[U-Boot] [PATCH v2 5/6] arm: mvebu: helios4: Enable SPI flash support
Aditya Prayoga
aditya at kobol.io
Fri Nov 30 02:54:58 UTC 2018
Enable SPI flash support under U-Boot and SPL. The ENV size and offset,
ported from U-Boot 2013.01 Marvell version: 2015_T1.0p16
To create U-Boot image for SPI flash, user would need to replace
* CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC with CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
* CONFIG_ENV_IS_IN_MMC with CONFIG_ENV_IS_IN_SPI_FLASH
Signed-off-by: Aditya Prayoga <aditya at kobol.io>
---
v2:
* Move u-boot specific properties into armada-388-helios4-u-boot.dtsi
(Dennis Gilmore)
---
arch/arm/dts/armada-388-helios4-u-boot.dtsi | 10 ++++++++++
configs/helios4_defconfig | 1 -
include/configs/helios4.h | 31 +++++++++++++++++++++++++++++
3 files changed, 41 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/armada-388-helios4-u-boot.dtsi b/arch/arm/dts/armada-388-helios4-u-boot.dtsi
index bd8c6ce..4bc00ae 100644
--- a/arch/arm/dts/armada-388-helios4-u-boot.dtsi
+++ b/arch/arm/dts/armada-388-helios4-u-boot.dtsi
@@ -4,5 +4,15 @@
aliases {
i2c0 = &i2c0;
i2c1 = &i2c1;
+ spi1 = &spi1;
};
};
+
+&spi1 {
+ u-boot,dm-spl;
+};
+
+&w25q32 {
+ status = "okay";
+ u-boot,dm-spl;
+};
diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig
index 53995fe..3bb4622 100644
--- a/configs/helios4_defconfig
+++ b/configs/helios4_defconfig
@@ -6,7 +6,6 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_HELIOS4=y
CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y
-CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL=y
diff --git a/include/configs/helios4.h b/include/configs/helios4.h
index e665340..3157225 100644
--- a/include/configs/helios4.h
+++ b/include/configs/helios4.h
@@ -6,6 +6,8 @@
#ifndef _CONFIG_HELIOS4_H
#define _CONFIG_HELIOS4_H
+#include <linux/sizes.h>
+
/*
* High Level Configuration Options (easy to change)
*/
@@ -23,6 +25,9 @@
/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_BUS 1
+#define CONFIG_SF_DEFAULT_CS 0
+#define CONFIG_SF_DEFAULT_SPEED 104000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
/*
* SDIO/MMC Card Configuration
@@ -43,6 +48,21 @@
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
+/*
+ * SPI Flash configuration for the environment access
+ */
+#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+
+/* Environment in SPI NOR flash */
+#define CONFIG_ENV_SECT_SIZE SZ_64K
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_OFFSET SZ_1M
+#endif
+
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
/* Environment in MMC */
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SECT_SIZE 0x200
@@ -50,6 +70,7 @@
/* stay within first 1M */
#define CONFIG_ENV_OFFSET (SZ_1M - CONFIG_ENV_SIZE)
#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
+#endif
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
@@ -69,7 +90,13 @@
*/
#define SPL_BOOT_SPI_NOR_FLASH 1
#define SPL_BOOT_SDIO_MMC_CARD 2
+
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
+#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH
+#endif
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD
+#endif
/* Defines for SPL */
#define CONFIG_SPL_SIZE (140 << 10)
@@ -88,12 +115,16 @@
#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
/* SPL related SPI defines */
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
#endif
#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
/* SPL related MMC defines */
+#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10)
#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
#ifdef CONFIG_SPL_BUILD
--
2.7.4
More information about the U-Boot
mailing list