[U-Boot] [PATCH 3/6] pico-imx6ul: Add a new defconfig with PICO-Pi selected

Otavio Salvador otavio at ossystems.com.br
Fri Sep 14 18:53:33 UTC 2018


This adds a new defconfig which pre-selects the PICO-Pi baseboard
allowing a completely non-interactive boot process.

Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---

 board/technexion/pico-imx6ul/MAINTAINERS |  5 +++
 configs/pico-pi-imx6ul_defconfig         | 53 ++++++++++++++++++++++++
 2 files changed, 58 insertions(+)
 create mode 100644 configs/pico-pi-imx6ul_defconfig

diff --git a/board/technexion/pico-imx6ul/MAINTAINERS b/board/technexion/pico-imx6ul/MAINTAINERS
index fec5868015..b8f3d24a53 100644
--- a/board/technexion/pico-imx6ul/MAINTAINERS
+++ b/board/technexion/pico-imx6ul/MAINTAINERS
@@ -10,3 +10,8 @@ TechNexion PICO-HOBBIT-IMX6UL
 M:	Otavio Salvador <otavio at ossystems.com.br>
 S:	Maintained
 F:	configs/pico-hobbit-imx6ul_defconfig
+
+TechNexion PICO-PI-IMX6UL
+M:	Otavio Salvador <otavio at ossystems.com.br>
+S:	Maintained
+F:	configs/pico-pi-imx6ul_defconfig
diff --git a/configs/pico-pi-imx6ul_defconfig b/configs/pico-pi-imx6ul_defconfig
new file mode 100644
index 0000000000..680438d265
--- /dev/null
+++ b/configs/pico-pi-imx6ul_defconfig
@@ -0,0 +1,53 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_PICO_IMX6UL=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_BOOTDELAY=3
+CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
+CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-pi.dtb"
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET_SUPPORT=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_DFU_MMC=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_FSL_ESDHC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_MII=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_OF_LIBFDT=y
-- 
2.19.0



More information about the U-Boot mailing list