[U-Boot] [PATCH v7 09/11] configs: am57xx_evm: Enable DM_USB and DM_USB_DEV
Jean-Jacques Hiblot
jjhiblot at ti.com
Tue Sep 4 13:56:13 UTC 2018
Enable DM_USB and DM_USB_DEV for AM57xx based boards.
Signed-off-by: Vignesh R <vigneshr at ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---
Changes in v7:
- Fixed build issue "multiple definition of `usb_gadget_handle_interrupts'"
Changes in v6:
- AM57 configs: enable DM_USB and DM_USB_DEV. Use DWC3_GENERIC in place of
DWC3_OF_SIMPLE. disable non DM USB options
Changes in v5:
- Rebased on latest u-boot
- Removed patches that have already been merged
Changes in v4:
- Remove dependency on MISC
- Remove omap specific glue layer and use dwc3-of-simple glue layer
Changes in v3: None
Changes in v2:
- Enable DM_USB in am57xx_evm_defconfig. USB3 (super speed) is supported.
board/ti/am57xx/board.c | 5 ++---
configs/am57xx_evm_defconfig | 10 +++++++---
configs/am57xx_hs_evm_defconfig | 10 +++++++---
3 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 8c24d17..ffe2a54 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -883,7 +883,8 @@ int spl_start_uboot(void)
}
#endif
-#ifdef CONFIG_USB_DWC3
+#if defined(CONFIG_USB_DWC3) && \
+ !(defined(CONFIG_DM_USB) && defined(CONFIG_DM_USB_DEV))
static struct dwc3_device usb_otg_ss2 = {
.maximum_speed = USB_SPEED_HIGH,
.base = DRA7_USB_OTG_SS2_BASE,
@@ -912,9 +913,7 @@ int usb_gadget_handle_interrupts(int index)
return 0;
}
-#endif /* CONFIG_USB_DWC3 */
-#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
int board_usb_init(int index, enum usb_init_type init)
{
enable_usb_clocks(index);
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index 07ab01e..ecfdb31 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -50,6 +50,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=1
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
+CONFIG_MISC=y
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_DM_SPI_FLASH=y
@@ -61,6 +62,9 @@ CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_DRIVER_TI_CPSW=y
CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_PIPE3_PHY=y
+CONFIG_OMAP_USB2_PHY=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_PALMAS=y
CONFIG_DM_REGULATOR=y
@@ -71,13 +75,13 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_TI_QSPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_DEV=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_OMAP_USB_PHY=y
+CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
index 0522c10..f777ede 100644
--- a/configs/am57xx_hs_evm_defconfig
+++ b/configs/am57xx_hs_evm_defconfig
@@ -53,6 +53,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=1
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
+CONFIG_MISC=y
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_DM_SPI_FLASH=y
@@ -64,6 +65,9 @@ CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_DRIVER_TI_CPSW=y
CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_PIPE3_PHY=y
+CONFIG_OMAP_USB2_PHY=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_PALMAS=y
CONFIG_DM_REGULATOR=y
@@ -74,13 +78,13 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_TI_QSPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_DEV=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_DWC3_PHY_OMAP=y
-CONFIG_OMAP_USB_PHY=y
+CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
--
2.7.4
More information about the U-Boot
mailing list