[U-Boot] [PATCH v3] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Fabio Estevam
festevam at gmail.com
Fri Nov 30 11:07:30 UTC 2018
U-Boot binary has grown in such a way that it goes beyond the reserved
area for the environment variables.
Running "saveenv" causes U-Boot to hang because of this overlap.
Fix this problem by increasing the CONFIG_ENV_OFFSET size.
Also, in order to prevent this same problem in the future, use
CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time.
CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare
CONFIG_ENV_OFFSET with its direct value instead.
Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
Changes since v2:
- Use CONFIG_BOARD_SIZE_LIMIT (Stefan)
include/configs/pico-imx7d.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 2bc42a0..25b1a51 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -134,7 +134,10 @@
/* FLASH and environment organization */
#define CONFIG_ENV_SIZE SZ_8K
-#define CONFIG_ENV_OFFSET (8 * SZ_64K)
+#define CONFIG_ENV_OFFSET 786432
+/* Detect overlap between U-Boot image and environment area in build-time */
+#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
+
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_MMC_ENV_DEV 0
--
2.7.4
More information about the U-Boot
mailing list