[U-Boot] [RFC PATCH v1 2/2] board: ks2: move uinitrd fixup logic inside ft_board_setup_ex

[Nicholas Faustini]

The uinitrd fixup logic should be executed after the FDT /chosen
node has been properly populated by fdt_initrd()

Signed-off-by: Nicholas Faustini <nicholas.faustini at azcomtech.com>

---

 board/ti/ks2_evm/board.c | 44 ++++++++++++++++++++--------------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c
index 274f18e942..d81c8e621f 100644
--- a/board/ti/ks2_evm/board.c
+++ b/board/ti/ks2_evm/board.c
@@ -146,14 +146,10 @@ int ft_board_setup(void *blob, bd_t *bd)
 	int nbanks;
 	u64 size[2];
 	u64 start[2];
-	int nodeoffset;
 	u32 ddr3a_size;
-	int unitrd_fixup = 0;
 
 	env = env_get("mem_lpae");
 	lpae = env && simple_strtol(env, NULL, 0);
-	env = env_get("uinitrd_fixup");
-	unitrd_fixup = env && simple_strtol(env, NULL, 0);
 
 	ddr3a_size = 0;
 	if (lpae) {
@@ -191,24 +187,41 @@ int ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory_banks(blob, start, size, nbanks);
 
+	return 0;
+}
+
+void ft_board_setup_ex(void *blob, bd_t *bd)
+{
+	int lpae;
+	u64 size;
+	char *env;
+	u64 *reserve_start;
+	int unitrd_fixup = 0;
+
+	env = env_get("mem_lpae");
+	lpae = env && simple_strtol(env, NULL, 0);
+	env = env_get("uinitrd_fixup");
+	unitrd_fixup = env && simple_strtol(env, NULL, 0);
+
 	/* Fix up the initrd */
 	if (lpae && unitrd_fixup) {
+		int nodeoffset;
 		int err;
-		u32 *prop1, *prop2;
+		u64 *prop1, *prop2;
 		u64 initrd_start, initrd_end;
 
 		nodeoffset = fdt_path_offset(blob, "/chosen");
 		if (nodeoffset >= 0) {
-			prop1 = (u32 *)fdt_getprop(blob, nodeoffset,
+			prop1 = (u64 *)fdt_getprop(blob, nodeoffset,
 					    "linux,initrd-start", NULL);
-			prop2 = (u32 *)fdt_getprop(blob, nodeoffset,
+			prop2 = (u64 *)fdt_getprop(blob, nodeoffset,
 					    "linux,initrd-end", NULL);
 			if (prop1 && prop2) {
-				initrd_start = __be32_to_cpu(*prop1);
+				initrd_start = __be64_to_cpu(*prop1);
 				initrd_start -= CONFIG_SYS_SDRAM_BASE;
 				initrd_start += CONFIG_SYS_LPAE_SDRAM_BASE;
 				initrd_start = __cpu_to_be64(initrd_start);
-				initrd_end = __be32_to_cpu(*prop2);
+				initrd_end = __be64_to_cpu(*prop2);
 				initrd_end -= CONFIG_SYS_SDRAM_BASE;
 				initrd_end += CONFIG_SYS_LPAE_SDRAM_BASE;
 				initrd_end = __cpu_to_be64(initrd_end);
@@ -240,19 +253,6 @@ int ft_board_setup(void *blob, bd_t *bd)
 		}
 	}
 
-	return 0;
-}
-
-void ft_board_setup_ex(void *blob, bd_t *bd)
-{
-	int lpae;
-	u64 size;
-	char *env;
-	u64 *reserve_start;
-
-	env = env_get("mem_lpae");
-	lpae = env && simple_strtol(env, NULL, 0);
-
 	if (lpae) {
 		/*
 		 * the initrd and other reserved memory areas are
-- 
2.17.1


-- 
Disclaimer: This email and any files transmitted along with it may contain 
Azcom confidential and proprietary information. If you are not the intended 
recipient, you are notified that disclosing, copying, distributing or 
taking any action based on the contents of the information contained herein 
is strictly prohibited.
If you are not an intended recipient of this 
transmission and you received it in error, please inform the sender by 
reply e-mail and destroy this and all other copies of this transmission to 
which you have access.
The sender of this email or Azcom does not accept 
liability for any errors or omissions in the contents of this message that 
may occur as a result.