[U-Boot] [PATCH V2 1/2] mmc: omap_mmc: Remove invert references

[Adam Ford]

With DM_GPIO and DM_MMC translating GPIO_ACTIVE_LOW, any boards
using the 'cd-invert' option will no longer need to do this.  This
patch removes the support for 'invert' from the MMC driver.

Signed-off-by: Adam Ford <aford173 at gmail.com>
---
V2:  Don't include patch 1 with xlate.  It is not apparently needed.
     Remove cd_inverted from omap_hsmmc_plat

diff --git a/arch/arm/include/asm/omap_mmc.h b/arch/arm/include/asm/omap_mmc.h
index 42ce8dcd6d..6d31cc4422 100644
--- a/arch/arm/include/asm/omap_mmc.h
+++ b/arch/arm/include/asm/omap_mmc.h
@@ -68,7 +68,6 @@ struct omap_hsmmc_plat {
 	struct mmc_config cfg;
 	struct hsmmc *base_addr;
 	struct mmc *mmc;
-	bool cd_inverted;
 	u32 controller_flags;
 	const char *hw_rev;
 };
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 8ab56d247d..e9786ec5bb 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -83,7 +83,6 @@ struct omap_hsmmc_data {
 #if CONFIG_IS_ENABLED(DM_MMC)
 	struct gpio_desc cd_gpio;	/* Change Detect GPIO */
 	struct gpio_desc wp_gpio;	/* Write Protect GPIO */
-	bool cd_inverted;
 #else
 	int cd_gpio;
 	int wp_gpio;
@@ -1377,8 +1376,6 @@ static int omap_hsmmc_getcd(struct udevice *dev)
 	if (value < 0)
 		return 1;
 
-	if (priv->cd_inverted)
-		return !value;
 	return value;
 }
 
@@ -1860,10 +1857,6 @@ static int omap_hsmmc_ofdata_to_platdata(struct udevice *dev)
 	}
 #endif
 
-#ifdef OMAP_HSMMC_USE_GPIO
-	plat->cd_inverted = fdtdec_get_bool(fdt, node, "cd-inverted");
-#endif
-
 	return 0;
 }
 #endif
@@ -1892,9 +1885,6 @@ static int omap_hsmmc_probe(struct udevice *dev)
 	priv->base_addr = plat->base_addr;
 	priv->controller_flags = plat->controller_flags;
 	priv->hw_rev = plat->hw_rev;
-#ifdef OMAP_HSMMC_USE_GPIO
-	priv->cd_inverted = plat->cd_inverted;
-#endif
 
 #ifdef CONFIG_BLK
 	mmc = plat->mmc;
-- 
2.17.1