[U-Boot] [PATCH 0/3] add optional hex output of u-boot-spl
Simon Goldschmidt
simon.k.r.goldschmidt at gmail.com
Mon Sep 10 18:06:55 UTC 2018
On 10.09.2018 19:28, Dalon Westergreen wrote:
> This patch set adds a possible hex output of the
> u-boot-spl elf and enables said output for the
> Intel Stratix10 device. Stratix10 requires a hex
> output of the elf for creating the secure device manager
> configuration bitstream.
I don't use Stratix10 but Cyclone5, but as I need a .hex to boot from
FPGA, I want to know how to solve this best.
So to understand this, again a question: is this the only way to boot
Stratix10? Or one of the possible boot methods?
Because reading "Intel® Stratix® 10 SoC FPGA Boot User Guide", it seems
like you would need the hex for "FPGA Configuration First Mode", but not
for "HPS Boot First Mode"?
If so, it would make Stratix10 and Cyclone5 more alike and a
configuration option (like "Boot from FPGA") could be used to control
CONFIG_OF_EMBED and enable creating the hex file for SPL.
I *am* working on fixing the "boot from FPGA" case for Cyclone5, so I'd
appreaciate it if we could share as much as possible between those
sub-architectures.
Simon
>
> Dalon Westergreen (3):
> common: add spl/u-boot-spl.hex target
> arm: socfpga: stratix10: add CONFIG_SPL_TARGET
> arm; socfpga: stratix10: Add CONFIG_OF_EMBED
>
> Makefile | 5 +++++
> configs/socfpga_stratix10_defconfig | 1 +
> include/configs/socfpga_stratix10_socdk.h | 3 ++-
> 3 files changed, 8 insertions(+), 1 deletion(-)
>
More information about the U-Boot
mailing list