[U-Boot] [PATCH 3/4] ata: Drop CONFIG_SYS_SCSI_MAX_* from boards using DM_SCSI

[Tuomas Tynkkynen]

These options are not used or necessary when device model is being used
for SCSI. Just drop them.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen at iki.fi>
---
 include/configs/dra7xx_evm.h    | 4 ----
 include/configs/qemu-arm.h      | 3 ---
 include/configs/x86-common.h    | 4 ----
 include/configs/xilinx_zynqmp.h | 7 -------
 4 files changed, 18 deletions(-)

diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index fcaf3a1e13..d8d6d2f6b0 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -113,10 +113,6 @@
 
 /* SATA */
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 
 /* NAND support */
 #ifdef CONFIG_NAND
diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h
index 66729b7d4f..5a12a32d39 100644
--- a/include/configs/qemu-arm.h
+++ b/include/configs/qemu-arm.h
@@ -20,9 +20,6 @@
 /* For timer, QEMU emulates an ARMv7/ARMv8 architected timer */
 #define CONFIG_SYS_HZ                       1000
 
-/* For block devices, QEMU emulates an ICH9 AHCI controller over PCI */
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID 6
-
 /* QEMU emulates the ARM AMBA PL031 RTC */
 #define CONFIG_SYS_RTC_PL031_BASE	0x09010000
 
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index f0b027e69c..ab345326e8 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -28,10 +28,6 @@
 #define CONFIG_LBA48
 #define CONFIG_SYS_64BIT_LBA
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
 /* Generic TPM interfaced through LPC bus */
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index a65e8fedff..0ab32611ce 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -122,13 +122,6 @@
 # define CONFIG_SYS_EEPROM_SIZE			(64 * 1024)
 #endif
 
-#ifdef CONFIG_SATA_CEVA
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
-#endif
-
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
 
 #define CONFIG_CLOCKS
-- 
2.16.3