[U-Boot] [PATCH v2] DW SPI: Allow to overload the management of the external CS

[Gregory CLEMENT]

Hi Jagan,
 
 On mar., oct. 09 2018, Gregory CLEMENT <gregory.clement at bootlin.com> wrote:

> On some platforms, as the Ocelot ones, when wanting to control the CS
> through software, it is not possible to do it through the GPIO
> controller. Indeed, this signal is managed through a dedicated range of
> registers inside the SoC..
>
> By declaring the external_cs_manage function as weak, it is possible to
> manage the CS at platform level and then using the appropriate registers.
>

I sent this v2 nearly 2 months ago and didn't have any objection about
it. So, Could you merge this patch please?

Thanks!

> Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
> ---
> Changelog:
> v1 -> v2
> - Fix ocelot name
>
>  drivers/spi/designware_spi.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
> index d8b73ea326..1f47ea24c8 100644
> --- a/drivers/spi/designware_spi.c
> +++ b/drivers/spi/designware_spi.c
> @@ -334,7 +334,13 @@ static int poll_transfer(struct dw_spi_priv *priv)
>  	return 0;
>  }
>  
> -static void external_cs_manage(struct udevice *dev, bool on)
> +/*
> + * We define external_cs_manage function as 'weak' as some targets
> + * (like MSCC Ocelot) don't control the external CS pin using a GPIO
> + * controller. These SoCs use specific registers to control by
> + * software the SPI pins (and especially the CS).
> + */
> +__weak void external_cs_manage(struct udevice *dev, bool on)
>  {
>  #if defined(CONFIG_DM_GPIO) && !defined(CONFIG_SPL_BUILD)
>  	struct dw_spi_priv *priv = dev_get_priv(dev->parent);
> -- 
> 2.19.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com