[U-Boot] [PATCH 4/4] warp7: configs: add bl33 defconfig

[Bryan O'Donoghue]

From: Rui Miguel Silva <rui.silva at linaro.org>

Add default configuration to run u-boot as BL33 in the ARM Trusted Firmware
boot flow for AArch32 case.

Signed-off-by: Rui Miguel Silva <rui.silva at linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Maxime Ripard <maxime.ripard at free-electrons.com>
Cc: Lukasz Majewski <lukma at denx.de>
Cc: Tuomas Tynkkynen <tuomas.tynkkynen at iki.fi>
Cc: u-boot at lists.denx.de
---
 configs/warp7_bl33_defconfig | 42 ++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 configs/warp7_bl33_defconfig

diff --git a/configs/warp7_bl33_defconfig b/configs/warp7_bl33_defconfig
new file mode 100644
index 0000000000..bed970b014
--- /dev/null
+++ b/configs/warp7_bl33_defconfig
@@ -0,0 +1,42 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX7=y
+CONFIG_SECURE_BOOT=y
+CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_TARGET_WARP7=y
+CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp7/imximage.cfg"
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_SETEXPR=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DFU_MMC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_MXC_USB_OTG_HACTIVE=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
+CONFIG_OF_LIBFDT=y
+CONFIG_OPTEE_TZDRAM_SIZE=0x2000000
-- 
2.18.0