[U-Boot] [v1 1/2] armv8: dts: fsl-lx2160a: add sata node support

[Peng Ma]

One lx2160A, there is one SATA 3.0 advanced host controller interface
which is a high-performance SATA solution that delivers comprehensive
and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA
capabilities, in accordance with the serial ATA revision 3.0 of Serial
ATA International Organization.

Signed-off-by: Peng Ma <peng.ma at nxp.com>
---
Depends on:
	- https://patchwork.ozlabs.org/project/uboot/list/?series=72964 
	- https://patchwork.ozlabs.org/project/uboot/list/?series=78759

 arch/arm/dts/fsl-lx2160a-rdb.dts |   16 ++++++++++++++++
 arch/arm/dts/fsl-lx2160a.dtsi    |   37 +++++++++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+), 0 deletions(-)

diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
index c3b3a06..7c4f0e7 100644
--- a/arch/arm/dts/fsl-lx2160a-rdb.dts
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -53,3 +53,19 @@
 &esdhc1 {
 	status = "okay";
 };
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
index c268bd9..c8cab6a 100644
--- a/arch/arm/dts/fsl-lx2160a.dtsi
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -238,4 +238,41 @@
 		bus-range = <0x0 0xff>;
 		ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 	};
+
+	sata0: sata at 3200000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 133 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
+
+	sata1: sata at 3210000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>;
+			interrupts = <0 136 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
+
+	sata2: sata at 3220000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3220000 0x0 0x10000>;
+			interrupts = <0 97 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
+
+	sata3: sata at 3230000 {
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3230000 0x0 0x10000>;
+			interrupts = <0 100 4>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+
+	};
+
 };
-- 
1.7.1