[U-Boot] [PATCH v2 3/3] arm: spear: fix enabling of SSP2 clock

[Stefan Roese]

On 31.08.2018 16:28, Quentin Schulz wrote:
> The SSP2 clock is at bit 6 in the register, so the value is 0x40 unlike
> the current 0x70 which enables the clock of UART2, SSP1 and SSP2.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz at bootlin.com>
> ---
> 
> added in v2
> 
> @Stefan: I think you'd want to test the FPGA on x600 again as it's using
> this constant. Having worked on a system close to the x600, I'm guessing
> that it'll work as fine as on my platform with this patch but better be
> sure than sorry.

I don't have easily access to the x600 board right now. Please go ahead
with this patch. I'm now informed about this change and will make some
tests, if I get this board on my desk again.

Acked-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan