[U-Boot] [PATCH u-boot-marvell v3 04/10] arch/arm/dts: Fix Turris Mox device tree

Stefan Roese sr at denx.de
Thu Nov 29 13:01:24 UTC 2018


On 20.11.18 13:04, Marek Behún wrote:
> DTC issues a warning because #address-cells and #size-cells properties
> are not set in the mdio node.
> Also add ethernet1 alias.
> Also add RTC node.
> Also fix USB3 regulator startup delay time.
> Also fix PCI Express SERDES speed to 5 GHz (this is only cosmetic, the
> speed value is not used byt the comphy driver for PCI Express, but
> should be 5 GHz nonetheless).
> 
> Signed-off-by: Marek Behún <marek.behun at nic.cz>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   arch/arm/dts/armada-3720-turris-mox.dts | 12 +++++++++++-
>   1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts
> index 9c96dd39a9..2a71da21bf 100644
> --- a/arch/arm/dts/armada-3720-turris-mox.dts
> +++ b/arch/arm/dts/armada-3720-turris-mox.dts
> @@ -24,6 +24,7 @@
>   
>   	aliases {
>   		ethernet0 = &eth0;
> +		ethernet1 = &eth1;
>   		i2c0 = &i2c0;
>   		spi0 = &spi0;
>   	};
> @@ -38,12 +39,16 @@
>   		regulator-name = "usb3-vbus";
>   		regulator-min-microvolt = <5000000>;
>   		regulator-max-microvolt = <5000000>;
> +		startup-delay-us = <2000000>;
>   		shutdown-delay-us = <1000000>;
>   		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
>   		regulator-boot-on;
>   	};
>   
>   	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
>   		eth_phy1: ethernet-phy at 1 {
>   			reg = <1>;
>   		};
> @@ -59,7 +64,7 @@
>   
>   	phy1 {
>   		phy-type = <PHY_TYPE_PEX0>;
> -		phy-speed = <PHY_SPEED_2_5G>;
> +		phy-speed = <PHY_SPEED_5G>;
>   	};
>   
>   	phy2 {
> @@ -80,6 +85,11 @@
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&i2c1_pins>;
>   	status = "okay";
> +
> +	rtc at 6f {
> +		compatible = "microchip,mcp7941x";
> +		reg = <0x6f>;
> +	};
>   };
>   
>   &sdhci1 {
> 

Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list