[U-Boot] [PATCH v9 20/28] bmips: enable wap-5813n enet support
Álvaro Fernández Rojas
noltari at gmail.com
Wed Nov 28 18:23:41 UTC 2018
Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
v9: no changes
v8: introduce bcm6368-enet driver
arch/mips/dts/comtrend,wap-5813n.dts | 14 ++++++++++++++
configs/comtrend_wap5813n_ram_defconfig | 8 +++++++-
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/arch/mips/dts/comtrend,wap-5813n.dts b/arch/mips/dts/comtrend,wap-5813n.dts
index bd41dab9f8..7e835b28d2 100644
--- a/arch/mips/dts/comtrend,wap-5813n.dts
+++ b/arch/mips/dts/comtrend,wap-5813n.dts
@@ -54,6 +54,20 @@
status = "okay";
};
+&enet {
+ status = "okay";
+
+ port at 4 {
+ compatible = "brcm,enetsw-port";
+ reg = <4>;
+ label = "rgmii";
+ brcm,phy-id = <0xff>;
+ speed = <1000>;
+ full-duplex;
+ bypass-link;
+ };
+};
+
&gpio0 {
status = "okay";
};
diff --git a/configs/comtrend_wap5813n_ram_defconfig b/configs/comtrend_wap5813n_ram_defconfig
index 987e4c3fbc..fd5107bb7d 100644
--- a/configs/comtrend_wap5813n_ram_defconfig
+++ b/configs/comtrend_wap5813n_ram_defconfig
@@ -25,11 +25,14 @@ CONFIG_CMD_LICENSE=y
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_USB=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_OF_EMBED=y
CONFIG_DEFAULT_DEVICE_TREE="comtrend,wap-5813n"
-# CONFIG_NET is not set
+CONFIG_NET_RANDOM_ETHADDR=y
# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_BCM6348_IUDMA=y
CONFIG_DM_GPIO=y
CONFIG_BCM6345_GPIO=y
CONFIG_LED=y
@@ -40,6 +43,9 @@ CONFIG_FLASH_CFI_DRIVER=y
CONFIG_CFI_FLASH=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_BCM6368_ETH=y
CONFIG_PHY=y
CONFIG_BCM6368_USBH_PHY=y
CONFIG_DM_RESET=y
--
2.11.0
More information about the U-Boot
mailing list