[U-Boot] [PATCH v4 07/34] dt-bindings: w1-eeprom: ds24xxx: create bindings

[Eugen Hristev]

Bindings for Maxim's ds24 onewire EEPROM families driver

Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
---
 doc/device-tree-bindings/w1-eeprom/ds24xxx.txt | 37 ++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 doc/device-tree-bindings/w1-eeprom/ds24xxx.txt

diff --git a/doc/device-tree-bindings/w1-eeprom/ds24xxx.txt b/doc/device-tree-bindings/w1-eeprom/ds24xxx.txt
new file mode 100644
index 0000000..2e91be9
--- /dev/null
+++ b/doc/device-tree-bindings/w1-eeprom/ds24xxx.txt
@@ -0,0 +1,37 @@
+Maxim DS24 families driver device binding - one wire protocol EEPROMS from Maxim
+=======================
+
+This memory needs to be connected to a onewire bus, as a child node.
+The bus will read the device serial number and match this node with a found
+device on the bus
+Also check doc/device-tree-bindings/w1 for onewire bus drivers
+
+Driver:
+- drivers/w1-eeprom/ds24xxx.c
+
+Software ds24xxx device-tree node properties:
+Required:
+* compatible = "maxim,ds24b33"
+or
+* compatible = "maxim,ds2431"
+Further memories can be added.
+
+Optional:
+* none
+
+Example:
+	eeprom1: eeprom at 0 {
+		compatible = "maxim,ds24xxx";
+	}
+
+Example with parent bus:
+
+onewire_tm: onewire {
+		compatible = "w1-gpio";
+		gpios = <&pioA 32 0>;
+
+		eeprom1: eeprom at 0 {
+			compatible = "maxim,ds24xxx";
+		}
+};
+
-- 
2.7.4