[U-Boot] [PATCH 1/5] arm64: zynqmp: Enable SPL for mini qspi configuration
Michal Simek
michal.simek at xilinx.com
Thu Nov 29 14:39:45 UTC 2018
Wire up mini_qspi SPL with zcu102 for testing purpose.
Normally mini u-boot runs with FSBL/SPL for certain board.
Enabling SPL and configuration from zcu102 helps with testing.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
board/xilinx/zynqmp/zynqmp-mini-qspi | 1 +
configs/xilinx_zynqmp_mini_qspi_defconfig | 4 ++++
2 files changed, 5 insertions(+)
create mode 120000 board/xilinx/zynqmp/zynqmp-mini-qspi
diff --git a/board/xilinx/zynqmp/zynqmp-mini-qspi b/board/xilinx/zynqmp/zynqmp-mini-qspi
new file mode 120000
index 000000000000..5a70cd2f5e13
--- /dev/null
+++ b/board/xilinx/zynqmp/zynqmp-mini-qspi
@@ -0,0 +1 @@
+zynqmp-zcu102-rev1.0
\ No newline at end of file
diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig
index 53766e2e1935..89b81e76658e 100644
--- a/configs/xilinx_zynqmp_mini_qspi_defconfig
+++ b/configs/xilinx_zynqmp_mini_qspi_defconfig
@@ -3,6 +3,7 @@ CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_mini_qspi"
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_TEXT_BASE=0xFFFC0000
CONFIG_ENV_SIZE=0x578
+CONFIG_SPL=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
CONFIG_ZYNQMP_NO_DDR=y
# CONFIG_CMD_ZYNQMP is not set
@@ -43,11 +44,14 @@ CONFIG_CMD_SF=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_MISC is not set
# CONFIG_PARTITIONS is not set
+CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-qspi"
# CONFIG_NET is not set
+CONFIG_SPL_DM=y
# CONFIG_DM_WARN is not set
# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_SPL_DM_SEQ_ALIAS=y
# CONFIG_MMC is not set
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
--
1.9.1
More information about the U-Boot
mailing list