[U-Boot] [PATCH v3 12/20] tee: optee: support AVB trusted application
Jens Wiklander
jens.wiklander at linaro.org
Mon Sep 3 14:47:03 UTC 2018
Adds configuration option OPTEE_TA_AVB and a header file describing the
interface to the Android Verified Boot 2.0 (AVB) trusted application
provided by OP-TEE.
Tested-by: Igor Opaniuk <igor.opaniuk at linaro.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk at linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander at linaro.org>
---
MAINTAINERS | 1 +
drivers/tee/optee/Kconfig | 16 +++++++++++++
drivers/tee/tee-uclass.c | 24 +++++++++++++++++++
include/tee.h | 38 ++++++++++++++++++++++++++++++
include/tee/optee_ta_avb.h | 48 ++++++++++++++++++++++++++++++++++++++
5 files changed, 127 insertions(+)
create mode 100644 include/tee/optee_ta_avb.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 7458c606ee92..cb36c45d74ea 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -576,6 +576,7 @@ M: Jens Wiklander <jens.wiklander at linaro.org>
S: Maintained
F: drivers/tee/
F: include/tee.h
+F: include/tee/
UBI
M: Kyungmin Park <kmpark at infradead.org>
diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig
index 7484e6fea114..dbfa7846a30f 100644
--- a/drivers/tee/optee/Kconfig
+++ b/drivers/tee/optee/Kconfig
@@ -9,3 +9,19 @@ config OPTEE
mechanism. This driver can request services from OP-TEE, but also
handle Remote Procedure Calls (RPC) from OP-TEE needed to
execute a service. For more information see: https://www.op-tee.org
+
+if OPTEE
+
+menu "OP-TEE options"
+
+config OPTEE_TA_AVB
+ bool "Support AVB TA"
+ default y
+ help
+ Enables support for the AVB Trusted Application (TA) in OP-TEE.
+ The TA can support the "avb" subcommands "read_rb", "write"rb"
+ and "is_unlocked".
+
+endmenu
+
+endif
diff --git a/drivers/tee/tee-uclass.c b/drivers/tee/tee-uclass.c
index 1bee54ebf4af..abb88c0fee53 100644
--- a/drivers/tee/tee-uclass.c
+++ b/drivers/tee/tee-uclass.c
@@ -207,3 +207,27 @@ UCLASS_DRIVER(tee) = {
.pre_probe = tee_pre_probe,
.pre_remove = tee_pre_remove,
};
+
+void tee_optee_ta_uuid_from_octets(struct tee_optee_ta_uuid *d,
+ const u8 s[TEE_UUID_LEN])
+{
+ d->time_low = ((u32)s[0] << 24) | ((u32)s[1] << 16) |
+ ((u32)s[2] << 8) | s[3],
+ d->time_mid = ((u32)s[4] << 8) | s[5];
+ d->time_hi_and_version = ((u32)s[6] << 8) | s[7];
+ memcpy(d->clock_seq_and_node, s + 8, sizeof(d->clock_seq_and_node));
+}
+
+void tee_optee_ta_uuid_to_octets(u8 d[TEE_UUID_LEN],
+ const struct tee_optee_ta_uuid *s)
+{
+ d[0] = s->time_low >> 24;
+ d[1] = s->time_low >> 16;
+ d[2] = s->time_low >> 8;
+ d[3] = s->time_low;
+ d[4] = s->time_mid >> 8;
+ d[5] = s->time_mid;
+ d[6] = s->time_hi_and_version >> 8;
+ d[7] = s->time_hi_and_version;
+ memcpy(d + 8, s->clock_seq_and_node, sizeof(s->clock_seq_and_node));
+}
diff --git a/include/tee.h b/include/tee.h
index b86dbec257b4..98b1c9cc693a 100644
--- a/include/tee.h
+++ b/include/tee.h
@@ -49,6 +49,22 @@
#define TEE_ORIGIN_TRUSTED_APP 0x00000004
struct udevice;
+
+/**
+ * struct tee_optee_ta_uuid - OP-TEE Trusted Application (TA) UUID format
+ *
+ * Used to identify an OP-TEE TA and define suitable to initialize structs
+ * of this format is distributed with the interface of the TA. The
+ * individual fields of this struct doesn't have any special meaning in
+ * OP-TEE. See RFC4122 for details on the format.
+ */
+struct tee_optee_ta_uuid {
+ u32 time_low;
+ u16 time_mid;
+ u16 time_hi_and_version;
+ u8 clock_seq_and_node[8];
+};
+
/**
* struct tee_shm - memory shared with the TEE
* @dev: The TEE device
@@ -333,4 +349,26 @@ int tee_close_session(struct udevice *dev, u32 session);
int tee_invoke_func(struct udevice *dev, struct tee_invoke_arg *arg,
uint num_param, struct tee_param *param);
+/**
+ * tee_optee_ta_uuid_from_octets() - Converts to struct tee_optee_ta_uuid
+ * @d: Destination struct
+ * @s: Source UUID octets
+ *
+ * Conversion to a struct tee_optee_ta_uuid represantion from binary octet
+ * representation.
+ */
+void tee_optee_ta_uuid_from_octets(struct tee_optee_ta_uuid *d,
+ const u8 s[TEE_UUID_LEN]);
+
+/**
+ * tee_optee_ta_uuid_to_octets() - Converts from struct tee_optee_ta_uuid
+ * @d: Destination UUID octets
+ * @s: Source struct
+ *
+ * Conversion from a struct tee_optee_ta_uuid represantion to binary octet
+ * representation.
+ */
+void tee_optee_ta_uuid_to_octets(u8 d[TEE_UUID_LEN],
+ const struct tee_optee_ta_uuid *s);
+
#endif /* __TEE_H */
diff --git a/include/tee/optee_ta_avb.h b/include/tee/optee_ta_avb.h
new file mode 100644
index 000000000000..074386af19a1
--- /dev/null
+++ b/include/tee/optee_ta_avb.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/* Copyright (c) 2018, Linaro Limited */
+
+#ifndef __TA_AVB_H
+#define __TA_AVB_H
+
+#define TA_AVB_UUID { 0x023f8f1a, 0x292a, 0x432b, \
+ { 0x8f, 0xc4, 0xde, 0x84, 0x71, 0x35, 0x80, 0x67 } }
+
+#define TA_AVB_MAX_ROLLBACK_LOCATIONS 256
+
+/*
+ * Gets the rollback index corresponding to the given rollback index slot.
+ *
+ * in params[0].value.a: rollback index slot
+ * out params[1].value.a: upper 32 bits of rollback index
+ * out params[1].value.b: lower 32 bits of rollback index
+ */
+#define TA_AVB_CMD_READ_ROLLBACK_INDEX 0
+
+/*
+ * Updates the rollback index corresponding to the given rollback index slot.
+ *
+ * Will refuse to update a slot with a lower value.
+ *
+ * in params[0].value.a: rollback index slot
+ * in params[1].value.a: upper 32 bits of rollback index
+ * in params[1].value.b: lower 32 bits of rollback index
+ */
+#define TA_AVB_CMD_WRITE_ROLLBACK_INDEX 1
+
+/*
+ * Gets the lock state of the device.
+ *
+ * out params[0].value.a: lock state
+ */
+#define TA_AVB_CMD_READ_LOCK_STATE 2
+
+/*
+ * Sets the lock state of the device.
+ *
+ * If the lock state is changed all rollback slots will be reset to 0
+ *
+ * in params[0].value.a: lock state
+ */
+#define TA_AVB_CMD_WRITE_LOCK_STATE 3
+
+#endif /* __TA_AVB_H */
--
2.17.1
More information about the U-Boot
mailing list