[U-Boot] [PATCH 02/13] pico-imx6ul: Convert to SPL

[Michael Nazzareno Trimarchi]

Hi Fabio

On Tue, Sep 4, 2018 at 2:50 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> On Tue, Sep 4, 2018 at 9:41 AM, Michael Nazzareno Trimarchi
> <michael at amarulasolutions.com> wrote:
>
> > Well, yes and no. Not all the bits can be writable according to the
> > documentation if I remember and if the value you
> > put are the value after reset and if I remember are all the clock on,
> > you need to explain better you you write them.
>
> 0xFFFFFFFF is the value of the CCGR registers after power on reset.
>
> It is true that some fields are marked as "reserved", but I don't see
> the issue in writing '11' to them since this is the POR value.
>
> Again, I am not doing anything different than the DCD table in this aspect.

Ok, if you resend with the change discussed I'm fine with it. The reason that
I'm trying to make much clean is just because I get random problem in the past
just for few bits ;)

Michael

-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |