[U-Boot] [PATCH 2/3] arm: socfpga: stratix10: add CONFIG_SPL_TARGET

[Marek Vasut]

On 09/10/2018 07:28 PM, Dalon Westergreen wrote:
> Stratix10 combines the u-boot-spl image into the fpga configuration
> bitstream so that the SDM can load the processors memory.  This
> process requires a hex format of the u-boot-spl image.
> CONFIG_SPL_TARGET is set to "spl/u-boot-spl.hex"
> 
> Signed-off-by: Dalon Westergreen <dwesterg at gmail.com>
> ---
>  include/configs/socfpga_stratix10_socdk.h | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/include/configs/socfpga_stratix10_socdk.h b/include/configs/socfpga_stratix10_socdk.h
> index b58f478004..91315a0031 100644
> --- a/include/configs/socfpga_stratix10_socdk.h
> +++ b/include/configs/socfpga_stratix10_socdk.h
> @@ -202,6 +202,7 @@ unsigned int cm_get_l4_sys_free_clk_hz(void);
>   * 0x8000_0000 ...... End of SDRAM_1 (assume 2GB)
>   *
>   */
> +#define CONFIG_SPL_TARGET		"spl/u-boot-spl.hex"
>  #define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_INIT_RAM_ADDR
>  #define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_INIT_RAM_SIZE
>  #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
> 
Applied to socfpga/master, thanks

-- 
Best regards,
Marek Vasut