[U-Boot] [PATCH V4 11/32] imx8: add imx-regs header file

[Peng Fan]

Add imx-regs header file to include the register base definition

Signed-off-by: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/include/asm/arch-imx8/imx-regs.h | 46 +++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-imx8/imx-regs.h

diff --git a/arch/arm/include/asm/arch-imx8/imx-regs.h b/arch/arm/include/asm/arch-imx8/imx-regs.h
new file mode 100644
index 0000000000..af0fb5154b
--- /dev/null
+++ b/arch/arm/include/asm/arch-imx8/imx-regs.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8_REGS_H__
+#define __ASM_ARCH_IMX8_REGS_H__
+
+#define LPUART_BASE		0x5A060000
+
+#define GPT1_BASE_ADDR		0x5D140000
+#define SCU_LPUART_BASE		0x33220000
+#define GPIO1_BASE_ADDR		0x5D080000
+#define GPIO2_BASE_ADDR		0x5D090000
+#define GPIO3_BASE_ADDR		0x5D0A0000
+#define GPIO4_BASE_ADDR		0x5D0B0000
+#define GPIO5_BASE_ADDR		0x5D0C0000
+#define GPIO6_BASE_ADDR		0x5D0D0000
+#define GPIO7_BASE_ADDR		0x5D0E0000
+#define GPIO8_BASE_ADDR		0x5D0F0000
+#define LPI2C1_BASE_ADDR	0x5A800000
+#define LPI2C2_BASE_ADDR	0x5A810000
+#define LPI2C3_BASE_ADDR	0x5A820000
+#define LPI2C4_BASE_ADDR	0x5A830000
+#define LPI2C5_BASE_ADDR	0x5A840000
+
+#ifdef CONFIG_IMX8QXP
+#define LVDS0_PHYCTRL_BASE	0x56221000
+#define LVDS1_PHYCTRL_BASE	0x56241000
+#define MIPI0_SS_BASE		0x56220000
+#define MIPI1_SS_BASE		0x56240000
+#endif
+
+#define APBH_DMA_ARB_BASE_ADDR	0x5B810000
+#define APBH_DMA_ARB_END_ADDR	0x5B81FFFF
+#define MXS_APBH_BASE		APBH_DMA_ARB_BASE_ADDR
+
+#define MXS_GPMI_BASE		(APBH_DMA_ARB_BASE_ADDR + 0x02000)
+#define MXS_BCH_BASE		(APBH_DMA_ARB_BASE_ADDR + 0x04000)
+
+#define PASS_OVER_INFO_ADDR	0x0010fe00
+
+#define USB_BASE_ADDR		0x5b0d0000
+#define USB_PHY0_BASE_ADDR	0x5b100000
+
+#endif /* __ASM_ARCH_IMX8_REGS_H__ */
-- 
2.14.1