpga-
>>>>>>>>> mgr.txt
>>>>>>>>> @@ -7,6 +7,10 @@ Required properties:
>>>>>>>>>                 - The second index is for writing FPGA
>>>>>>>>> configuration data.
>>>>>>>>>  - resets     : Phandle and reset specifier for the
>>>>>>>>> device's
>>>>>>>>> reset.
>>>>>>>>>  - clocks     : Clocks used by the device.
>>>>>>>>> +- altr,bitstream_periph : File name for FPGA
>>>>>>>>> peripheral
>>>>>>>>> raw
>>>>>>>>> binary
>>>>>>>>> which is used
>>>>>>>>> +			  to initialize FPGA IOs, PLL,
>>>>>>>>> IO48
>>>>>>>>> and
>>>>>>>>> DDR.
>>>>>>>>> +- altr,bitstream_core : File name for core raw binary
>>>>>>>>> which
>>>>>>>>> contains FPGA design
>>>>>>>>> +			which is used to program FPGA
>>>>>>>>> CRAM
>>>>>>>>> and
>>>>>>>>> ERAM.
>>>>>>>> bitstream- instead of bitstream_
>>>>>>> Noted.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> btw can we get something that works with full bitstream
>>>>>>>> too ?
>>>>>>> This patchset actually support the full bitstream too,
>>>>>>> unfortunately it
>>>>>>> is blocked by hardware MPFE issue. The patchset for the
>>>>>>> MPFE
>>>>>>> workaround
>>>>>>> would come after this patchset. I would advice to use the
>>>>>>> early
>>>>>>> IO
>>>>>>> release method for the sake of performance.
>>>>>>>
>>>>>>> For details of issue, you can read the from the link https:
>>>>>>> //gi
>>>>>>> thub
>>>>>>> .com
>>>>>>> /altera-opensource/u-boot-
>>>>>>> socfpga/commits/socfpga_v2014.10_arria10_brin
>>>>>>> gup
>>>>>>> FogBugz #410989-6: Masking hardware sequenced warm reset
>>>>>>> for
>>>>>>> logic
>>>>>>> in…  …
>>>>>> Does that work on ES2 ? I don't think so ...
>>>>> Why you think it doesn't work, using early IO or full rbf? The
>>>>> bitstream limitation? What you see from the print out?
>>>> ES2 can only use full RBF, I don't think this is handled in this
>>>> patchset at all.
>>> i did testing the full rbf loading, but in the end i removed that
>>> portion of codes because it stuck in DDR calibration due to MPFE HW
>>> issue. So, i would put back that portion of codes after MPFE HW
>>> workaround. My plan is to let early IO release up 1st.
>> Can you describe that workaround ? The code worked on the A10ES2 kit
>> I
>> have back around v2018.09, so what's the problem ?
>>
>>>
>>> Actually ES2 board also support early IO release, just you need
>>> ACDS
>>> and SOCEDS version 17.1 onward to rebuild your hardware, and
>>> choosing
>>> the early IO release setting inside the tool. We can discuss this
>>> more
>>> if you need our help for early IO release RBFs.
>> I do, otherwise I won't be able to test anything, so make sure this
>> is
>> supported.
> Great, i would send out seprate email discussion with you, and inviting
> our aplication and hardware engineer into the pool.
> 
> By the way, how you get the full rbf or you build it yourself? Do you
> have the hardware design? What are the tools you have? what version?

I'm using the GHRD from altera wiki.

-- 
Best regards,
Marek Vasut